I have a listbox in which I am using both the single and double click events to return different data. It seems that when I try to double-click it is interpreted as a single click! It doesn't seem to "wait" for the second click. I have been coding for years but never saw this before.
View RepliesIn the Main Form , I have few buttons and I am writing the following code to open the right form when a button is clicked but unfortunately the code isn't doing anything. No form is opening. I am using MS office 2010.
Code:
Private Sub BtnOption_Click()
DoCmd.OpenForm "Form1", acNormal, , , acFormAdd, acDialog
End Sub
Private Sub Form_Load()
'Me!Label1.Caption = "Welcome " & Environ("username") & "!"
[code]....
Hi
I am importing a database, but I first need a couple of parameters from the user.
Now I write this mostly in Access VBA, since I come from programming background.
What I want to know is how can I let my code wait for the modal form to close before continueing?
Thanks
-Canderel
Sub ImportFoo()
'//Prepare files for import
docmd.OpenForm "frmImportParameters" '//(with modal, pop-up, etc.)
'//---- WAIT For form to close ---- THIS IS MY Question...
'//Import Code... This runs before I close (actually before the form opens about)
End Sub
Hey guys!
just wondering if there is an way to command
Call Shell("my_bakcup_string",1)
and wait 'till the bakcup program ends to go next command in VBA
thank you! :cool:
I'm using hte Shell() function but this doesn't wait for the executable file to finish so I'm looking for a command line function that would wait until the executable file is finished executing...
I saw this function WaitFor but it is not supported in MS-Access? So, what do I do?
Thanks...
Page loads, transaction is submitted, everything works fine 99% of the time, however, on occasion, the page loads a mini error page where you have to click a blue link for it to continue. Here is where I am stuck, if the blue link appears, I get an error that the object is not set, if I move my cursor up one row (For Each htmlInput) it will continue without error. How do I get IE to give the error message a chance to load before checking it out?
Code:
'click the SUBMIT button
For Each htmlInput In HTMLDoc.getElementsByTagName("Input")
If htmlInput.Value = "Submit" Then
[Code]....
I have a database that I have created for work. On the form I have several dlookups running. A couple of them show up as expected. But most of them are showing up blank. That is until you click on the box, then the result appears. Changing the Locked and Enabled settings does not resolve this.I have the database locked up for normal users. When I access it by holding shift while opening, when I access this form, the dlookups all show the desired results. No clicking on the boxes required.
I've tried refreshing, but that doesn't work. If I write code that loops through all of the textbox controls, setting focus on them and moving throuhg the form, then the results will show up. Basically having VBA click on the boxes for me. Although this works, there is a slight lag and screen flicker as it sets focus to all of these textboxes.
I have a DB: This DB was sent to me via eMail (dropbox). It consist in a BE and 3 FEs. In each of the FEs I have a started form with some code activated by the Open event.
The issue: Access do nothing when I open the FEs. Note please that the DB is designed by me and it work very well on the user"s computers.
I use A2007 on Win7
The DB is in a trusted folder. Compact and Repair is not useful.
I currently have a "send object" macro which runs when a button is clicked on a report, it makes the report a PDF file and automatically places in my office outlook also places a subject and message into the Email.
what I wonered is there is a limited amount I can put into the body of the email in the field so I wondered if it is possible to use a Email template that is placed into the body and then the attachment is also added? I have tried to use the template file but it doesnt seem to work.
Hi all.
I have a form that opens up another form when you click on a button. The button does more than just open the form, it does other checks. I want to wait until the opened form is closed to continue with the subroutine. Is this even possible in VBA? I was wondering if there was a frmFormName.IsOpen or some kind of flag that would tell me if a form is open or not. Any help would be greatly appreciated. Thanks in advance.
Sub open
Checks things
Checks things
checks things
Opens form(frmDetails)
Wait for form to close (THING I DON'T KNOW HOW TO DO IF POSSIBLE)
Checks things
Checks things
end sub
happen- scroll wheel stops working in one table- the rest you can scroll in as usual? I know there can be issues with scrolling when you're missing some driver for your mouse, but this happened all of a sudden to just this one table, so I can't imagine that it's the mouse missing any drivers. I did compact/repair, restarted, and also tried repair of office installation. That table still won't allow scrolling unless you move the scroll bar manually first.
