General :: Using Command Button To Save New Record
Dec 7, 2012
I have have a form with 4 subforms in it, one of the subforms is based on a filtered query . For a reason I can not work out I cannot get it to requery when I add a new record.
To add a new record I select from a combo box and use a command button to save the record
I have tried using this in the buttons on click event
Code:
Forms.trialcatalogueF!TrialCompetitorsSF!competitorsSF.Form.Requery
with no result, however it does kinda work in the combo's after update event, just not until I select another value.
View Replies
ADVERTISEMENT
Sep 30, 2014
I have a form named CORRES_TYP with 3 text boxes and a list box. I also have a separate table with 3 field from where the information I put in the form was saved.
In my form whenever I put information on the textbox at hit add record button, these information are saved in my table and will reflect on the listbox on my form below the textboxes. Also if I select a record in the Listbox the record I selected will apprear on the corresponding textbox in the same form.
My problem is that I have been trying to create a command button that will save and change the existing record everytime I select an item in the list box and modify the information through the textbox. Here are some infromation about my table and form:
Table name = CORRES_TYP
Field 1 = CODE (Primary key, No Duplicates)
Field 2 = DESCRIPTION
Field 3 = FOLDER
Form name = CORRES_TYP
Textbox 1 = CODE
Textbox 2 = DESCRIPTION
Textbox 3 = FOLDER
Listbox name = LIST14
View 9 Replies
View Related
Apr 7, 2014
I am creating a small database to record payments.
There are three tables :
Supplier - tblSupplier
Payments - tblPayments
Invoice - tblInvoice
There are two Forms :
frmPayments (Bound to tblPayments) - Main Form for payment entry.
frmInvoice Sub (Bound to tblInvoice) - Sub form to display not paid invoices.
What i need is a Command button , lets named it "Commit", to perform a few tasks :
1. When click, prompt message asking whether to Save current payment record when all relevant input is completed during data entry.
2. If Answer is "Yes", then it will compare the "Invoice No" on the Main Form with the "Invoice No" of the Sub
Form , and if found to match, then put a tick in the "Yes/No" field of Invoice Table (tblInvoice) against the matching "Invoice No" of Main Form. This is to record payments made to this particular Invoice in Invoice Table.
3. Proceed to save current record, Refresh Main Form to be ready for a new data entry.
4.If Answer is "No", discard all current entries in the Main Form, Refresh to be ready for a new data entry.
Sample DB is attached...
View 1 Replies
View Related
Dec 2, 2006
Hey all,
I am embedding a MS Access 2003 Database form into web page (iframe) by creating a "Data Access" form.
I have created it all and it works fine. But there is one last thing i need to sort out.
When the user clicks the Submit button (Really a Save Record Button), i would like the button to also forward the visitor to a basic "Thank You" html page, in the actual iframe. At the moment the record saves, but it doesn't give the visitor any acknowledgement that they submitted successfully.
What code do i need to add to the <Button> code on the Data Access form, in order to create a hyperlink. I am not too familiar with VB.
Thanks.
View 3 Replies
View Related
Oct 11, 2013
I have created a form with subform on it having one to many relation .
I have created a save button on main form and edited the before update property of main form to require the click on save button to update the record.
But when i enter the fields on form and click inside subform to enter child values , all the main form data is removed automatically .
What am I doing wrong i just wanted to save only when user clicks the save button. (see the image attached)
View 6 Replies
View Related
Nov 6, 2013
I have generated a report in acviewreport, after viewing the details I want to save the report as a pdf file with the client name, invoice number and date. In the report design view I added a cmd button and successfully coded it. However, it saves the report WITH the cmd button showing. I don't want this button saved. Is it possible to remove the button from the report AFTER I have clicked it?
View 4 Replies
View Related
Feb 21, 2005
Hi all,
In access database project where my tables are linked from MSSQL server, how can I add record from the FORM itself using command button. Bcz it is not like mdb files in access that you can just drag a command button onto the form and take an action like add, delete, print or find rec. I just came to know it from immediate window using following SQL line;
Docmd.RunSql "Insert........
This is ok but how it could be done thru a command button on FORM.
Thanks in advance.
With kind regards,
Ashfaque
View 2 Replies
View Related
Apr 8, 2014
In Access I have created a button to print a preview prior to printing document it is entitle "NoVeteranMain" which works fine. Except I want it to save my document prior to printing preview how would I do it. If not after I edit it I have to re-save it prior to hitting button which generates print preview.
This is code that is generate upon click
Private Sub NoVet_Click()
DoCmd.OpenReport "NoVeteranMain", acViewPreview, , "ClientID = " & Me.ClientID
End Sub
View 5 Replies
View Related
Jul 16, 2012
How to restrict the updation of a record while entering until a save button is pressed on the form ???????? is it possible without the vba ?
View 10 Replies
View Related
Oct 26, 2005
I know you can create a find record command button really simply, which when clicked will display the find and replace window.
