General :: Button To Print A Report Based On Text Box Values On Form
Jul 11, 2015
Im using a button to print a report based on a text box values on the form.the code for which is below
Code:
Private Sub SaveBtn_Click()
DoCmd.SetWarnings False
DoCmd.RunSQL "Update BookInTable SET DateBookedOut = '" & Me!DateTxt & "' WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.RunSQL "Update BookInTable SET BookedOut = True WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.OpenReport "Labels", acViewNormal
DoCmd.PrintOut , , , , 1
DoCmd.Close acReport, "Labels", acSaveNo
DoCmd.SetWarnings True
End Sub
The problem that I am getting is not only is the label printing but so is the form.
View Replies
ADVERTISEMENT
Nov 7, 2005
I am trying to create a report based on a table field called "ClassNo".
I would like there to be a pop up that asks for the begining and ending "ClassNo".
View 2 Replies
View Related
Nov 1, 2011
I am trying to print 5 copies of the report via the button on the form.
I'm sure I have the code correct, however I only prints 1 copy instead of 5.
View 1 Replies
View Related
Nov 17, 2006
Hi,
I have the following code which i found on another thread on this forum (thanks to original author) which is attached to the On Click of a button which prints the report corresponding to the details displayed in the form.
Dim strCriterion As String
Dim strMsg As String, strTitle As String
Dim intStyle As Integer
If IsNull(Me![ReferenceNumber]) Then
strMsg = "You cannot print a Blank Form!!."
strTitle = "Print Error"
intStyle = vbOKOnly
MsgBox strMsg, intStyle, strTitle
Exit Sub
End If
If Me.Dirty Then
Me.Dirty = False
End If
strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber]
DoCmd.OpenReport "DoC Certificate", acViewNormal, , strCriterion
This works fine, however, i need to be able to select the report based on more than 1 criteria. For example, the Reference Number can be repeated but is distinguishable from each other by an Issue Number i.e. ReferenceNumber = 93, Issue 1 or 2 etc. At present when i run the above it prints all versions of, in this case, reference number 93, which given that each report is only a single page isn't a show-stopper but it would be nice to have it working as i would like.
I have tried adding to the strCriterion line such as strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber] and "[IssueNumber]=" & Me![IssueNumber] but no joy. I have tried bracketing the whole line and variations thereof, again no joy.
Can anybody tell if what i am attempting to do is possible and if so how do i go about it?
I have tried the above coding using MasterID which is the Autonumber PK but it produces an "Enter Parameter Value" box for MasterID. Obvioulsy if i can get it to work for the Autonumber then my problem goes away but i can't seem to figure out why it works for Reference Number (Number) and not MasterId (Autonumber)?
Regards
Alan
View 5 Replies
View Related
Feb 10, 2014
I have a project which produces a report of names, addresses, etc. I added a print button to the form to send the report to the printer. The code is as follows:
Private Sub Command32_Click()
Docmd.SetWarnings False
'Docmd.OpenReport "rptAddresses", acViewNormal
Docmd.RunCommand acCmdPrint
Docmd.SetWarnings True
End Sub
Both alternatives in the code produce the same result described following.However, the printed report includes only the first 2 colums of about 10 of the 90 plus records. If I send to to a PDF, it works fine. If I do a print view on the screen ir looks fine.
View 1 Replies
View Related
Jan 30, 2013
Using Access 2010.I purposely disabled the Access Objects when opening my database for added security. This works.
The problem I'm having is when I use the print button (access macro) on one of my forms, as soon as i click the button, the "all access objects" window opens on the left side navigation. This window shows all of my tables, forms, queires..etc.Is there a setting that will permanately stop this from opening?
View 1 Replies
View Related
Aug 7, 2013
I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.
The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?
View 1 Replies
View Related
Sep 11, 2013
I have a button on a FORM to print the current record with the following code:
DoCmd.RunCommand acCmdSelectRecord
DoCmd.PrintOut acSelection
But what I need is that before printing, open the preview to set the margins and page size ... or at least to pre-configure so that when you press the button, and comes preformatted.
