My database has several tables (and queries) that have fields that contain people's names. Some names, like O'Neil, contain apostrophes. Other fields contain couple names, like Tom & Laura Jones. Both the ' and the & prevent queries, forms, and reports from working correctly.
View RepliesIn my database there is one value that requires the use of a /. (This is not as a name of anything...just a value stored in one of the fields.) I have a form which functions beautifully in all other regards, but it produces an error about syntax of the subquery in the expression if I try to use this value as a criteria for a search/filter (screen shot of error message attached).
I've tried using double quotes and square brackets around the / and a in front of it to no avail. I don't have the option of changing the value...it is defined by this multi-billion dollar project. Again, this is just a piece of data in a field in a record which also needs to be a criteria in some searches/filters.
Hi guys,
I have a question regarding special characters that access doesn't like to see.
When passing a string to be absolved via html, if I set myHtmlBody = "<font color="#000FF"></font> it will throw a syntax error because of the # character.
How can I solve this? Thx for any help.
I am exporting an Access table as an xml file and need to be able to identify and replace '&', '(' and ')' as they are not accepted in xml.
Does anyone know how a query can be built which will find these characters in fields and update to ' and' or just remove?
Thanks
Hi,
I'm not sure whether i'm in the right forum or not but i'll tell you my problem and if i'm not you can point me in the right direction.
I have a form with a text area which allow's the user to submit a comment to an Access database.
I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
but this only seems to happen when the following characters are used " . / * : ! # & - ? " in the message.
Can the settings in Access be changed to correct this problem
or is it a coding problem??
Any help would be greatly appreciated.
Thxs dinivan
I faced a dilemma over the weekend in that I needed to preview and then print the ascii character 219 (A black block) on a report. It overlayed a paper calendar form that we use to print temporary access passes for where I work. The black blocks would indicate the days for the pass. Unfortunately, using Chr(219) did not work - so I searched the forums here and had a bit of luck, but still the solution remained elusive. Finally (and I should have done this first :)) I went to Help in access and found the answer.
To view or print any special character go to the start button on the computer, then navigate to programs, then accessories, then tools, then character map. Once there, choose whatever character you want and write down the Unicode number that applies. In my case, 2588. Convert that to decimal (Because it is in Hex) to 9608 and use an SQL statement Yourfield = ChrW(9608) to view or print it. The W is added to let the program know that this is a Unicode character and not ascii.
I read a lot of ingenious solutions in the forum, but this one seems to be the most straight forward.
My search has been unsuccessful due to the search function refusing to play nicely with me and the fact that it's mixing up the problems with using special characters with field names, which isn't what I want.
My problem is I have comboboxes that looks up people's name and has a NotInLIst event to allow addition of new person. It uses split function and concentating query to keep data normalized while displaying the full name.
Access trips over, very hard, whenever there is a name that uses special character, which for obvious reasons, causes confusion. Example:
Mike O'Leary
Thomas O'Calloway
Janet Smith-Johnson
Mary-Ann Johnson
Can anyone point me to a snippet I could use to trap for those names and help Access deal with it accordingly?
Thanks in advance.
I have a Memo field that is used to be a description of a document. I don't know what the user will put in (could be anything), but it is eventually passed in a string to a query, etc.I discovered during testing that if an apostrophe is entered (Ex: This document explains how to deal with Joe's pleasant disposition.), it breaks my code. I then realized that all reserved words and characters would cause this problem.
I can get around this one just by using Replace(str, "'", "''"). However, I know there are others that will cause problems, and I don't want to end up with a string of replace statements just to fix them.
I want my to detect special characters in my descriptions that are not found on keyboard and display as error.
Tried using the following
Description check: IIf([Common Description] Is Null Or [Common Description] Not Like "*[!a-z0-9@=.^_$%!#&'`(){|}*?~[]/-]*" And [Description Local] Is Null Or [Description Local] Not Like "*[!a-z0-9@=.^_$%!#&'`(){|}*?~[]/-]*","<<Error Desc>>","OK")
but when i tested it using some data, it shows all as <<Error Desc>>
some of the special characters i want to check for are βuΩ etc.
So if my description contains characters that are not: a-z OR 0-9 or any of the following ~!@#$%^&*()_+=-`][';/.,<>?:"{}|~
it will return <<Error Desc>>
I have a table called: "tb_special_characters" with a field name [character]. In this table are values that I would like to remove from fields in another table ("tb_data", field name [Title]
The values in the "tb_special_characters" are thinks like
.
@
}
I'd like to run a query on tb_data.title that would replace any matching characters in tb_special_characters.character with nothing (I remove and close any spaces).
I'm trying to export either a report or a query to excel with a field name that has special characters "()". I wouldn't normally ever do this (everyone knows not to use special characters) but we're using this to import the excel document to a website, and the field name MUST be what they specified in order for the import to be successful. Is there any way to rename the field name at export, since I can't use special characters on the query or report itself?
The field name is currently DepType, but it must be
"
*Dependent Type
Spouse/Partner or Child/Dependent
(Required for Dependents only)
"
EXACTLY or it will not import.
I am trying to query on a field for any that contain special characters. How can I accomplish this? I do not know what special characters could be in this field, so I would want to query for ANY special character.