What i want to do is create a command button that will search a specific field that i specify in a report for the criteria i enter.
i.e i have a customer information form, which contains
AccountNo
CompanyName
Address
Postcode
Tel etc
what i want is a button that when clicked brings up an input field that allows the user to type the name of the company into this field, then when either the enter key is pressed or another button on this pop up window the matching record will be displayed or a error window stating that there are no matching records. Can anyone help me with this.
View 2 Replies
View Related
May 13, 2006
Hi,
I have a form that contains 2 subforms:
Purchase Order (Supplier, Order Date, Tel etc)
Purchase Order Details (Item Description, Quantity, Price etc)
This way I can have several items in 1 purchase order.
I now need to create a 'New Purchase Order' button. I've tried doing this but it only creates a new record for the form where the button is placed i.e. if the button is in the 'Purchase Order' form a new record is created for Purchase Order but NOT purchase order details.
Is there a way I can get the button to add a new record to 2 forms at the same time?
Thanks
View 1 Replies
View Related
Sep 7, 2006
Hi all,
I have a database for customer enquiries, and there is one record per product that the customer shows interest in. I want to have a button on the enquiry details form that creates a new enquiry but automatically fills in the contact details from the previous record.
Please also note that I do not wish to "normalize" this so that there is a seperate table for contacts and another for enquiries; it's much easier from our point of view to have the whole enquiry in one record, especially as this is a stand-in database before a fully integrated CRM is implemented. In any case most of the other data (e.g. product, category etc) is already stored in separate tables.
What sort of method do I need to use to create a Command Button that:
-Creates a new record
-Copies and Pastes data from selected fields into the new record?
I tried using the command button wizard for sample code but I got paste errors which were pasted into a new table, and I don't really understand the process of how this works as the Commands are numbers from a list (apparently in the macro window), which I can't find.
I'm using Access 2003 but the database file is in A2000 format. The code is below.
Thank you!
Private Sub ContactAddEnq_Click()
On Error GoTo Err_ContactAddEnq_Click
DoCmd.DoMenuItem acFormBar, acEditMenu, 8, , acMenuVer70
DoCmd.DoMenuItem acFormBar, acEditMenu, 2, , acMenuVer70
DoCmd.DoMenuItem acFormBar, acEditMenu, 5, , acMenuVer70 'Paste Append
Exit_ContactAddEnq_Click:
Exit Sub
Err_ContactAddEnq_Click:
MsgBox Err.Description
Resume Exit_ContactAddEnq_Click
End Sub
View 2 Replies
View Related
Nov 7, 2004
Hello all:
Code:
Private Sub DeleteRecords_Click()
Dim db As Database
Set db = CurrentDb
db.Execute "Delete * FROM tblJune 2005 applicants;"
End Sub
I am trying to delete all records from a dabase created in access. When I click the command button, I get this message: "User-defined type not defined"
Any suggestion on how to fix this error?
Many thanks in advance,
Dion
View 4 Replies
View Related
Mar 9, 2005
I have two table tbl_Employees and tbl_Femp my users use a form daily and now with help of baxter i'm finishing up on a new one. On my old form it was bounded and with a two step process check box and command button my users would send former employees to the former employees table, well i'm now using an unbound form and with the same script it will select all records and try to move them to the former employees table. here is my code:
Code:DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70Exit_saverecordcommand_Click: DoCmd.RunSQL "INSERT INTO tbl_Femp(FempID, FempLast, FempFirst, FempAdd, FempCity, FempZip, FempHomePhone, FempSSN, FempDOB, FempRank, FempRetCategory, FempComments, FempHireDate, FempRetDate) Select EmpID, EmpLast, EmpFirst, EmpAdd, EmpCity, EmpZip, EmpHomePhone, EmpSSN, EmpDOB, Rank, RetCategory, EmpHireDate, RetDate, RetComments from tbl_Employees where Retiredarchive =Yes"DoCmd.RunSQL "DELETE * from tbl_Employees where RetiredArchive = Yes"
Can some1 please tell me where i'm going wrong? thanks in advance...
View 9 Replies
View Related
Mar 28, 2008
I have set up a work order database. On the Work Order Submission form I have
a command button that adds the record to the table. I also have a button to
email the Submission Report. When the user fills out the form and clicks the
Add button the record is added to the table. The user then has to scroll to
have the record reappear in the form and then click the Email command button.
This works fine but I want to make this a one click operation.
I have a filter on the report that will be emailed to limit the report to just the current
record. The filter is:
[ID] = Forms![WO Submission]![ID]
where ID is the Primary Key for that record. If the record has not yet been
added to the table and thus has no primary key, the report to be emailed
will contain no record info.
I'm thinking I may have to use a temporary table but I'm clueless about how
to make that work.
Any suggestions?
View 1 Replies
View Related
Jul 12, 2013
I am trying to open MX Excel using a command button. I have tried using a hyperlink a various codes that i have found online with no luck. The Excel file is being used by the Access as it bring data from the spreadsheet a displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button i am met with errors and the file will not open.
View 6 Replies
View Related
Jul 27, 2012
I have a form. and it has three buttons. Such as Submit, Reject, Under Observation.
I want :
1) If i click SUBMIT button it will be disable and other two buttons REJECT and UNDER OBSERVATION will be enable
2) If i click REJECT button it will be disable and other two buttons SUBMIT and UNDER OBSERVATION will be enable
3) If i click UNDER OBSERVATION button it will be disable and other two buttons SUBMIT and REJECT will be enable
View 1 Replies
View Related
May 8, 2013
I am using access 2010 and I created couple of buttons on my forms that do some stuff in vba, but beside triger them with mouse I would also like my users to be able to have shortcuts on keyboard so for example I have btnClose an I widh when user press ALT + that btnClose do the same thing as it is doing when you press mouse on it.
View 4 Replies
View Related
Feb 17, 2014
I have a macro that Runs from a button that I attached to a form called " plans" the macro opens up a Dialog form from which I select a drawing number from, on selection of that drawing number a query is run and finds the information I want
The problem I am having is when I close the query the macro button goes active so if I want to run another query using the button it goes to the last record I selected. I have tried the refresh command but that does not work..I really need the button not to be active when the query is closed.
View 3 Replies
View Related
Jan 15, 2014
I am trying to open MX Excel using a command button. I have tried using a hyperlink and various codes that i have found online with no luck. The Excel file is being used by Access as it bring data from the spreadsheet and displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button (To open the excel file) i am met with errors and the file will not open.
View 1 Replies
View Related
Feb 1, 2014
I am working on a database and i have notice after making a form that when i enter a record using a form if i enter incomplete data on the form access automatically save that record and generate a id for that record.
For example I have a table that contain
StudentID,StdName,FatherName,DOB,Adress,Phone
And I have created a form for that table that also containing these fields.
Here I want to do that on the form I want a "Save" button , and the purpose of this button that when I click on this button then MS Access Save the record and then generate the ID for that record and if i close my form without pressing "SAVE" button access do not save that incomplete record.
View 10 Replies
View Related
Oct 6, 2004
Hi All,
I have a form called "frmProducts" which is linking to table "tblproducts".
Easy Enough...
The form shows all the Products information (fields).
I have a "More Info" command button (cmdMoreInfo) next to every record in the form.
When the command button is clicked I would like it to open up another form "frmMoreInfo".
But On frmMoreInfo I would only like it to show that specific product.
I have tried the following code on the on click event on the command button but it was always asking me for the value of Form![frmMoreInfo]![txtInternalCode]
Code:Private Sub Command12_Click()On Error GoTo Err_Command12_ClickDim stDocName As StringDim stLinkCriteria As StringstDocName = "frmMoreInfo" stLinkCriteria = "Form![frmMoreInfo]![txtInternalCode]=" & Me![txtInternalCode]DoCmd.OpenForm stDocName, , , stLinkCriteriaExit_Command12_Click:Exit SubErr_Command12_Click:MsgBox Err.DescriptionResume Exit_Command12_Click End Sub
Any Ideas?
View 4 Replies
View Related
Dec 21, 2004
I would like to develop a command button that archives the current record displayed in the form - my intent is to move that record from one table to another - a sort of automatic cut and paste from one table to another...can anyone help???
View 4 Replies
View Related
Jan 15, 2014
I have created Command buttons on forms with VBA code. Records GoTo previous and GoTo Next Record so both of working is good. But Next Record command is force to a new record. If suppose when we clicking on last record. It is go to new record without any message. So No need to force a new record with Next Record Command. Only just move to next record if there is no records show a message. Below mentioned both VBA codes so there is any changes on GoTo Next Record Code?
VBA Code:
Go To Previous Record : DoCmd.GoToRecord , , acPrevious
Go To Next Record : DoCmd.GoToRecord , , acNext
View 4 Replies
View Related
Nov 5, 2013
I am designing a database to manage hospital patient data. I will have to enter info at various points, e.g. when a patient is referred, admitted, discharged...
So for example, I have a main form with the patient's name and two subforms, one with the referral details (e.g. date, name of referrer...), and one with the admission details (e.g. date, diagnosis). They are linked through Parent-child links to the main form by PatientID. So, when I enter a new PatientID in the main form, the ID in the subforms is automatically added/synchronized.
However, I would like it not to be...since not all patients that are referred are then admitted. Therefore I would like to have a command button in the main Form that allows me to control when a new patient record is added to the admission subform. In other words, I would like an "Add a new Record in the admissions subform" button, which then creates a new record, with matching PatientID in the admissions subform (and in the related table). Is this possible???
I have tried using the command button wizard but it either requires a record to be already present in the subform, or it takes me to the first record of the form, and not the matching PatientID one.
View 7 Replies
View Related
Mar 13, 2012
Is there a way to create a new record by clicking a command button but to show the same text boxes shown in the attachment in the next record.
View 1 Replies
View Related
