General :: How To Get Single Table Entry View For % Allocation Of Items
Dec 28, 2014
How could I create a single table (matrix) type input view to allocate bank transactions to categories, noting one transaction can be allocated multiple categories with an associated percentage? What approach should I use in Access to get this? So say I have the following tables:
* Transactions
* Business Category
* Transaction-Business-Allocation (which includes)
- Transaction ID
- Business Category ID
- Percent Allocation
But in terms of the means of reviewing bank account items and allocating I really want a view like this (see attached image)The specific business category could be either selected specifically, or all included.
I have following Fields. Allocation ID(PK), HW ID, User ID, HW Status, Assigned Date.
Values of HW Status = Active, Inactive, Decom, In Stock etc.
What I want is explaind below example
HW XXX is allocated to User ABC and the Status is Active.
Now When I want to reallocate the same HW XXX to Another User XYZ then Make the current status as Active. But before doing that the form should force me to change the Status of previous allocated to user ABC to anything other than active. Because One Device can be active to only one user at a time.
i,e Combination of HW ID & HW Status(Active Only) should not be duplicated.
Is it possible to set up a view within an access app to show a number of different "grand totals", related to one or more tables. For example, I'd like to display the total value of all orders, the total number of orders and the total number of items ordered, on a single view. In this case, all the information comes from one table - Orders, which contains fields - Total Cost and Quantity. I've tried to create a Summary view, but that requires me to use the "Group By" function, which I don't want here, so I tried to do it with queries, but it seems to involve multiple queries, which then means multiple views.
I've got a table tblPatienten, a table tblRechnung and a form frmRechnung.
The primary key in tblPatienten is KundenNummer, the primary key in tblRechnung is RechnungsNummer. The relationship between tblPatienten and tblRechnung is one to many.
Now, every patient (stored in tblPatienten) is allowed to make multiple orders (stored in tblRechnung).
How can I assign each new order entry in frmRechnung to an existing patient in tblPatienten?
I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.
Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:
Box Number Serial Start Number Serial End Number
When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.
I'm working on creating a resource allocation table for my small company. Basically, we want to be able to designate a certain number of "man-months" per functional group per month per project. Additionally, this database will hold the billing milestones that are associated with the project and we will track some health indicators to each of them.
For instance, we may have a project that is going to be running from May 15th 2014 to June 5th 2015. Based on an access project template I found, I have created some pretty good quality forms/tables that are working well for project inputs and milestone tracking.
Project Table Lists the Project Name, Project Manager, Priority, Status, Start Date, End Date, and some baseline budget info.
Resource Groups Lists the functional groups (Electrical Engineer (EE), Mechanical Engineer (ME), etc.) There are 9
Milestone Table Project, Title, Priority, Status, Client Billing Amount, Schedule Risk, Technical Risk, Owner, Start Date, Due Date, and some budget lines and descriptions
Alright, So I can't for the life of me figure out how to structure the monthly allocations in a usable table/form. This is what I would like it to look like, similar to the excel document we used to track it in.
How can I create a table that will store all of the data (Project, Resource Group, Month/Year, and Man-months) with inputs from a form that will automatically show the relevant months (between project Start Date and End Date)...
I'm creating a database for my job. I have 4 tables with information. When I need to deliver some items i must know which items to take, They are in those 4 tables.
I want to make it that i can click a menu on my switchboard that i see a report with all the information with a clickbox behind it. If i select this box and click a button generate it creates a report with all the items i've selected with the select box.
So in short:
1.) How do I create a table with all the items from the other tables that are automatic updated when insert a items in one of those 4 tables.
2.) How do I create a report where i can select some items that are generating a report with the selected items.
I want to be able to perform an AND search on a field where both specified values must be present for an item to be selected.
I have a table with some properties of items. Each record in the table is for a specific item and one of its properties. Say for instance that I want to list the items that are described with both "red and green". Assume that there are entries for widgetA to widgetG with colors "red, blue, yellow, purple" and widgetB and widgetE also has the property "green" in addition to the others ... the query should return widgetB and widgetE only.
I tried to use MSAccess 2003 query builder but cannot get the AND result to work. I switched to an OR and verified that the two values I am searching for do exist for two items in my table.
Here is the SQL statement that did not work. SELECT Properties.PropertyIndex, Properties.HerbOilLink, Properties.PropertyTypeIndex, Properties.PropertyDescriptionIndex FROM PropertyType INNER JOIN Properties ON PropertyType.PropertyTypeIndex = Properties.PropertyTypeIndex WHERE (((Properties.PropertyDescriptionIndex)=80 And (Properties.PropertyDescriptionIndex)=15));
I have two tables to track our engineer visits, one tracks the visit as a whole and the other tracks the individual instruments the engineer worked on during that visit. This way I can track visits to customer sites separately to the visits made to an individual instrument.
Right now, I create a visit and then add Visit Lines (containing the details of the instrument visited). These instruments, or 'Visit Lines', are being displayed in the Visits Table via a related items box. Visit lines are associated with Instruments in the Instrument Table via a serial number lookup. All this works great...
However, I want to display both the serial number and the instrument description in the related items control in the Visits Table. Since the Visit Lines table only has the instrument ID lookup and not the instrument description I can't display it in the control.
I need to either:
a) Create an instrument description in the Visit Lines table as a lookup and have this automatically pull in the description based on the serial number the user selects.... which I can't figure out how to do - it's just an autocomplete.
b) Create an instrument description in Visit Lines and have a macro grab the corresponding description from the Instruments table based on the serial number input - but just for this record...
