General :: Wizard Not Working When Adding Filter Buttons

Jun 19, 2012

I seem to be having a problem with access 2007

When I use the filter by form, filter by selection, and toggle filter buttons located on the ribbon, they work normally on my form, in the usual way.

However when I use the button wizard to add the various available filter buttons to my form, it adds the buttons with the correct graphics on - but in form view clicking on the buttons does not actually do anything.

I've tried running compact and repair but still the same.

View Replies


ADVERTISEMENT

General :: Adding Registry Key With Packaging Wizard

Nov 15, 2012

When using the runtime version, there is an issue with trusted locations. The only way around this, it seems is to edit (add) the registry key,My research tells me the key to be added is:

[HKEY_CURRENT_USERSoftwareMicrosoftOffice14.0A ccessSecurityTrusted Locations]
[HKEY_CURRENT_USERSoftwareMicrosoftOffice14.0A ccessSecurityTrusted LocationsLocation(n)]
"Path"="C:PathToDB"
"AllowSubfolders"=dword:00000001(1)
"Description"="The description"
"Date"="01.01.2007 12:00"

If I use the Packing Wizard with Access 2007 to prepare an installation disk, there is the option for Additional Registry Keys, which looks promising, however, I am unsure how to proceed. You are asked: Root, Key, Name and Value. There are 4 options for Root: Default root, Current user, All users, Classes root.

View 1 Replies View Related

General :: Add Existing Fields And Property Sheet - Buttons Not Working

Sep 1, 2014

I have a problem with two buttons, add existing fields and property sheet

When i click them they do nothing at all, so i cannot do what i need to do?

View 9 Replies View Related

Form Wizard Not Working!

Apr 11, 2006

I am having a problem when trying to use the Form Wizard.

I select a table or query, but it shows no fields! Here is a screenshot:

http://img.photobucket.com/albums/v85/retroap/access.jpg

I am running Office 2003 with the latest updates on XP Professional SP2, again with the latest updates. The install was fresh only about a week ago, and I had only used this install of Access for a few hours before it started doing it!

I have tried creating a totally new database, or using an existing database, and the same happens. This led me to believe it was my Office install. I tried doing a repair through add/remove programs, which successfully repaired Office apparently, yet the problem persists. I even totally removed Office, rebooted, and reinstalled, and tried without updates!

Can anyone suggest what I could try next?

View 5 Replies View Related

Lookup Wizard Not Working

Nov 3, 2005

I tried to chosee Lookup Wizard as data type in my table so I can have drop-down options from another table. However, I received an error message, "ActiveX component can't create object". What does this mean, please help :confused:

View 1 Replies View Related

Command Buttons Not Working

Oct 19, 2005

I have a form that contains a subform.

The subform is bound to a table.

The form is based on a query but still writes directly to the appropriate table.

In the header of the form I have a series of command buttons - new record, navigation buttons, and buttons to open new forms. None of them work at all.

I checked each button to be sure the On Click Events still had the right Event procedure, and they do.

for example, the command button to open the Cases form has the following VBA (generated form the button wizard.):

Private Sub cmdOpenCases_Click()
On Error GoTo Err_cmdOpenCases_Click

Dim stDocName As String
Dim stLinkCriteria As String

stDocName = "frmCases"
DoCmd.OpenForm stDocName, , , stLinkCriteria

Exit_cmdOpenCases_Click:
Exit Sub

Err_cmdOpenCases_Click:
MsgBox Err.Description
Resume Exit_cmdOpenCases_Click

End Sub


When clicked, the button just blinks - nothing happens. I check to be sure the form isn't a popup and also closed it after clicking it to see if maybe frmCases had opened behind the current form for some reason. Nothing - it's not opening at all.

Any ideas?

View 1 Replies View Related

Forms :: Buttons Not Working?

Sep 4, 2013

I recently upgraded to Access 2007 from 2003. The upgrade was in June and went smoothly. I added a couple of drop down boxes to my form in August and that seemed to have gone fine as well. Suddenly, at least two weeks later, my form buttons are not working. I added the pathway to my database to the list of trusted locations. Everything I have read says this should work. This did not make a difference. I am able to edit forms, run queries and reports, and can add new records by entering data directly into tables but am not able to add new records, view details, close forms, or exit using my buttons/forms.

View 7 Replies View Related

Multiple Toggle Buttons Working Together

Jul 23, 2007

Hi - I have another problem. I hope you can help me out on this one.

Right now, I have 3 toggle buttons to control the visibility of 3 subforms. However, I only want a single subform to show at any given time. So, if I were to select toggle 1 it should give me subform 1, and afterwards if I select toggle 2 it should give me subform 2 WITHOUT showing me toggle 1.

Is there anyway to get the toggle buttons to work with each other?

Thanks,
:)

View 14 Replies View Related

Modules & VBA :: Yes / No Buttons Not Working On Msgbox

Oct 30, 2013

I have a form I use to search for clients when I hit a command button, using surname etc. I'd like a yes no button to pop up rather than the clunky ok button route I currently have. I'm a beginner with VBA and most this I've gleaned from internet.