View 2 Replies View RelatedIn vba I need to check a specific field (ID) for special characters used in that field. The characters to check for are:
' " ! * # & ^ % $ " : ; | < > ? @ { } [ ]
The code I have is:
strSQL = "SELECT ......... "
Set rs = db.OpenRecordset(strSQL)
rs.MoveFirst
Do While Not rs.EOF
rstTest.AddNew
rstTest("ID").value = rs![ID]
rstTest.Update
rs.MoveNext
Loop
I need to know what I should put after "SELECT
Hello,
I have an unbound form where the user enters feedback, usually > 255 chars. When they hit the "Submit" button, an append query adds this to a memo field on a table. A memo field should be able to hold 65,000 some characters however everything after 255 turns into a special character, mostly boxes. Any ideas on how to retain the text?
Thanks for any suggestions!
Stone
Is it possible to query a field for special characters in a string? I want to find any records that have characters other than A-Z, 0-9
View 9 Replies View RelatedI use the below code as part of a database which creates documents and then saves them using data from the form fields.
Every now and again one of the form fields contains a "special" character such as /,@,& and this prevents the file from saving.
Is there a simple addition to the below code to remove special characters from the file name if there is one present?
It causes all sorts of issues as many people don't realise that there has been a problem until it is too late.
Code:
objWord.ActiveDocument.SaveAs2 FileName:="C:UsersPublic" & Forms![Front Page]![Site 2 Name] _
& " " & Forms![Front Page]![Combo79] & " " & "O2" & ".doc"
objWord.ActiveDocument.Close
I have an asset database I am designing to manage our computer inventory and assets.
I am trying to get a DLookup to work with one of my forms that will auto-populate some of the fields depending on what is entered in to the ProductID field. For instance, Make, Model, Asset type...
My problem is that the string that returns contains special characters, specifically "#" and gives me the error message -
Run-time error '3075':
Syntax error in date in query expression 'productID=EN371UA#ABA'.
My expression is definitely working, it just looks like it things it has something to do with date/time which it does not. Unfortunately, most HP equipment contains a # in the Product ID number.
Here is my expression -
Private Sub ProductIDCombo_AfterUpdate()
Make = DLookup("Make", "productlist", "productID=" & [ProductIDCombo])
End Sub
Make is the field I am looking up from the ProductList table. The Product ID is the ID I'm looking up from the ProductList table to find the make. My problem is actually getting it to return the correct value of "HP or Dell or Lenovo". etc.
I thought I had solved my initial problem of removing the apostrophe character for each zip code field. Most of the fields have data that reads '12345-1234'. I want to remove each (') character and the "-1234" so I end up with a zipcode of 12345.
I created 2 queries for this process. I first run a query with the following statement "Left([ZIP],Len([ZIP])-6)". That gets rid of the "-1234' ".
The I run the second query with this statement "Right([ZIP],Len([ZIP])-6)".
These 2 queries work perfectly if the original zipcode is " '12345-1234' ", but if it is " '12345' ", the entire zipcode is deleted.
I have attached 3 (.jpg)'s to show you what I am talking about.
I have a data base,one of the field contain Data like "ZZZ-DEFS#UUH1234567".
There should always be 19 characters in this field including #.I want to design a query which can sort out entries less than and more than 19 characters, so that wrong entries can be corrected .
I'm trying to paste the values of worksheet 1 by value. Please see the attached two files.
When I run the code, it indicates that variable ( xlpastevalues) is not defined.
It is not a variable....
Code:
Private Sub Command0_Click()
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
xlApp.Workbooks.Open "Your locationmetric_DEV.xls", True, False
With xlApp.activeworkbook.worksheets("Metric summary")
.usedrange.copy
.range("A1").pasteSpecial paste:=xlPasteValues
End With
End Sub
I have created inventory databases for both my job and personal use. I do not understand coding. I either need a good hand-holding with simple, detailed instructions or I need to hire a code person.
A button in my form that can be coded to ... When clicked ...
___ open a browse window of hard drives,
___ allow user to choose any single image for selection,
___ copy & paste selected image's location to a table field.
NOTE: Table field will be used to connect to image place holder on form with control source to make the image seen.
File import with special heading
ABC. or 123.
First time the file import, system will ignor the "full stop" into the table. But next time when I try to import to update the table, system error can not identify the heading.
I want to hide the Navigation Pane as well as the full menus and "special keys". I do that by going to the options tab and removing the appropriate check marks.However, it does not seem to work! No matter how many times I do it, if I hold the shift key, the navigation pane is still there.
View 14 Replies View RelatedI have a text such as "Arun-Halyal-12". I need to extract "12" from the text in MS Access query. What formula i have to add in query to get "12".
View 3 Replies View RelatedI am trying to create a Special Recorded tracking database where a member of staff will log the tracker number into the database and then at a later date someone can come and update the data, what I want to do is scan the tracker barcode with a scan gun and its details appear for updating, I can do this part but when I make any amendments to the data it doesn't save the new data and I don't know why? I am using a combobox to display the tracker number and me.text1.value = me.combo4.column(1) and so on and so forth to display the data, when I change this data it doesn't save.
View 1 Replies View Relatedthe access database is about contracts.Each contract has an ID. So starting from ID1 to ID250. Right now i export in via VBA to excel. I have to create before in the excel the 250 tables. If the ID10 is not existing anymore i still have the table 10 left and then i have to delete this table.
Code:
Dim xlSheet As Object 'Excel.Worksheet
Dim rstID As DAO.Recordset, tmpStr As String
Dim rstGr As DAO.Recordset, strSQL As String
[code]....