I have a table of items for our companies quotes. When we go to print out our quotes to send to the customers, the salespeople would like most of the items to be grouped under certain "headers" for the systems they are part of.
Ex:
Autopilot System Part #1 Qty 2 Part #2 Qty 1
PA/GA System Part #4 Qty 4 Part #5 Qty 1
My 'Items' table currently has these fields:
ID (PK) System_ID (FK for 'Systems' table) Part_No Qty
etc...
'Systems' table has these:
ID (PK) Sys_Description
I have a query using a RIGHT JOIN and a GROUP BY to tie everything together, I'm just not certain how to go about displaying the information the way I did above.
I have a form with a textbox, listbox and a button.
my textbox is based on one of my tables, and when I enter a value (which is saved in my table) in my textbox and press enter, certain values in my table goes to my listbox, and my listbox will just additem whenever I do same thing in my textbox all overagain.
how can I subtract listbox.column(1) items in my table field "Item_Quantity" where my Listbox.column(0) is equal to my table field "Item_Description".
My Listbox column count property = 4 Row source type = value list
I have two options on the main switchboard page and when I click on the second option it goes to a secondary page that gives me 3 options with the third option being to return to the main screen. When I select that option it does go back to the main screen but then on the main screen it shows the return to main screen option as well and when I select it.... it says " There was an error reading the switchboard items table." But I want the main screen to only show the original two options only.
I just want to know how to manage items in set and individual item. Suppose my product list are
individual items = A,B,C,D,E,F,G,H,I,J,K and 5 pc set = A,B,C,D,F and 3 pc set = G,H,K
How should I design the table. Previously I designed the table for individual items and whenever orders for set is placed user had to enter individual items with quantity.
E.g. order is for 5 pc set = 3000
A=3000 B=3000 C=3000 D=3000 F=3000
Now I need to just say 5 pc set and it should be automatically populated. And also if order have combination of individual and set items.
I have a small database I am building to log and record Calibration Details Of thermometers etc. I have several table that are related, no probs so far.
However I am struggling with forms and reports that use data from the asset table more than once. IE. I have a calibration unit (this is an asset as this also needs calibrated ) that I use to test the thermometers (These Are Assets) but this is also in the same asset table as the thermometers. I need to reference the Calibration unit and the thermometer or whatever item I am testing on the same form or report. I seem to have got round the form problem but i am stuck on the report as access keeps linking to only one item, how do I make it link to 2 items on the same table on the one report.
1) Create a table with a single text field 2) Enter some text values, including one which begins either "aa", "AA" or "Aa" (but not "aA"!) 3) Sort the field, and note where it puts the string(s) created in (2)
For me, they appear at the wrong end of the sorted list! I have tested this in Access 2007 and 2010 and it only happens in 2010. I'm using 32 bit Access on 64 bit Win 7 Pro.
I'm creating user form items (text boxes/combo boxes) for a user to enter data in. In this case it would be for a part. What I would like to happen is, if there is more than 1 part, then after the first part is entered, another part entry item is added below the first one but only if the first one has a value - for a virtually unlimited amount of parts. BUT if there is only say, one part to be entered, then the next section of selection appears directly below the blank next part. Sooo, something like this.......
Invoice:
Part1: (THE PART HERE) Part2: (THE PART HERE) Part3: (THE PART HERE) ... ... ... ... Partn: (THE PART HERE) - blank
(aButtonThatProcessesThis)
OR.........
Invoice:
Part1: (THE PART HERE) Part2: (THE PART HERE) - blank
I have created a form with a 2 column list box. This is populated using vba but when I open the form in form view I cannot seem to select any of the items.
I would like to be able to copy a single record in a table and then paste this record a pre-defined number of times 10,20,30 depending on requirements. The reason I need to do this is that I want to set up a number of identical records that can easily be amended into unique records. This will vastly reduce the amount of work and time spent entering records individually.
The only way that I have been able to achieve this is to copy and transfer the master record into Excel, and then copy the row and paste it into a range of cells. Copy the range of cells back from Excel and then paste this range back into the Access table.
This works but is long winded; what I would like to know is is there a simply way of achieving this.
What I would like to know is this: I have produced a basic members table containing individual's details etc. How do I now produce an individual report for selected members (single page per member), in which I can determine which of the table details are included?
I have a form in datasheet view that has a user directory with a list of each person. On each row you can click to open another form that contains the users details using the below VBA:
But once you open to that specific record, no other records are available to navigate to.
I want to be able to stay on that detail form that was opened and go to another record.
How do I continue to pull up that specific user in my detail form, but also load the others so I can navigate to them from the detail form without having to go back out to the datasheet form?
Newbie Access user here, with what I hope is a fairly easy task-- I have a form which contains fields for info about clients and a subform which has only one field for a corresponding video tape number. Is there any way to limit the record for this subform to one single entry, so that when I hit Tab after entering the single number, the second record in the subform will not appear, but rather I can jump to the next record in the main form? If not, then can I just tab through the main form, into the sub form and then onto the next record? Is there a shortcut to create the next record other than having to manually mouse click the next record arrow at the bottom of the form?
I have 1 table, 1 form and 1 report. I am trying to get the report to display just one entry on the table at a time, so I can preview it, then print or create a pdf from it.
I am stumped when it comes to coding - a complete newbie to it if I may also add - but I am sure there is a way of just displaying the record that is currently open in the form, as the report.
And is there a way to get the report to just display and print one entry rather than the whole bunch!!