View 2 Replies
View Related
Jan 25, 2014
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code:
Private Sub cmdPrintRecord_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
Code:
varAge = DateDiff("yyyy", varBirthDate, Now)
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
View 11 Replies
View Related
Jun 14, 2014
I created report "rpt" with a few subrpts. I would like to export this report to word by value in column M_AGENDA_KOD.
M_AGENDA_KOD column has about 370 rows, so i do not want to export each manually.
So I would like to have each M_AGENDA_KOD value as separated word file named by that M_AGENDA_KOD value.
Is that even possible?
View 14 Replies
View Related
Mar 7, 2008
Hello everyone,
How can i have a form with a "Print" button on it for print a report instead of going to file, print?
I will appreciate if a sample of such database can also be attached.
Stay well.
View 6 Replies
View Related
Jun 23, 2015
I am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies
View Related
Aug 9, 2013
A command button on a form that can:
1- Open the Report called : ConsentForm
2- Print it to PDF printer (report is currently defaulted to that printer driver)
3- Save to folder: C:SOSConsentForms
4- Save as: Consent_[Last]_[First] (these are field names on the form)
Result i.e.: C:SOSConsentFormsConsent_Doe_John
5- Then send the file by email (Outlook) to : abc@hotmail.com
View 14 Replies
View Related
Jan 30, 2014
I have a form that records data entered by a user who I then want to email the record via a report run from a query.
I created a command button on the form with DoCmd.SendObject acSendReport,"name_of_report", "format", "to","subject", False
The email program (Lotus Notes) opens a new email msg with the report attached as pdf. However, the data recorded does not appear.
View 5 Replies
View Related
Jun 23, 2006
I want to print text based upon the content of the field but need more than the IIF statement. For example, if the field contains an "A" I want to print "Active", "C" I want to print "Closed", "N" I want to print "New", etc.
Thanks in advance for any help. You guys have always had an answer in the past!
View 1 Replies
View Related
Dec 3, 2014
I have a database with several reports that get constantly printed, however I am having an issue with their display properties that sometimes cause errors.I need the report to come up on top of everything, maximized and with the menu bar available to allow for it to be printed or close it. The report window cannot have "minimize" or "restore" available to make sure nobody access any form behind it.
To achieve this in a form I generally use the modal property, however if I do this in a report I cannot get to the menu bar to print or close the print preview.Thinking that modal was out of the question, I went ahead and maximized the report on load and set its properties to the image attached. The db is then compiled (accde) and then distributed.
On my computer (it is being developed on my machine) the report loads fine (maximized) with no min, max or restore buttons and the print preview menu bar is shown with the print and close buttons available. See "My PC" image attached.On any other computer, the report opens up maximized but the report's restore and close buttons are enabled, however the print and close buttons on the print preview menu bar are greyed out. See "Other PC" image attached.Why the inconsistent behaviour when using the same front end?
View 5 Replies
View Related
Jun 13, 2013
I added a "print preview" button to a report that does just that, shows the print preview. The issue I'm having is that I can't do anything in Access after I click that button. Everything in Access seems to stop working, I can't click on anything with my mouse. the only thing that does anything is that i can move the report up and down with the up/down/left/right keys. If I click on a different application that isn't Access (i.e. excel, spotify, email, etc.) and then go back to it, everything works fine.
View 4 Replies
View Related
Oct 19, 2015
I'm having difficulties with building a printing option for specific goods selected on the list.
I have a form which contains a subform. On the main form user is able to select supplier and based on the supplier can choose article that he's interested in. On the subform user gets the list of all the goods that are connected with that specific article.
I want be able now to select specific goods from subform list (using checkbox value) and based on the selection print a separate label for each goods.
View 4 Replies
View Related
Apr 18, 2006
Hi
I need to print a specific form based on the selection made on a combo box.
I have been able to set it up to open the relevant form when the user selects an option from the combo box, but am unable to find a way to be able to print the specific report based on the selection.
I have a command button which prints a report based on the data in my current form, but would like it to also print the specific form based on the combo box selection.
