when I open a pdf through access weather it is by hyperlink or attachment it always opens the full size of my monitor, if I open a pdf outside access then they open ok , how do I set the size that access opens the pdf the size I want.
View RepliesIs it possible (using the menu or VBA code) to find out the size of the objects in an Access database file?For example if the .accdb file is 300Mb, is there any way of comparing the size of the numerous tables/forms/reports/queries etc, that make up the database?(I know that if I created a new access file and imported the objects from the working database that could give an indication but that would be quite a repetitive process).
View 4 Replies View RelatedI use below simple command line to start a macro in my Access database. Usually all works well. I start my bat file, command is executed and macro does its job.
However it always fails if I have a session of Access already opened even if it is a completely different database. If I use below then it opens another sessions of Access but does not execute the macro. I need to go into the second session and run macro manually. It works fine then.
Code:
"C:UsersMeDocumentsDatabas1.accdb" /X Macro
I was successfully using a front end and back end setup for the past two years. Today I needed to push through some changes and "deactivate" the previous back end database and setup a new back end database. The new back end database has been sent; however the front end is not recognizing the back end database anymore. I need to re-link the existing front end to the back end database - I cannot import the front end into a "fresh" file because I put a password on the VBA Editor.
View 14 Replies View RelatedI am currently using Access 2010, and have successfully split a database, using the Access wizard.However, whenever a second or third user opens the database - with their front-end database file - they encounter the following message;The Microsoft Access Database engine cannot open or write to the file ". It is already opened exclusively by another user, or you need permission to view and write its data.
I have researched the internet and see that it has something to do with network permissions. I have worked with my IT department and this appears to be resolved!
Is there a setting I need to check in the front-end and/or back-end copies of the databases?Why is there no file name in the error message?
Hi,
I would like to open the MS Access Window in a certain position and size.
Somehow similar to open a form when using:
- to set the position and size:
Private Sub Form_Load()
Form.Move Left:=11500, Top:=6500, Width:=7000, Height:=6000
End Sub
I would like to open the MS Access Window within the screen area at a certain location, and having a certain size.
Is there any option in the Access Menu, or I can write some code, and where has to be written, so when I double click on the *.mdb file, the MS Access Window will open where I want and the size I want.
Thank you.
I had a massive Access file of almost a GB in size. and I deleted all records off the tables hoping it would shrink and my purpose was to have the tables alone in their structures. However despite deleting all records, the database file size seems to stay the same. anybody knows why this is so? I don't think we can "commit" changes to databases done in access as it is done in other databases. anybody knows why this is so?
View 3 Replies View RelatedI have been using access 2003 at my work place.
When I bring back my access 2003 project from work back home, i open the project at home, I am using access 2002 or 2000 format.
Then I notice if I save a copy of my work using access 2002, while initially using an access 2003 database, the file size decresaseas dramatically, from like 3mb to 800 kb?
any reason why?
No data seems 2 be lost.
Cheers!
I have an Access 2010 database .. and will be adding about 25,000 records a day to it. So it will get pretty big fast .. so 9 million a year. Is this too big for Access ?? Or is it more a issue of file size .. I know that Access 2010 can go up to 2 GB. I am interested in how I can maximize my performance and not have the database.The data is as follows .. One table. The other tables will be small, just this one will increase in size really.
Id .. Autonumber (primary key)
When .. datetime
Radio .. integer (indexed .. w duplicates)
Group .. integer (indexed .. w duplicates)
Type .. text 4
TransType .. text 2
I am considering a purge of old records if needed .. like only keeping the most previous 5 million records or some reasonable number. Like .. then I would think I should try to number my records backwards (using long int rather than autonumber and number records backwards on import) .. ie record 1 would be the most recent one and only keep the last X number of them for performance reasons.
I have a button in the form of the current access file. What I want to do is when the user click on the button,
triggered the vba to backup current access file. But since the file is currently open, is this possible? If yes, may I know how to do it with vba?
I have tried two methods but failed:
1) Use copytofile method, but I get permission denied due to file open;
2) Use dbengine.compactdatabase method, but it also has problem if the file is open.
I need code for save dialog file ,and select the file from textbox and save it to the selected location.i have only this code and i dont know what else i can do with this because it just opens the save file dialog !
View 1 Replies View Relatedthis cod ein access vba for opening a file dialog and selecting a file in a textbox ..
Private Sub Command26_Click()
Dim fDialog As Object
Set fDialog = Application.FileDialog(msoFileDialogOpen)
[Code]....
this code,on the form i have a button whose click event is this code and a a text box with it which is text29.
