General :: Use Lookup Field As Control In QBF As Opposed To Text Box?
Aug 9, 2013Is there any way to use a lookup field as the control in a QBF as opposed to a text box?
View Replies
ADVERTISEMENT
General :: Lookup Combobox - Field Show Number Instead Of Text In Listbox
Jul 7, 2014I have a field in a table where it is a lookup is a combo box. So this makes the data type of the field a number when in reality it is a text. When I have this field show in a list box it shows the number instead of the text.
View 5 Replies View RelatedGeneral :: Form Control To Combine Multiple Field Values Into A Single Text Box?
May 10, 2013I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Code:
=IIf(Nz([MasterCasemaxUnits],[MasterCaseMinUnits])=[MasterCaseMinUnits],[MasterCaseMinUnits],[MasterCaseMinUnits] & " - " & [MasterCaseMaxUnits])
When I run my report, the control displays: #Type!
DLookup To Display Date In Text Box On A Tab Control Where Criteria Is Text Field
Apr 15, 2014I'm trying to pull a date from a table into a text box on a form tab control using DLookup and I just can't figure out what is wrong with my DLookup expression:
=DLookUp("DateOrdered","tDateOrdered","PrNumber=" & [PrNumber]) ----- (DateOrdered is short date, PrNumber is text, db is split Access 2013)
Whats missing in this expression? I've tried every criteria variant I could find but to no avail.
General :: If Expression In Default Control Of Text Box
Oct 10, 2012I would like to be able to put an if expression in the default control of a tx box.
I would like to say
if txtA = 0 then [Forms]![frmNewAppointment]![OrderTime] else [Forms]![frmAppointmentTreatmentItems]![TextA]+[Forms]![frmNewAppointment]![OrderTime]
Is it possible and am i close to doing it mysel?
General :: Lookup Into A Table - Populate Same Field
May 28, 2014I have a table holding a list of post codes, and their servicing depot EG -
ID Postcode Depot
1 AB10 Edinburgh
2 AB11 Edinburgh
Then a form, which has a field for depot ( Fld_Depot )
What i would like is, when the user clicks on the field, a msg box prompts, asking for them to input a postcode
Once the postcode is entered, it populates that field with the relevant depot from the table....
General :: Create A Field Lookup With Value That Specify In A Form That TYPE In
Jul 17, 2013I wanted to create a field lookup with values that I specify, not on the table sheet, but on the form. User can click on a text box or combo box and can select a list of value that I specify, not values that are listed on a table but ones that I type in, in the form.
View 11 Replies View RelatedGeneral :: Lookup Field - Adding Another Column To Enter Data
Aug 2, 2013I have got a a form storing all employee's information and on that form I have a lookup field which looks up all the records in the "Qualification table" and the user can select multple qualifications. What I want to add to the lookup field is a data box so you can select a qualification and then enter the date that it expires (different for expiry date for each employee) How do I do this?
I have added the date field to the qualification table but when I create the lookup field on the form it shows the qualifications and a blank column next to it which data can't be enteed into.
Tables :: Lookup Field Using Another Multi Value Lookup Field As Data Source
Nov 23, 2012how to do a particular thing in Access 2010 (I don't even know if it is possible).
I have a table named PRODUCTS:
ID_PRODUCT (primary key, autonumber long integer)
ALLOWED_OPTIONS (multi value text lookup field: "Option 1";"Option 2";...;"Option 9")
So I can store, for each different product, none, one, or more options to let the customers choose from.
I have a table named ORDERS:
ID_ORDER (primary key, autonumber long integer)
FK_CUSTOMER (foreign key, linked to the primary key of a CUSTOMERS table; represents the customer that places the order.)
FK_PRODUCT (foreign key, linked to PRODUCTS.ID_PRODUCT; represents the product that the customer has choosen)
CHOOSEN_OPTION (lookup text field; the customer must choose ONE option among those allowed for the product he has ordered)
The problem is that I would like the CHOOSEN_OPTION field to show as a combobox, listing the values stored into PRODUCTS.ALLOWED_OPTIONS, so that when a customer buys a product, he can choose only among the options allowed by that particular product.How can I manage a multi value field to populate a combobox, in which every item stays on its line? If I use, as a query to populate the combobox:
select [PRODUCTS].[ALLOWED_OPTIONS]
from PRODUCTS
where [PRODUCTS].[ID_PRODUCT]=[FK_PRODUCT]
I obtain an empty combobox.If I refer to the last field as [ORDERS].[FK_PRODUCT], Access asks me to type a value for "[ORDERS].[FK_PRODUCT]", treating it as an unknown parameter.I think that the problem is that when the combobox expands, the record is not committed yet, so FK_PRODUCT is unknown (NULL?). But this happens even if I commit the record typing something in FK_PRODUCT and then I re-enter the record and I expand the CHOOSEN_OPTION combobox, that is still empy although FK_PRODUCT exists, now.Is there a particular syntax to refer to a field in a record not committed yet (something like "THIS." or "ME.")?
Forms :: Text Default Value For Control Box Bound To Number Field?
Jul 14, 2014Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
General :: Control Source - Set Value Of A Combo Box To Time Field
Oct 10, 2012i have a list box with 6 columns. in column 6 there is a time field. on selecting this list box i want to set the value of a combo box to the time field.
so in the control source i put
[Forms]![frmAppointmentTreatmentItems]![comboTreatmentDuration]
This has no effect. I am not sure if i have done this correctly. but the combo box has manual values in it. the reason i want to have values in it is so if the treatment is 45 minutes at default. But i want to change it to 30 minutes just for a single occasion then i thought that this would be the way to do it.
General :: Cannot Find Specific Field On Control Source List
Sep 17, 2014I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
General :: VBA Error Referring Control Field In Subform Using Main Form
Feb 22, 2013I believe I did this before awhile ago but for some reason I keep getting an error.
I have a Mainform (frmMain) that has a Subform (frmSub). On frmSub I have 2 comboxes (strCom1 & strCom2) one is set to invisible (strCom2.Visible = No).
So using the "On Open Event" of frmMain I want make strCom2 visible if strCom1 = "Read Only". Ofcourse I will also need to place the vba on the On After Update event. Below is what I have so far but doesnt work.
I get Run-time Error 2427 "You enetered an experssion that has no value"
Code:
Private Sub Form_Open(Cancel As Integer)
If Me!frmSub.Form!strCom1.Value = "Read Only" Then
Me!frmSub.Form!strCom2.Visible = True
Else
Me!frmSub.Form!strCom2.Visible = False
End If
End Sub
General :: Highlighting Particular Text From Nearby Field To Adjacent Field
Nov 4, 2013I am having a database in access and i want to highlight particular text from nearby column to the next column. For example,
--GCCCAGGCCCAAGAATGTCGCCGT GGAGGACTGTCTGTACATCAACGTGTTCGTGCCACGGCCCAGGCCCAAGAATGTCGCCGTCATGCTGT
GGATCTTCGGGGGTGGCTTCTGACAAGCTATTGTGTTCGAAT ACACTGATT
--CGAATGAACGCTGTCCCTTCCACTGCTGGCAACATGCTCCCAGCCTTCGACAATGGCCCTCAATTCGA
GGACTGGTTT CAACGAATGAACGCTGTCCCTTCCACTGCTGGAACTTCCGACTCCTTGTTGCCTAGAATGTCGCCGTCATGC
The first column text it should take as query and then it should only search the adjacent cell and highlight that. While searching in the internet i came across a code also, But i dont know whether i can use that code or not.
ALTER PROCEDURE [dbo].[Search]
(
@searchTerm nvarchar(100),
@style nvarchar(100) = 'font-weight:bold; background-color:yellow',
@maxLen INT = 100
[code]....
General :: Address Text Field / Focus Field
Sep 24, 2012-How can I address the fields on my forms? I just want to create a button that increases a value by one on click.I tried
FORMNAME.FIELDNAME = FORMNAME.FIELDNAME + 1
FIELDNAME = FIELDNAME + 1
FORMNAME!FIELDNAME = FORNAME!FIELDNAME + 1
but the button does nothing. And that is all I found by googling.
-How to focus a field at the beginning? I want to be able to start writing always in the same field.
FIELDNAME.SetFocus
does not work. I dont know if I made any mistake during creating tables and forms, but these codes should actually work, shouldnt they?
General :: Converting A Text Field Into A Date Field
Feb 12, 2014I have a text, date field I need to convert to a date field.For example: 2/11/14 is stored at text: 21114.How can I convert the 21114 into 2/11/14?
View 5 Replies View RelatedQueries :: Change In SQL All Columns To Sum Rather Than Group Opposed To Dropdown
Oct 24, 2014I have 30+ columns each table I need to change into sum of.. but its default is group by, and need to change multiple columns to sum - rather than manually each one..
View 1 Replies View RelatedSelecting From Table In Form Creating New Entries As Opposed To Using Existing
Sep 18, 2012I have setup a simple access database consisting of 3 tables
Volunteer
Id (PK)
Name
Job
Id (PK)
JobName
Link
Id (PK)
VolunteerId (FK)
JobId (FK)
There is a one to many relationship between Volunteer and Link and a many to one between Link and Job
I want to create a form from which I'll select a Volunteer Name and then choose a JobName from a list box of options and have it create an entry in link with the id of the volunteer selected and the id of the job selected
So let's say there are 5 entries currently in the Job Table.. let's call the JobNames A,B,C,D and E.
In my form I select my name from the list (sourced from volunteer.Name) and then select B from the dropdown. My desired result would be a single entry gets created in Link with VolunteerId = 1 (representing me) and JobId = 2 representing the selection of B. Problem that I am having is that after I select B in the dropdown it creates a new record for B in Job and the Link table gets updated with that JobId as opposed to simply using the one that was already in the table.
General :: Text Box Based On Field Value
Jun 26, 2013Is there a way to have a text box filled out based on the value of a field. There will be only 2 possible phrases for the text box.
=IF( <Expr> Forms![Workorder]![Disposition])=("Return As Is","DISAPPROVE","APPROVE")
This is what I have tried but I get syntax error.The form is Workorder and the field is Dispostion. When the Disposition is "Return As Is" then I want to have the text box yield "DISAPPROVE" otherwise it should be "APPROVE".
General :: Input Value (Text) As Field Name
Oct 2, 2014Is it possible in Access to use an input value (text) as a field name? I want to access a field based on what the user enters.
View 6 Replies View RelatedObtaining Multiple Report Parameters Via Menu Form Lookup Control
Feb 11, 2015In our Student Administration database, we have a Student Evaluation Report which prints a 1 page per student report in memo like format. The instructor had previously input rating numbers (4=Best, 1=Worst) for 9 categories for each student via a database form into the Evaluations Table.
Two other elements of the rating are an Attendance based on number of days absent and a Grade Point Average (GPA) calculated from the student's test scores. The instructor then prints and reviews the report with each student.
There is an Evaluations Parameter table which has the following fields:
Field
Description
ID
The autonum key field.
Class
eg., 2015-1
Evaluation Number
A single digit (eg., 1, 2). There may be more than 1 evaluation for each class.
EffectiveDate
The "as of" date of the evaluation.
There are then several other tables that are input to a query that will be the record source for the report:
Table
Purpose/Data
Students
Student Name, Class
Absence
Has a record for each student's absence with date and a 1 or .5 indicating a whole or half day absent.
Test Grades
Has a record with each student's test results with date and score.
Evaluations
Holds the rating score for each of the 9 rating categories.
The Student Evaluation report is launched from an unbound Reports menu form via a button. On the Reports menu form I wish to have controls for the user to select which evaluation to report on. The Absence and Test Grade information needs to include records that are <= the EffectiveDate in the Evaluation Parameter table. The Evaluations records need to match the Class and Evaluation Number in the Evaluations Parameter table.
I would like the user to be able to select the Evaluation Parameter via a combo box vs. specifying the Class, Evaluation Number and Effective Date separately and then have the query record source for the report use those two fields as criteria. But my limited understanding of the Combo box indicates that only 1 field from the lookup query of the Evaluations Parameter table can be stored in the control whereas I need 3 (Class Evaluation Number and EffectiveDate).
How the user can select the desired Evaluation Parameter record on the Reports menu form and use the 3 fields from the selected record as criteria in the report's record source query.
General :: Field Was Changed From Text To Memo
Jan 6, 2013The database contains the records of a collection of thousands of photographs and negatives.
One of the fields contains information on the subject matter of each pic and can sometimes be very long. The field was changed from text to memo so as to hold more characters but they appeared in one long string, which means a lot of scrolling to see the information. That has been changed back to text and we are adding a second or third record such as xxx-xxx-xxx cont1 xxx-xxx-xxx cont2 so as to get shorter strings. Is there a way to make the text wrap onto a second or third line automatically after a specific number of characters have been entered or can a carriage return be put in to force the text to a new line?
General :: How To Get Computer Name And Display It In Text Field
Mar 25, 2014How can i get the computername and display it in a text field in ms access 2013.
View 14 Replies View RelatedGeneral :: Set Text Field To Show Particular Time For Current Day
Aug 7, 2013How can i put a fixed time for the current date in a text field.
So the field will be 06:00:00 for the current day when the form is open?
General :: Default Value Of Text Field With Selection Of Combo Box
Sep 9, 2014In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
General :: Auto Generate ID Where Field Is Text Format
Jul 10, 2012I have
Table called "Products"
Field 1= "Product ID" which is a text field (PK) but numbers are used (ie 1 -20)
Field 2= Products -showing our list of 20 products
When I enter a new product, currently I have to look in the table to find the last ID used then use the next one available. I have created a form to be used for data entry to enter new products
What I am trying to do is :- 1, have the form open at data entry level but still able to scroll and see all records and 2, Have the form auto generate the next number available. For example, I have 20 products entered so when the form opens to enter a new product, the ID is automatically at number 21. I know absol nothing about coding. I have looked at other suggestions on the forum incl the DMAX +1 and having tried and not worked, I wondered if its because the field is a text field or I am trying to insert the code in the wrong place.