Is this possible, and if so how is it possible?
Thanks in advance,
me
View 5 Replies
View Related
Sep 6, 2014
I need VBA code to print a report (rptLoadSheet) when the autonumber field (Auth Num) ends with a zero.
For example:
The autonumber is 99...no report.
The autonumber is 100...print the Load Sheet report.
View 3 Replies
View Related
Jul 2, 2015
I have to print a label quickly every time that the product hit the warehouse. The label has been created as a report linked to the query that will provide the info to the report. In order to make this report printing as quick as possible the idea is to scan the sample id from the product and once the label is printed scan the next sample and an on.
I'm not an expert on VBA but I have created the following scrip but the reports doesn't pop up.
Here is the code:
Dim SampleID As String
SampleID = InputBox("Enter Sample ID")
If SampleID > 0 Then
DoCmd.OpenReport "rptGRM_QuickPrintLabelDymo", acViewPreview, , "[Sample]=" & SampleID
Else
DoCmd.Close
End If
End Sub
View 8 Replies
View Related
Jul 14, 2015
I'm currently working on a project within access which will allow users to select/input information in a form which will then save to the database.
What I need is to create a button on the form which will allow you to convert the data collected from the form to a custom text file template.
(Or maybe the last row added to the database. - although this may cause errors. Example: the form information doesn't save which will in turn create a text file with the data collected from the previous job)
The custom text file template should have a sentence description followed by the value recorded from the form.
Example:
1 configuration type: (data from form)
2 model type: (data from form)
3 Poc: (data from form)
And so on.
So in summary - I would be to use the form to collect the desired information which will save to the database.
Once actioned, a custom text file should be populated with the collected information (with specific data placement as per the example above)....
View 1 Replies
View Related
May 25, 2013
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
View 3 Replies
View Related
Sep 5, 2012
I wish to produce a delivery note which needs to print an empty box for manually ticking.
I need a box for each item quantity i.e 5 items on the job print 5 boxes. 20 items print 20 boxes.
I have been able to use very crude code if there is only a few items, using if qty =1 then / 1/ else if qty = 2 then / 1/ / 2 / etc etc ...
That works and prints the / 1 / 2 / which is ok but there must be a simpler way as it the job has more that it would be much better and far more useful for other reports to print a box or item.
View 7 Replies
View Related
Jun 5, 2014
i have created a MultiSearch query witch puts my results in a list box.under it i have created a button wich i want to use to print a report with the criteria i select from my list box if there is more than one result.
Following is the Code i used for my button
On Error GoTo Err_Command60_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "ReportLable"
stLinkCriteria = "[ProductID]=" & Me![SearchResults]
DoCmd.OpenReport stDocName, , , stLinkCriteria
Exit_Command60_Click:
Exit Sub
Err_Command60_Click:
MsgBox Err.Description
Resume Exit_Command60_Click
Every time u press the button i get a message syntax error(missing Operator) in query expression
Now i have not used any code in my Query except for
Like "*" & [forms]![frmSearchFor]![SrchText] & "*"
Where i made the error
View 3 Replies
View Related
Jan 26, 2015
I have a form created from a table that contains item information.
I have a sub form linked to a different table that contains records.
Each item has multiple records associated with it, so for example 1 record on the main form could have 10 records displayed in the sub form.
Example: Main Form :
Item | Units | Serial Number
Thermometer1 | DegC | 123456
Sub Form:
Item | Date | Actual Measurement | Unit Reading
Thermometer1 | 01/01/15 | 25 DegC | 24 DegC
Thermometer1 | 01/01/14 | 25 DegC | 23 DegC
Thermometer1 | 01/01/13 | 25 DegC | 24 DegC
Thermometer1 | 01/01/12 | 25 DegC | 26 DegC
Thermometer1 | 01/01/11 | 25 DegC | 25 DegC
I want to be able to print preview a report based on 1 record record selected in the subform. So using the example above i'd like to print the record on say 01/01/13 as a report that contains all the information from the item table and only the information on the 01/01/13 from the record table.
View 5 Replies
View Related
