Have a text field in a form with following relevant properties:
Format tab - Format: Short Time
Data tab - Inputmask: 00:00;0;_
Data tab - Default value: =Time()
Goal: show a default but editable current time in HH:MM format
Behaviour: When entering form current time is displayed in HH:MM - problem is that when I enter field with the curser it automatically changes format to HH:MM:SS.
I have a form that is locked unless they click the command button to edit records. I want a msg box that when they click the close button it pops up with something like save edits? Just as an extra precaution. But I only want the message box to pop up if the form is in edit mode. Is this possible? And I would like to be able to have them click ok or cancel in the message box
Here is the code for the close button:
Private Sub Close_Click() On Error GoTo Err_Close_Click
I have added a popup menu to my form to reduce the number of buttons needed. I would some of the options only available in the add or edit mode. Because its not a traditional button i dont think conditional formatting applies. Can someone give me a hint where I should be heading?
I have a form with a duplicate record button.Sometimes when duplicating a record the duplicate is created but the form remains in edit mode (small pencil in the form margin).I also have a manual record counter on the form which does not refresh to the newest record number following the duplication? Both issues happen together and not independently.
I now have the standard MS Access record counter visible on the form to see whats happening and this always jumps correctly to a new record number when duplication is triggered, so when the problem happens the MS Access counter is showing one more than my own record counter.
If I use the standard MS Access record navigation buttons and go back and then forward by one record, the duplicated record is then corrected. The edit mode pencil is gone and both record counters read the same, which I assume has happened this has forced a save to happen
If Me.Dirty Then Me.Dirty = False End If
- in the current event of the form, would solve the problem, but it doesnt make any difference at all, its still no better, or no worse than before?Using CTRL + S removes the pencil, but doesn't correct my bespoke record counter?
I have set a field on my FORM with the General Date format. Every time I use the date picker it inserts the correct date with a time of 00:00? I even changed the format on my table to general date - still no luck.
I have several comboboxes in my database from which users select values. However, in most cases, I do want to give them the option to add an item that does not appear while simultaneously updating the underlying table which stores those dropdown values. I have made use of the builtin "allow edit list items" feature of Access 2007 but the form always opens on the first record of the form on which they are to add the new item. Is there a way to specify that it should open in Data Entry view apart from using VBA?
I have a series of fairly large csv files which I need to consolidate by importing them to a single Access database. There are of the order of 50-60,000 'lines' per csv and about a dozen different files (all comma de-limited and text-qualified with inverted commas).The problem I have is, there are several date fields within the csv which are not formatted to Access' liking. Namely <Mmm_dd_yyyy_hh:ssAM> with underscores used here to represent spaces.
So for example, today's date appears thus :
Feb 6 2013 12:00AM (i.e. two spaces between 'Feb' and '6')
And this day next week would appear thus :
Feb 13 2013 12:00AM (i.e. one space between 'Feb' and '13')
I will obviously need this field recognised as Date/Time so I can query appropriately but I have no control over the source data and need to find a way of converting the format.One option would be to run a script on the csv's themselves prior to importing but I'm not sure how to do that.import this field as Text and then edit the contents after import (VBA?), such that the field can be redesignated with a data type of Date/Time.
I 'm downloading the excel data from the site and connecting it to access.
In excel the particular column (Time Taken) is in the format of "00:12:26".
After connecting it to access and appending it to the table, the format changed to "12:12:26", the first two digits changed to "12" and the remaining are as it is how it looks like in the excel. I need to change it to format what it looks like in the excel.
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
I wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
I am having problems opening my databases. Access automatically opens them in 'Read Only' mode, and I cannot find a way to avoid this - so I can never add data to the original tables ....
I'm trying to show the modal value of a column in a query that only has text in, not numbers. I want to present this in a text box in a report.
My report already has a query as its record source that only shows data for a given year and given month, these are chosen using parameters created in the query. Thus all I need to figure out is how to show the modal value for the column "Categories" on the report somehow.
I have a button on my form that should open a report in Preview node.
On SOME users machines, it appears that absolutely NOTHING happens when the user clicks the button. (preview mode)
Report parameters that may have some bearing are as follows. (Default settings in most cases) Default View : Report View Allow Report View: Yes Allow Layout View: Yes Auto Center : Yes Auto Resize: Yes Fit to page: Yes
Pop_up: Yes (This is NOT the default setting, as I would prefer the report to pop-up. If the report does not open in pop up mode, the users tend to close the DB instead of just the report.)
On the user machines where the problem exists, I have turned off the pop-up blocker in their web browser. It seems to work when opening in Report View.
Button Macro parameters are: Report Name: My_Rpt_Name View : Print Preview Filter Name : Where Condition : Window Mode : Normal
Environment SQL back end (ODBC Connection to server) Access 2010 Front end
I am developing the DB in the bog standard install with no special permissions / add-ons. Also, my developer (log on) account is as a standard user, so there should be no (network) permission issues.
When troubleshooting on the user machines, If I open the report in design view and then open in Preview mode, it works.
Is the problem with the Form or the Macro or the Preview mode or maybe some Reg key that must be changed to allow reports as pop-ups?
We have been calling a main form to manage yacht races using a hyperlink/macro from a selection form which lists all the yacht races ..The main form was too big to fit on some screens so we changed it to pop up mode to allow it to be resized and use scroll bars. this works well when the form is opened manually and all functions run just fine
the hyperlinik/macro for race selection had originally been set up to call the main form in dialog mode but we have had to change this as it disabled the resizing of the form and the scroll bars..The macro tool doesn't offer pop up mode so i selected window mode = normal and the main form opens with a resizable window and scroll bars but all the functions called from this module now fail (error message = use of null value or similar and all the functions go into debug mode - the server is down and i can't access the system to get the exact details)
If i change the macro in the selection form back to window mode = dialog the functions work but i lose the resizing of the main form and and the scroll bars.
I'm working in Access 2010. I created a database that I want to post in a server on the read-only mode, so that users can not change forms or querys. How can I do this in Access 2010?
I have two separate database files, a front end with all my forms and a back end with all my tables. The backend is stored on a network drive, is there any way of being able to store the frontend on the drive with the backend? Users do not use the actual computer to store information or access files, everything is usually saved on the network drive. I have created a shortcut that launches the front end database in the read only kiosk mode.
I've run into a bug, I think. I have a time field with it set to show "Medium Time" which is "hh:mm(AM/PM)", however, when I combine the information with another field in a query (=[OfficeDay]&" - "&[POfficeTime]), the time comes out as "Long Time" or "hh:mm:ss(AM/PM)". End result is Wednesday - 10:30:00AM when it should be Wednesday - 10:30AMDoes anyone know a way around this?
I'm working on a login form and *not thinking* I removed access to the submenu. I had already set the form up so that you either login correctly or exit the program. I'm working in code for the form and I know it's possible to reactivate the menu in code, I just don't know how. And I can't switch to design mode. The form is set up to not allow anything to happen until the correct login has been entered, and I either had a typo when I set up my test login or the program is bugged and only says it's incorrect....