If there are matching results, everything is fine. If there are no matching results, I've managed to get my desired messagebox come up by using the code below in the onload event of the resulting search results form, however the yes no buttons do nothing and the results form loads blank as though no records were found.

I'd like Yes to send users to the client input form, and No to return them to the search form.

Private Sub Form_Open(Cancel As Integer)
If Me.Recordset.RecordCount = 0 Then
MsgBox "Do you want to add a new Client?", vbQuestion + vbYesNo, "No clients found"
Select Case intanswer
Case vbYes

[Code] .....

View 9 Replies View Related

Modules & VBA :: Filter Records - Adding Unbound Date Listbox To Filter String

Feb 10, 2014

I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.

I'm trying to use Allen Browne's Search Criteria:

with another snippete of code I found here:

Code:
'Purpose: This module illustrates how to create a search form, _
where the user can enter as many or few criteria as they wish, _
and results are shown one per line.

[Code]....

It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.

Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.

View 2 Replies View Related

Filter Buttons

Aug 5, 2005

Please help!!
I have a form with a "filter by form" button generated by a macro and it works fine. Now I need a button so that the user will not have to use the funnel button in the toolbar to apply the filter. When I tried to place an apply filter button in the form, both buttons become greyed out and the only way is to click the funnel in the toolbar. Any help!!

Tony

View 1 Replies View Related

Filter Form With Option Buttons

Oct 4, 2005

Hi All,

Just wondered if anyone can help me with this.

I have a form based on a query that has 16 options for values in one of the fields. I wanted to put an option button for each value on a form that would allow the user to view the records based on which option buttons were selected and have the form update accordingly.

The way I've gone about it is to have some code in the after_update event thingimy of each option button that updates a boolean value in a table that's linked to the underlying query the form is based on - but this just seems a long way to go about this... plus it's not working...

I've searched the archives for clues on this but haven't come up with anything. So I just wondered, is there a better way than what I'm doing. I'm not after somebody to do this for me, just point me in the right direction.

Many thanks,

Peter

View 3 Replies View Related

Forms :: Filter And Sort Using Custom Buttons

Sep 24, 2013

I am using Microsoft Access 2010. It provides great filtering and sorting options in the ribbon for any object. But what if I hide the ribbon and want to create custom buttons on the form to do the filtering and sorting job? There are some filter options available in macros but are not quite like the ribbon's own Filter button. When the Filter button is clicked from the Robbin, a filter menu pops-up under the active field, which doesn't happen when I try to do it using Macro functions like "Apply Filter" or "Set Filter" etc. I want to have that big "FILTER" button from the Ribbon on my form.

View 2 Replies View Related

Reports :: Filter Between 4 Conditions - Setup Buttons

Dec 12, 2013

I recently took over a DB that is based on switchboard form upon opening. Haven't done anythng with switchboards, my question is.

On my report that I have open up I would like to filter between 4 conditions. Would it be best to setup buttons in the report after it is run, or have something in the swithboard code that will filter before it gets to the report? I have looked at the code for the switchboard and it looks "greek" to me.

View 2 Replies View Related

Adding Code To My Navigation Command Buttons

Dec 19, 2005

I have a students database with fields like

Id
Name
Address
City
State

I have a mainform with just two fields (Name and State)
and then a subform, I want to be able to enter students name or state on a field in my mainform and click on FindStudent, and it displays the record on my subform.

I also want to have a AddNew record button on my main form, and when it's clicked, i will be able to enter data into the underlying table using my subform.

How do i achieve this?
Any input will be greatly appreciated. Thanks :) :)

View 2 Replies View Related

Forms :: Buttons In Navigation Form To Filter Report Data

Sep 23, 2014

I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.

For example:
ClientID: 1 = Client: ABC Corp

In my report ClientID 1's data is grouped along with all other client ID's.

In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...

View 3 Replies View Related

General :: How To Share DB Using Security Wizard

Oct 10, 2014

I created *.mdb database and I used (user-level security wizard) to give each user a username and a password. The dB file is saved in D: drive. The security wizard created a shortcut on the desktop to open the dB through it. After using that wizard I cannot open the database directly from drive D:.If I try to open it , it says"You don't have necessary permissions to use the database".Now, there are many users should use this db through the network.

View 1 Replies View Related

Round Buttons Or Oval Buttons Instead Of The Normal Square Buttons

May 30, 2005

Hello everybody,

I’m new here and I have a question for you..

Is it possible to place round buttons or oval buttons on your forms instead of the normal square ones?

Greets,

Tom

View 2 Replies View Related

General :: Look Up Wizard Displays Numerical Value Instead Of Text

Mar 19, 2015

I am having some problem regarding the way the options in a lookup field is displayed. Currently the options are displayed numerically instead of displaying the actual text.

I have three tables which are ContactPersonnelT, OrganizationT and TrainingDonorT.

One of the fields in the ContactPersonnelT table is, Affiliation. This field is a lookup value (look up wizard) which comes from the OrganizationT table field, OrganizationName.

In the TrainingDonorT table I have a field called, ContactPersonnel. This field is a lookup value which comes from the ContactPersonnelT table field, ContactPersonName. In the drop down list of the ContactPersonnel, besides the ContactPersonName. I also want to display the Affiliation field. However, instead of displaying the text in the OrganizationName field, a numerical value is showing.

How to change the display to text instead of the numerical value.

View 5 Replies View Related

Filter By Form Not Working Properly

Feb 13, 2007

Hi,

I'm working in Access 97 and I've got a form that I want to use to create filters with.

There are a couple of things that I'm not clear about and I'd appreciate any suggestions that you can make:

1. The form seems to remember the last filter, so when I click on the Filter by form button it shows the last filter by default. I've included the following in the click event:
RunCommand (acCmdRemoveFilterSort)
Me.FilterOn = False
RunCommand (acCmdFilterByForm)
Surely either of the first two statements should remove the filter, shouldn't they? and if not then what are they for?

2. I can't get the 'OR' tabs to show at the bottom of the filter by form screen unless I apply the filter once and then click on the filter by form button again. Is there any way of forcing these tabs to appear?

Thanks for any help/advice you can offer.

Regards,
Bernard D

View 2 Replies View Related

Simple Query Not Working (Filter)

Oct 18, 2007

I have a query that filters two tables. 1) Status 2) Name

The status is 1,2,3,4,5 from an option group on my form.

In the query I have <>3 for the status, whereby I only want records that are status 1,2,3,& 5.

When I run the query with all names it works perfectly, however I am trying to run the query for only a select few names versus all of them.

The problem is I do not know how to select only a few names versus all of the names and make it work. When I try to add names i.e "Doe, John" my Status pulls all records including option 3.

Can anyone help? I do not even know where to start seaching.

Thanks.

Fen How

View 1 Replies View Related

Form Filter Not Working In Subform

Aug 8, 2005

platform : access (adp) / sql server
Problem : form filter not executing in subforms

When I goto one of my subforms I can activate the form filter.
When executing the form filter no records show up, it just keeps showing my criteria. When disactivating the form filter I receive an error message telling that my view must be misspelled (it's about spaces). My view is called Vw_people , as a record source it works fine so it can't be misspelled.

Is the problem the adp connection or the subform? I don't know

View 1 Replies View Related

Filter Report By Form Not Working

Nov 4, 2006

I have a report "Work Order Details" that that is based on a query and opens along with a form that is used to set filters. Based on samples I have looked at and reading, I cannot figure out what is missing. When I select my item form one of 5 unbound combo box 's and click the "Set filter" button, it brings up a paramter box?? If I cancel out the box, I still don't get a result. Just for the heck of it, I filled in a name in the paramter box, still no luck. The report property has "Filter On" as YES. The close button, clear button, and drops downs operate perfectly.

Here is the On Click Event info from my "set filter" button:

Private Sub Command28_Click()

Dim strSQL As String, intCounter As Integer
'Build SQL String
For intCounter = 1 To 5
If Me("Filter" & intCounter) <> "" Then
strSQL = strSQL & "[" & Me("Filter" & intCounter).Tag & "] " & " = " & Chr(34) & Me("Filter" & intCounter) & Chr(34) & " And "
End If
Next

If strSQL <> "" Then
'Strip Last " And "
strSQL = left(strSQL, (Len(strSQL) - 5))
'Set the Filter property
Reports![Work Order Details].Filter = strSQL
Reports![Work Order Details].FilterOn = True
End If

End Sub

View 2 Replies View Related

General :: Lookup Wizard - Two Fields In Drop Down List?

Oct 14, 2014

I've managed to use the lookup wizard to show me two fields in the drop down list, first name and last name, but when i select a record I can only see the first name in the cell, not both.

Is there a way to display them both together?

View 1 Replies View Related

Modules & VBA :: Filter Not Working In Navigation Form

Jul 20, 2014

I inherited this quote and trying to enhance it but having problem.

The filter in navigation form is not working but it is on its own form, the filter is working without problem.

View 5 Replies View Related

Queries :: Filter Not Working In Crosstab Query?

Apr 17, 2014

I have a table like this

Cultureworkload
ReasonfortestingIRLNumberDiagnostic sputum specimens processedFollow up specimens processedReception
Follow up7/20130102-Jan-13
Diagnosis8/20131002-Jan-13
Follow up9/20131002-Jan-13
Diagnosis10/20131002-feb-13
Follow up11/20131003-feb-13
Diagnosis14/20131003-Mar-13
Diagnosis15/20131003-Apr-13

I built a query with the wizard to group by Reason for testing

The SQl was

TRANSFORM Count(Cultureworkload.IRLNumber) AS CountOfIRLNumber
SELECT Cultureworkload.Reasonfortesting, Count(Cultureworkload.IRLNumber) AS [Total Of IRLNumber]
FROM Cultureworkload
GROUP BY Cultureworkload.Reasonfortesting
PIVOT Format([Reception],"mmm") In ("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug"," Sep","Oct","Nov","Dec");

Although I filtered reception field by month to 1st quarter it shows empty months like Apr,May Jun etc.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved