General :: Database Which Serves As Platform To Launch 10 Databases
Apr 29, 2015
I have 10 small databases. At present, I have another database which serves as a platform to launch the 10 databases. I have a graphic for each database and posted an Event Procedure for each graphic to launch the respective database. For example ...
Dim accapp As Access.Application
Set accapp = New Access.Application
accapp.OpenCurrentDatabase ("M:MPFMPF_Mgmt_Info_SystemSignInPlusSignInPlu s.accdb")
accapp.Visible = True
Is this the best way to centrally locate and launch multiple databases or is there are smarter way?
I have a 2007 back-end db on a network share and around 15 regular users who access it through their own front-end db/interface. One user on Windows 7 is able to launch and use his front-end copy fine except when he goes to launch one form for data entry.
This form clocks and freezes the entire application. I sat with him and was able to determine that the issue is that the form_load code is never running. He clicks on the button to launch the form (done in vba) and the code never runs. If he opens the form in design view first then changes to form view, the code runs fine and there are no issues. This is his present work-around, but I had to give him an unlocked FE copy to pull it off (not ideal!).
I tried this with him on different PCs, with different front-end copies, and even in the back-end copy. Same result each time. None of the other users have this issue, and he can replicate this issue on different PCs. I'm at a loss for what might be causing this since it really seems so user-specific.
I want code to synchronize 2 or more databases. The databases are the same, but in different media,like in mobile flash drive,backup drive and main system
I've been developing several databases. Some elements that were experimental are now going "live". My development environment is Access 2010 on Windows 7 Pro. The "live" environment is also Access 2010 but running on Windows Vista SP2.
In development, I can drag tables, queries, etc. from one database to another by dropping them in the navigation column. When I try that on the "live" environment, it doesn't seem to work.
Is this a knownh difference between Windows 7 and Vista? Is this some sort of "trusted database" issue?
It is lots easier to drag and drop than using the Import External Data process so I'd like it to work.
I have an access db as the backend with the tables. Then multiple front end access dbs that link to the tables (as external sources). The front end dbs are setup with different forms on a per user basis, depending on their role. From my user db I want to be able to request information from another user. I want something in their db to pop-up and request the information.
I was thinking about approaching it using the datamacros. I thought maybe each front end db could have a messages table that the main db and other front ends link to. Then whenever they add data to your specific table it would respond and ask the user for the information. The info would then populate back into the message table where it could be retrieved by the requester.
Example: User A opens A.accdb and has a table called A_tbl. User B opens B.accdb and has a link to A.accdb.A_tbl. User B adds a record to A.accdb.A_tbl with Field1 = "what is your name". User A receives a pop-up with the info from Field1 and responds in a textbox for Field2. User B can then look at A.accdb.A_tbl and see the response as Field2.
Another option I thought of was simply trying to get one db to run a form/macro on another db remotely.
Example: User A opens A.accdb and User B opens B.accdb. User A clicks a button on one of his forms and it opens B.accdb.FORM in the session of User B. User B fills out the form and submits. User A retrieves data from shared tables as normal.
Hi all, i hope this is posted in the right place first of all :) apologies if not..
I have about 8 individual databases which will be used simultaneously by users. I wish to be able to have full control over these databases from a 'master database' including being able to delete the data in there (possibly import fresh data but not 100% needed) and export data to be analysed in Excel etc I figure this can be done with access but if i'm on the totally wrong track i would be appreciative if someone could give me a push in the right direction..
If any more infomation is needed then let me know.
I would like to know in what type of working environment everyone works. i.e. an office with a closed door, a cubicle with high walls, shared cubicle, low-walled cubicle.
I have one Master database and multiple child databases in a folder. Each of these databases (both Parent and Child) have identical table called "source". I need a VBA code which will consolidate tables of child database into the Parent database table.
I have database for each location. Every location will update some information in the databases and send it back to me. In those location based databases, information will be stored in one table called "consolidate_input". I will store these databases in one specific directory and then I want to accommodate the data of "consolidate_input" into one master database having the same identical table in the database.
I am trying to form a join between two separate databases. Database 1 has a column (Gene_Name2) that consists of common names of human genes. In this database there is only one name for each gene per field. The other Database 2 has a column (Gene_Name2) that has various names for the same gene in each field. Most genes have been given different names over time. I want to join the databases into a separate query database so that all of the information in Database 1 is retained and only when the name in Database 1 matches one of the names in Database 2 does the row of information get tacked on to the query database. The problem is that in a normal query the text in both Gene_Name columns do not match and the query returns no matches. I have tried Instr and like criteria statements with no luck.
Any way to list all currently opened Access databases? It feels like this must be possible by referring to the databases collection, but I just don't know how.
Also, is it possible to refer to controls on a form in one open database from code in another database? (and obviously if so, how?)
I'm merging a few databases together. They're fairly simple on their own but I'd like them as one big database. I read that I should import each access database into a new, blank one.
It all works fine, but none of the saved imports and exports come with them. Unfortunately, these imports and exports are relied upon quite heavily.
Is there a way to bring saved imports over from other databases, or will I have to rebuild each one?