It gives an erro
Run time error '2185':
you cant refernce a propery or method for a control unless the control has the focus .
Cannot Open Database". It may not be a database that your application recognizes, or the file may be corrupt. I have a colleague that is using Microsoft Access to import objects from SQL server but he's getting the above error. I've checked the login my colleagues uses and it has all the right permissions ect but I cannot seem to figure out why this error is still happening. Is it something to do with the SQL server or Microsoft Access?
View 1 Replies View RelatedI have a database setup to keep track of spare parts in my inventory. I want to have a button on my form page that will bring up a file with pictures of the object.
View 5 Replies View RelatedI have a field on a form which the user currently has to manually type in the file path to a specific picture on a local drive. After the file path is entered, the path is linked and the picture is shown in an image box. I did this because I didnt want to bog the database down with attached files.
I wondered if I could have a browse button, which when pressed brought up the browse window to allow you to locate the image (using the standard windows browser). Then when you clicked ok, it writes the filename into the correct field on the form.
All of the sudden I get an error message when I try to open my database from a file rather than through Access. If I open Access first and open the file that way, there is no problem but if I click on it from Windows Explorer, I get the error.
See picture.
I want to open the 'Save Backup As' Dialogue Box from the file menu, using a Command Button on a Form in Access 2003.I know you can do this manually but I would love to do it programically.
View 4 Replies View RelatedI am using Access 2007 database in work environment. When one of my colleagues tried to update some records in a table, it created a backup of the database.
The issue is that the size of the actual database is much smaller than the size of the backup. However all the data are present and I don't think any data has been deleted.
But I don't know why there is a difference in size?
Some of the tables in the database are linked from MS SQL Server.
I often create contract using mail merge. I have an access file that I want to use as data source for word file. But it does not automatically.
Please download the attached file !
If there are 1 customer and 1 property, I do not need to do anything. Conversely, if there are many customers and many properties, I take time to manipulate.
Firstly, I open the word file. I have to copy and paste paragraphs that I want. Highlight of the original paragraphs is blue.
Secondly, I click 'Insert Word Field' -> select 'Next Record'.
In short, I wish to use VBA in access file to automatically perform the steps that I have outlined.
Hi,
We have an old SQL server here which has died a horrible death and I need to get the data it contains out!
I have the .MDF files etc but I cannot seem to open them or import them in microsoft access.
I dont need to do anything flashy with it, just look at the tables!
Can anyone help?
Thanks
:)
I am not an experienced Access developer.
I have a .mdb file that was created with Access 2000. Before I upgraded to 2003, I opened the file source by holding down 'shift' and double clicking the file. Now when I do that, it runs the application. How can I open the source file again.
Thanks
Anthony
I saw a demo that the user could copy and paste a JPG format file physically to ACCESS, and then something happened, and ACCESS could read the JPG length and width size (e.g. 1.3 meter length and 1.15 meter width) into 2 individual ACCESS cells which is acted the same as user input to that 2 clells.
View 14 Replies View RelatedGood Afternoon,
Does anyone know where I can find a sample db that will let the user do the following:
Selected a file from their computer and upload to a the same folder as the db?
I am building an Investigation database. This function will allow the user to attach file to an investigation. (the files will be stored in a folder and logged on a table)
Any help would be great.
Thanks,
Bones
Hi,
I am trying to open an access database (Access2002) from my computer ( C: est )
and I receive the error :
Microsoft Access cannot open this file.
This file is located outside your intranet or on an untrusted site.
how can I fix this problem ?
regards,
Jam
We have a database on our network server which I cannot open. I get the following error everytime I try to access it.
This file is located outside your or on an untrusted site. Microsoft Access will not open the file due to potential security problems. To open the file, copy it to your machine or an accessible network location.
I think it has to do with a Microsoft Jet 4.0 Service Pack 8 security update. However, I cannot find the update to uninstall. Others can access the database located on the network, but some get a pop-up that allows them to say "no" and access the file. The pop-up has the following message:
Security Warning: Unsafe expressions are not blocked. Do you want to block unsafe expressions?
Can anyone help with this?
The file is part of a students exam, so a bit urgent!
The file just will not open, either by double click or open in Access. Tried holding shift, not the problem, not hidden or anything, just that trying to open brings up the first warning box (we have very strict security on students computers!) but after that nothing, no sign of an error or anything having been loaded. Tried compress & repair and the microsoft tool for compressing JET files, that did give an error when it tried, just saying error compacting database.
I've tried importing the file into a new database using access, that gives no results, but importing tables into excel does!
Anyone anyideas short of paying for it to be done?
:confused: