I have this table
Year AvgOfValue
2005 109.061690295772
2009 106.801581389669
I have to calculate the percentage of change of the values. I have very basic knowledge. How can I make a query to calculate the percentage of change?
What I'm looking to do is calculate the success rate (%) of compliance rates with Quality Control paperwork. Essentially, each record has 12 "check box" fields representing the different QC sheets that are submitted each day.
QCflavourChange
QCfillerOperator
QCblowMoulding
QCtorqueTest
QCnetContents
QClabeller
QCpacker
QCpalletiser
RMpreform
RMclosure
RMlabel
RMcarton
I have been able to find the code for counting the success rate of a specific type of QC sheet across multiple days worth of testing, eg:
=Sum(IIf([RMpreform]=True,1,0))])
But I have been unable to determine how I can count the total of all the successful fields listed above, across a single record.
How to calculate the percentage of kilometers per order compared to the total number of kilometers per carrier.
In the attached screenshot send queries where I need formula.
Mileage on the orders of the field called "Korkma" . The formula should look like: # [Korkm] / [total kilometers per carrier] #.
I do not know how to get the total mileage driven by the carrier (the carrier is in the query in the Field Name Plate) for the month.
For example:
date 1.1.2013.,Plate:Pribus Korkm= 37
date 2.1.2013.,Plate: Pribus,Korkm=56
date 10.1.2013.,Plate: Pribus, Korkm= 70
Formula: [37]/[163] = 0,23
[56]/[163]= 0,34
[70]/[163]= 0,43
To calculate the percentage of the number of passengers in the total number of passengers per single order using query:
Code:
SELECT
Code:
A.Date, A.Plate, A.Pax, A.Agency, A.Code, IIf ([pax]> 0, Round ([Pax] / (SELECT Sum (Pax) FROM Sheet2 as B WHERE B.Date = A.Date and B.code = A.code), 2), 1) AS KOR
FROM Sheet2 AS A
ORDER BY A.Date;
Query works fine in all cases except one, and that is when the encounter a same order in one day
01/04/2013. D_1 0pax
01/04/2013. D_1 5pax
in this case the formula gives a coefficient of 1 to 0 passengers and coefficient of 1 to 5 passengers, should be given a score of 0 0 of passengers and 1 to 5 passengers
I obtained data for earnings by industry for men and women over time (5 years). I developed crosstab query that showed the average earnings for men and women for the 5 years.
Now I want within this query to calculate the differential between men and womens average earnings and calculate a percentage within this crosstab query. I tried to use Expressionbuilder with little luck.
In a report, I need to calculate the percentage of clients that respond "Yes" to a question on a survey. I need to create a query that will return the count of the number of "Yes" responses, and the number of total responses.
For example, if 10 clients complete the survey, and seven respond "Yes", I need the 2 fields in the query to be 7 and 10. So far, I have only been able to do this using multiple queries.
Thank you.
Does anyone know how to add a column to an existing table that would calculate percentage?
Thank you very much in advance!!!
Hey,
I'm unsure of how to do this one, any help would be appreciated.
The database I'm working on has around 2000 records within the parent table. These reflect projects around the world.
the child table has records on how much these projects cost.
I would like to calculate the % of projects cost less than £50,000, then, the % of projects between £50,000-£100,000 and so on.
i'm not entirely sure how to do this, anyone have any ideas?
Thanks
Hi, Thanks in advance. I am trying to calculate percentage, it has to round to the nearest, and also if the percentage is greater than 100 then it has to write 100%.
formulae: c=(a/b)*100,
example: c=(8/3)*100 =266.66% but this is more than 100% so i need this as 100%
example2: c=(2/3)8100=66.66% but i need it to round as 67%
i've 3 controls on a form a,b,c. so c has to calculate by itself when they enter data on a and b.
thanks,
sam
I have an Access 2009 report that displays the sums at the bottom of some columns. Is there a way to calculate and display the percentage one sum is of another?
Column1 Column2
Total 12,000 9,800
Percentage 100 % 81.7 %
I have two fields CountOFAppeal Description and Amount Solicited.
I just want to get the percentage of response.
So this is what I used:
=[CountOfAppeal Description]/[Amount Solicited]*100
When I go into the properties to format it to % and add decimal places I get a crazy number
2520.46% When it should be 25.20%
When I change the format to general number the decimal point is in the right place 25.20.
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100
num_2 = 10
percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
I'm very new to Access and I'm attempting to write an expression in a query that will calculate the % of the count of "Exchange" field (Exchange is a text field and is grouped and the count based on each unique name) where the total count is based on the filter where "Group" = 'FS' or 'S'.
The below seems to work, but there is a better way of going about this (especially if I have to add more filter criteria). I added a pic of the query I'm trying to build.
PercentofTotal: (Count([Exchange])/DCount(Count([Exchange]),"[Holdings]","[Asset Group] = 'FS' OR [Asset Group]='S'"))
I am trying to count how many of the "same" and "differences", as well as calculate the percentages of the number of "same" over the total amount. To clarify, I work at a nursing home, and I need to calculate the number of people who were admitted to our facility and then to the hospital for the same diagnosis, and a different diagnosis. Then, out of the total number of people who were admitted to the hospital from our facility, I need to calculate how many of those people had the same diagnosis or a different diagnosis.
Also, I need to categorize these diagnosis by each type of diagnosis.
I have a "make table" query. Inside that query there is a simple expression that divides two fields by one another to arrive at a %. Example 5/100=5%. However, the data returned is not in a % format.I know that I can go into table properties and change the fromat to "percentage", but that will only work for the current table that I have created. Once I re-run the "make table" query, I lose the change to the format, and my value again returns to a number, not a %..
Is there any way to always have a percentage returned without having to manually change the format each time that I run the query, or having to make a "delete" and "append query" ?
On a table I have a field labeled "Interest", and it is for what you would expect.
I have the data type set to Number, and the format set to Percent. For some reason I cannot change this field, it keeps resetting the value back to 0.00% even though I type something else in.
Access 2007
I'm new to this and I've created a report that shows evaluation scores before and after for some training we are delivering. The Query I've created works out the percentage of change for each record. The problem I'm having is that I can't now summarize these percentages for each instructor.
What I'm entering to retrieve the percentage score is:
=(Sum(IIf(IsNumeric([Percentage Change]),[Percentage Change],0)))/(Sum(IIf(IsNumeric([Percentage Change]),1,0)))
What i get back is as follows:
Before score = 2.85 (correct)
After Score = 4.22 (correct)
Percentage of Change = 55% (incorrect this should be 48% )
I'm trying to calculate the percentage change between records/rows. I've searched around the internet and found 2 possible examples, but they are very specific to the individual's database and I'm struggling to understand.
Here are two examples:
[URL] ....
[URL] .....
I believe I need to create a query based on another query (which I can do). I would need to create a column in the new query that calculates the percentage difference, but what's the formula/contents of that column?
I use Access 2003. I've set the Data Type on a field name to = Percentage
I've tried to use all - Field size types
I want to enter in 50 in the table and have the output be 50% currently it goes to 5000%
Is there anything i have to add in the Validation rule to make it show the exact value?
I have a table with the following fields; Row; AnimalID; Weight: Date_Weighed (see attached screenshot example).
I would like to make a query that gives me the percentage weight loss/gain since the last time a particular animal was weighed. For example, animal AAA gained 100% between 2014/01/01 and 2014/02/01. Animal CCC gained 0% between 2014/02/01 and 2014/03/01.
I plan to use this to create a pop-up that informs me if an animal had lost over 15% of its bodyweight since the last time it was weighed, indicating either a loss of body condition, or that a female has given birth.
I have created a database that records the scores of each player etc and puts them in league table like structure.
Within this database which I would like to extend I would like to know if its possible to have a query to calculate a league table for the teams if home team overal score is greater than away team home team get 2 points for win 1 for draw no points of loss and same if away team won.I also want to be able to change it to a web database and add club address details like contact list to it.
I am trying to write a function in an access 2007 query that will calculate the date range for each of my records based on the month-ending date and the In-transit days assigned to each record (excluding any weekend days) (i.e. if the in-transit days number is 5 & the month ending date is 5/26/12 then my date range would be 5/22/12-5/25/12). I want the funtion to calculate the range, I cannot use parameters as each record will have a different range based on it's in-transit days .
View 1 Replies View RelatedI am trying to create an attendance database, our company introducing the point system attendance,
Called Off (CO) 2 points
Left Early (LE) 1 Point
Tardy (Tar) 1 point
Employee can reduce point if they have perfect attendance for 90 days from the last day of violation. For example, an employee absent on 01/01/2015, he will received 2 points, the credit will giving on 04/01/2015, if there is no violation, but if he absent again on 03/31/2015 not only he will received 2 more points his 90 days will start from 03/31/2015, now he will eligible to get credit on 06/29/2015 and so on.So far I have created 3 tables and 1 query.
Tables
Employees: Id, Last Name, First Name
Points: Id, Description Points
Attendance:Id, Date, Employee ID, Points ID
Query
Date
Employee ID
Last Name
First Name
Point Description
Points
how and which formula to use which calculate the points based on above example.
I'm guessing it's a syntax problem.
This one doesn't give me an error, its just blank:
=Count("[QueryName]![QueryField]='String'")
This one gives me an Error. It's supposed to calculate a percentage. [ReportField] is working properly:
=[ReportField]/Sum([QueryName]![QueryField])
I have a subform based on a query. In that query, I have calculated values for price+tax and another price+discount+tax. Now I have a conditional formatting that if the gross total is not equal to amount due, the amount due box will turn red. However even if they are equal visually, it still turns red. Ex. The gross total is 336.00 and the amount due is 336.00 also, so it should NOT turn red, but it does. When I click on the amount due control, the value turns into 335.999999195337. How do I tell access not to make 336.00 into 335.999999195337.
View 3 Replies View RelatedI have problem that my chart in report cannot display values in "percentage" as it is in query no matter what.
Sample is in the attachment.