I want to be able to merge the two records together if the field chr matches between the two files plus if there is an overlap between the start number and end number from each file. For instance the first record from each file would match because the range from 1000 to 2000 of file 1 has numbers consisting of 500 numbers (1500-2000) that are also present and overlap in file 2 (1500-3000). I possibly cannot use < or > since the ranges from each file will vary to different degrees. Perhaps there is a between function that might work...
This works fine, however I noticed that if the path for the specific document contains a space, it does not open up successfully but i get a msgbox saying "the document name or path are not valid"
I am new to this board and have a question about your opinion on creating an Access project that will be a project launch calendar for an organization. Basically, there are numerous projects with start and end dates and they need to be tracked every month and Gantt chart type reports are created that how their current status and if they have slipped or not. It is done in Excel now, where are set of people gather information about different sets of projects and at month's end compiles them into one Excel sheet which is then used as the basis for generating some reports through Mail merge and also manual Gantt charts in power point.
So, the idea is to port this system to Access where data is continuosly fed by the users through the month and then at month's end reports generated that are similar to what is produced manually now. My basic questions are:
1) What do you suggest regarding the process of having multiple users interact with Access to feed in data throughout the month, i.e. can this be done concurrently or is there a best practices process of having multiple users interact with the system without disturbing each others work?
2) Is there a sample project or technique someone can suggest that enables production of Gantt chart type or MS Project type visual timeline reports from the underlying data?
Will appreciate any pointers. Apologize to folks for whom all this is very basic. Thank you
Hi How do you launch a text file using a button in VBA? I want to click on a button to open a log file - I would actually like to open a dialog box that starts up in a particular directory (eg C:logfile) - the user can then double click on any required txt file which then opens in notepad. Thanks
What is the simplest (script) way of opening a .mdb file from a simple VB appliaction that I have made i.e by clicking a command button that says "Click this button to open XXX.mdb"
I have fell into Data Access Pages (yes, it hurt :p ), and have absolutely no knowledge of HTML or Javascript (though fairly competent with vb), so please bear with me!
When you are using normal forms in Access, you can launch a separate form from a command button, and bring up a record based on a value in a combo box - for example, Form A has a combobox1, and when cmdbutton1 is pressed it launches Form B and displays the appropriate record, using the criteria of combobox1.
My question is, is there a way to duplicate this functionality when using DAP?
Hi all! I am looking for some help in how to get a form to open just once on the first launch of the database. This information is the company information of the one using the software. I have a button that one can click if they want to edit or add this information later. Thanks for your help in advance.
My goal is to have one form which will be used to launch any of my reports. I'd like to be able to group my reports (Customer Service, Accounting, etc.).
There used to be a great sample of this on the forum but I can't locate it...perhaps we lost it in the hack.
So my question is what is the best way to create a form that will allow the user to select from a list of all available reports?
I have a fairly simple report which lists rows from one table with a little bit of logic. At the end of each row, I want an action button, which when you click it, goes to a form with the correct ItemID for that row.I tried the VBA code like this on the View button on click method:
Of course, what happens is it opens the form CreateCAF with the first ItemID in the report, regardless of which row you click on. I want it to pick up the ItemId of that row.
Still working on an meeting registration app in Access. I have a Main menu which contains buttons that allow search by Name, Phone Number, or Account Number. We are using barcode scanners if they have a registration card.
Currently I have an account button which pops up a query prompt window and when they scan the code it fills the prompt with their account number and a carriage return, pulling up an account registration form with their info.
What I would like to do is from the main form, if a barcode is scanned, to automatically lauch the account form passing the scanned account number.
I would like to be able to have a button that my firm's legal assistants can click which will automatically popup the folder on the server where the client's documents are stored. What is the easiest way to write this?
I have been searching the web for a solution to this problem. I have created a scheduled task on Windows 7 to automatically run a macro from a command line, however, it seems to only run when the user is logged onto the machine. Is there a way to run Access without the interactive logon? I would rather not leave the machine logged in with this account, but if that is the only solution, so be it.
I have a small database where we enter audit log data. In my add add screen from the switchboard, one of the fields is the user the audit is assigned to. So that our group wouldn't be typing their names a bunch of different ways I created a reference table called "Ref Data 005 - Contact Name". So i pre-populate the Contact Names such that they will be more consistent.
The add works perfectly. I built all my screens using the forms wizards.
Now for the modify routine. If the user wants to go in an modify one of the other data elements, I force them in the wizard to do this modify by choosing thier name. Therefore, when i built this screen using the wizard I reference the "ref table" mentioned above. I then throw open another form displaying all of the fields based on the records that it finds for that user when they choose the name from the Ref data 005 table. Hope that makes sense. Ie.. they choose the records they want to possibly modify by first choosing their name from the ref table.
It correctly pulls the records for whatever user you choose. However, when you make the update and save, it is changing the Ref table name as well.
So for example if three users were in my ref as : bill joe john
And you launch the form, lets say joe shows up in the list, when i change it to bill to retrieve bill's records , it will do that but when i make the change, then Joe is changed to bill in the reference table.