View 3 Replies View RelatedI have table A with a list of Work Instruction references (WIREF) and a Issue number (ISSNO).I have Table B wth employees and they too have a Work Instruction (empWIREF) and Issue number (empISSNO).I want to check if the Work instruction Issue has changed since the employee was trained
check:
WIREF = empWIREF and ISSNO <> empISSNO for all records in table B
I'm trying to create a file, save it, create an email with a link to the file in it, and send the email. But the link in the email doesn't work if there are any underscores ("_") in the file name or file path.
The folder that I need to save the file in and link to in the email has underscores ("_") in its name. I cannot rename the folder.
The attached database, when you click on the button, will create an Excel spreadsheet with "RED", "BLUE", and "GREEN" on it, save the spreadsheet in the path you enter with the name 'Test_File' with date and time appended, create an email with a link in it to the spreadsheet, and send the email. You must enter your email or an email address that you can use for testing in the form and enter what you want for the file path. Enter the file path with a slash at the end. Do not enter a file name. Then click on the button and wait a minute or 2 for the email.
When you receive the email, click on the link. It does not work.
If you change 3 statements in the code for frmMain, it will work:
Code:
strNow = Replace(strNow, "/", "_") '<------ Change _ to - and it works
strNow = Replace(strNow, ":", "_") '<------ Change _ to - and it works
filename = "Test_File_" '<------ Change both _ 's to - and it works
Change as indicated.
So how can I get it to work with the underscores? I could actually do away with underscores in the file name but the folder that I need to hit has underscores in its name.
I created autoexec macrro. But when i open the form as a dialog box it doesn't show minimize and maximize button.. it only shows close button so what should i do..Also i want to create the log in form as well..So here is what i want
1) when i open the database it shows me log in box and if i put right password and username
- if i put wrong password it should keep promoting me until i put right login details and this login shouldn't be displaying the close button otherwise users can easily access through database.
2) the navigation form should be pop up.
I have tried using a timer event to not show a form until it is fully loaded, to no avail.
Code:
If CurrentProject.AllForms("FONNewEdit").IsLoaded = True Then
Me.Visible = True
Me.TimerInterval = 0
End If
I have tried using the onload, onopen but the form still displays before being fully loaded.
How do you enable to click multiple form that are set to pop up , modal and the border style is dialog ... ? the scenario is like this, my main form pops up and when i click a button that shows a different form , i won't be able to click back or do anything on my main form unless i close the new form that was loaded.
1. Main form is loaded
2. i clicked a button on my main form to load a new form
3. The new form is loaded, i can't click back or do anything on my main form unless this new form is closed.
my settins on my form are :
pop up - yes
modal - yes
border style - dialog
enable me to run some code before a button is clicked I want to be able to click a button via VBA code.Basically I used the auto button wizard to make an add record button.To ensure a shed loads of if checks and queries on the entered form data run I wanted to make this button invisible, then make a new button running code not embedded macros to run my checking module then click.
View 9 Replies View RelatedI'd like to create 'Exit Microsoft Access' Button.
In Command Button Wizard which action I should use to get it right? and finally in the properties should go to 'on click'?
I know how to use a callback to to action a button click directly.
But I also have a drop down list of my buttons on a form (they are dynamically created, so the details are stored in a table), I want to select a button from my drop down lists and then action the button selected.
EDIT: In short - I want to execute a ribbon button via vba knowing its Control.ID.
i want to ask is there any way to open another access database using when click button at form.. for example i have tracking.accb then at my switchboard form, i would like to have a button that can go to another access which is borrow.accb. can these possible for me to do it..?
View 3 Replies View RelatedHow can I run an Access 2003 file automatically, after double click the Access 2003 Icon?
View 2 Replies View RelatedI have a form with an image embedded in it. I want to be able to click on the image and leave a "dot" or "mark" where i have clicked, allowing me to click in multiple places on the image and leave multiple "dots"
I am assuming i need to crate a new shape each time i click, how is this done?
I currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?
View 2 Replies View RelatedIs it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
View 12 Replies View RelatedI have two forms. One is a datasheet. One is a form with a default view of Single Form (which contains combo boxes).I want to have the user select (click) on a record in the datasheet and have the second form open to that record. The datasheet form acts as an advanced search on two title fields.I tried the open form macro but I dont know how to have to second form open to a specific record.
View 9 Replies View Related