I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
View RepliesI currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?
View 2 Replies View RelatedI all I have looked in the forum but can't find anything that matches I have a form containing a subform called eventswich shows some events in date order, as I have too many information on the table events I could not put them all in the subform if not only the essential information, what I need is if I double click on the field "DATE" it would open the "EVENT" form and show me all the information contained in the record.At the present time I have the filed SELECT RECORD set to NO on the form properties!
Hope I have given a good explanation!!!!
Thanks
Marco
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).
I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.
I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.
For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.
Thanks.
I have a subform 2SiteList (Datasheet View) with the field SiteName... i also have another form SiteDetails.
if possible i would like to be able to double click on a SiteName on the subform and have the SiteDetails form to open to show the full details.
I have a list of incidents in my Incidents Management Database. It comes up as a grid view when users open the database.
This is what it looks loke (paste the following into address bar of your browser. lh5.google.com.au/snehal.dabhi/R8oc22J_RfI/AAAAAAAABz0/bbIkCzg5whk/image001.png
I want particular incident to open in a form when users double click on any particular incident from the list above.
For example double clicking on the first incident (dated 1/03/2008 in the list above) should open the form below with THAT PERTICULAR incident. And double clicking on 22nd incident should open the following form with 22nd incident loaded, so users can edit that incident
please Paste the following into your browser to see the image.
lh6.google.com.au/snehal.dabhi/R8oc3GJ_RgI/AAAAAAAABz8/vGSjfr5rZ10/image003.png?imgmax=640
Any detailed help is much appreciated. – I am too new to understand macros and vba.
Thanks!
I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".
This may be a really simple problem but it has me stumped. Working in Access 2002, I have a form with a subform (continuous). When the user clicks on a textbox in the subform, I need to capture the value and pass it to the main form so that it can be used to create a filter for yet another subform (not nested) on the main form. How could I accomplish this? Thank you in advance!
View 3 Replies View RelatedMorning, all...
Hoping someone can help me with this. I have a form (one-side) with a bound continuous subform (many-side). I have a second unbound subform, also continuous, which is used as a reference only (no data entry) to select the record to be added to the bound subform. Is it possible to set it up so that, when the user double clicks on the pk from the unbound subform it adds that pk as a new record on the bound subform?
Thanx in advance for your help with this ;<)
Karen
I want to Double-Click on a row of a subform to open a related table/form that are connected with a common ID. So far, I tried the following code, but it does not work.
Private Sub PackingSlipT_subform_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "ProductT"
stLinkCriteria = "[PackingSlip_ID]=" & Me.PackingSlipT_subform.Column(1)
DoCmd.OpenForm stDocName, , , stLinkCriteria
End Sub
greetings all..i have tried to use an old database template i had and re-work it for my new client..basically the user types a ref no into a search box.. there is a text list that is narrowed down to the chosen item as they user types..then they double click on the item in the list and it opens in the main form..this is how it should work.. i think im pretty close but im gettin a few problems.. i would be very grateful if someone could have a look at it...the form i want all this to happen on is called MAINFORM.. the database is very simple.. one table.. one query.. thats it..thanks..
View 2 Replies View Relatedi will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery
Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If
End Sub
I am trying to double click on a subform field called Address which would open a form frmEditWorkItem (based on a query qryWorkItem) then to be able to carry out edits for the current record.
This is my code line:
DoCmd.OpenForm "frmEditWorkItem", acFormAdd, acDialog, "ADDRESS = '" & Me.ADDRESS & "'"
This line does open the form but shows ALL records in the table instead of the current one that I have clicked in.
How can I run an Access 2003 file automatically, after double click the Access 2003 Icon?
View 2 Replies View RelatedIs it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I have a Contacts subform and would like to be able to double click to fill addresses, and details from the previous row...every person in our database even those living at the same address needs thier own record.. and since we only need to fill up to 5 records and review them, double clicking on the first name to fill up the next row with the previous addres phone number ect would be grand.
I am assuming we could fill out the new Full Name and double click on it to get the previous record filled to the new one. Don't really want to work with a query unless needed, but I have a little vba understanding.. how do I code this to make it work?
Full_Name_Dbl_Click
getPreviousRecord.Address(-1)
getPreviousRecord.Phone Number(-1)
getPreviousRecord.City(-1)
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer
CandID = Me.List4.Column(0)
DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I have a attached a sample database to show you my problem the form "stores1" is the navigation form . in side that I have 2 subforms.
the first form I have a macro in it that when you double click it ( say the first line ) the stocklist file will appear on the part that I double clicked on IE 5096B02066 this did work and does work in the old access I have but now I put these forms into the navigation form I cannot get it to work,
I am having this problem on many forms even if I try to put a text box into the navigation window that ref a field on one of the subforms.
Is it possible to once you have run a query be able to somehow double click on the results in order to either go to original record or see more details? Similar to "show details" in excel?
I have made some queries that are working well however they are specific in nature and once found display a list of results. I have left a field that uniquely identify them and are after a quick way to view the details of the results from the query rather than take the ID# and manually search the original table.
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
Hi,
I want a user to be able to create a new record in the main form, after they have finished filling in the boxes in a subform by pressing the Enter key, rather than having to click the 'new record' button on the main form.
I reckon I need a 'default button' on the subform but I have no idea what this should do when clicked to create the new record...
Hello,
I have tried everywhere for a solution to this:mad: Any help is much appreciated.
I have a main form with a subform. The subform shows related records using a match criteria. Each record that shows in the subform also has a unique ID. This unique ID is also shown on the main form record (although not used to link the main and sub forms).
I would like to be able to click on a command button on each of the records in the subform and goto the Main form record. I can't find any threads that deal with this though - sorry!
Hope it makes sense
DJ
I have a subform that is populated with records, filtered by two combo boxes on the main form. I would like to be able to double-click on one of the records in the subform and have it populated in the main form for editing.
Any help would be greatly appreciated.
Best regards,
MrAviator
Hello..
I have the following code that I have been trying to get to work:
Private Sub txtSocNumber_DblClick(Cancel As Integer)
On Error GoTo Err_txtSocNumber_DblClick
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "FrmApplicantFullDetails"
If IsNull(Me.txtSocNumber) Or Me.txtSocNumber = "" Then
MsgBox "This record is empty", vbInformation, "No Data"
Me.txtSocNumber.SetFocus
Else
stLinkCriteria = "[ApplicantID]=" & Me![InvestigatorID]
DoCmd.OpenForm stDocName, , , stLinkCriteria
End If
Exit_txtSocNumber_DblClick:
Exit Sub
Err_txtSocNumber_DblClick:
MsgBox Err.Description
Resume Exit_txtSocNumber_DblClick
End Sub
I have the following two tables:
Applicant and Investigator
Applicant:
ApplicantID
InvestigatorID
etc
Investigator:
InvestigatorID
etc
The relationship is setup as 1 investigator to many applicants.
What I am trying do is this. I have form with a subform in it. In the subform there is applicant info IE SS# LName, FName and that is it. What I want to do is be able to double click on the SS# have the form "FrmApplicantFullDetails" open so you can view the work up on the applicant or edit info on the applicant.
Am I going about this the right way with the above code? Or is there something else I am missing in the code or is there code out that will do what I am looking for that is easier?
Thanks
R~