General :: Memo Field In Database Will Only Send About 255 Characters
Sep 17, 2013
I have been trying to figure out this issue concerning the memo field in the database will only send about 255 characters. I am using the cmdEmail AssignedTo : On Click macro and the Message text and have two memo fields and only one will display and the one that does only displays about 255 characters
The message text ="Issue" & ":" & Chr(13) & [COMMENT] & Chr(10) & "Resolution" & ":" & [RESOLUTION] & Chr(10).
View Replies
ADVERTISEMENT
May 14, 2013
What should I do so I can use memo field in database as a memo field so I can write text in more than one row.
For example what is happening now when my user pres enter he does not go to a new row in memofield but he goes to new record.
In fact how can I get something similar to this wysiwyg type?
View 2 Replies
View Related
Dec 20, 2003
Hi
I'm new to forum and can't find an answer to this problem. I am using Access 2002 and have a memo field in a form that I want people to be able to type in as much text as they want. This is then displayed in a report. The form accepts the text with no problems however when I view it in the report it has been cut to 255 characters as if it is a text box. I have set the properties to 'can grow' to no avail. I have searched the MS Knowledge base for a solution with no luck. I admit I'm not an expert in Access and would really appreciate some help as I have been trying to overcome this problem for days.
View 2 Replies
View Related
Oct 3, 2005
I'm trying to develop a form that opens when you select a tab from another form. The first form would contain Standard Instructions (from a table) and the second form would have a Memo Field for special instructions. The user wants to be able to click a check box for each standard special instruction and when they close the first form all the check standard instructions to update the special instructions memo field on the second form. I'm thinking I have to set up a loop to go thru all records when the first form is closed. Any ideas on how this would work best?
View 1 Replies
View Related
Jan 15, 2008
Hello,
I have an unbound form where the user enters feedback, usually > 255 chars. When they hit the "Submit" button, an append query adds this to a memo field on a table. A memo field should be able to hold 65,000 some characters however everything after 255 turns into a special character, mostly boxes. Any ideas on how to retain the text?
Thanks for any suggestions!
Stone
View 2 Replies
View Related
Nov 16, 2007
I haven't seen anyone run into this particular problem on this forum...
I'm importing data from an excel spreadsheet to an MS Access (2007) table. One of the fields in the table is a text memo field able to support more than 255 characters...
Issue:
The issue is that any cell in Excel that is greater than 255 characters is truncated when imported to MS Access even though the field is a memo field. There isn't any documentation on Microsoft's website about this and I don't see any way to work around it other than manually copying the data from excel to MS Access.
Anyone have any input on this matter?
Thanks in advance!
View 3 Replies
View Related
Nov 25, 2013
Two Solutions to address moving an Access Memo field into Excel when string has > 255 characters. All my 'reports' use Excel VBA (Access Reports are not used). The Excel reports can have 40,000 records. Speed to create the report can be an issue.
Describing 2 Solutions below to address moving Access memo fields with > 255 characters into Excel.After running this code
Code:
720 ObjXL.DisplayAlerts = False
ObjXL.Columns("X:X").Select
ObjXL.Selection.NumberFormat = "@" ' set column to Text
730 ObjXL.Worksheets(intWorksheetNum).Cells(intRowPos, 1).CopyFromRecordset rsNutsAndBolts
The Comments column are limited to 255 characters. So, the CopyFromRecordset (recordsetvariable) creates the 255 character limitation.
The reason? The 255 character limit is because CopyFromRecordset sutomatically uses the Characters property of the Range object. The 255 limit would not be there if the Cell Value property is used to assign the string to that cell.
Dim sRx as String ' String Prescription
sRx = "String with > 255 characters ... you fill in the rest ...."
Cells(1, 1).Value = sRx ' Cell's Value property assignment can be very large
Solution 1:
The record set is still in memory. By using a loop, a cursor can start with record 1 (memo column) and assign that value to the Excel row / column using the .value as shown above. Basically, this moves one memo field at a time, record by record. e.g. Read First recordset in Access, copy to variable, assign value to Excel row/column Then move next on each Access and Excel.
Solution 2:
An Access Memo filed [RxNotes] can have up to 750 characters. Cut it apart into three new fields that end up out in the very right Excel columns AA, AB, AC.
Note1=Mid([RxNotes],1,250)
Note2=Mid([RxNotes],251,250)
Note3=Mid([RxNotes],501,250)
Then using Excel Object - Concat the cells back cell by cell...
X2=CONCATENATE(AA2,AB2,AC2))
Then delete the columns AA, AB, AC to hide the evidence..Neither solution is all that elequent. Read about this and by golly, it made a difference
ConcatComments = "'" & CommentString
Before using the CopyFromRecordset be sure to add a single quote in front of the large string.
Turns out the interface between Access and Excel look for this to prepare Excel immediately for the string to be a string, not something else. Some of my strings had weird print characters that kind of looked like Japenese characters. It seemed random, it always happened if the string was 255 or more characters (ramdonly, not always). The single quote doesn't show up in Excel, but got rid of all the noise.
View 5 Replies
View Related
Jun 11, 2015
I need a form that will send a email to certain contacts depending on which box is ticked
Have never done this previously would this be possible
View 2 Replies
View Related
Sep 17, 2014
I have a requirement to send a email to individual clients via my access database 2003 . I am using the email address of the client in the current open form . I then created a query using the id to filter that particular client, this query then becomes my record set.The content for the email is held in a .txt file , On my c drive . Every things appears fine however the fonts that I select in the .txt file are not being use in the actual email body. I created a word document with my preferred fonts and copied and pasted them into the .txt file but on sending the email the selected fonts do not appear.
I have attached a demo of what I am trying to do . To test enter your own email in the email address field of the form . Note the .txt file is on the C:/ drive.
View 4 Replies
View Related
Mar 1, 2006
I have a data entry form with a memo control physically sized to match the allowable space for this information when printed on a report.
Basically, I need to be able to stop the user from further input when the cursor reaches the lower right corner of the memo control. Beeping when reaching the limit is acceptable, but a pop-up message would be ideal.
I have not been able to find a solution that will limit the amount of text displayed in the memo control that will also include however many LF's a user inputs. All of the search results refer to only limiting the number of characters and do not take into account LF's.
I am new to Access and would appreciate all suggestions.
View 2 Replies
View Related
Apr 11, 2013
memo fields chopping the content when appending to another table memo field.I have a query that takes in a couple of tables and then appends the content to one larger table.In each of the smaller tables there is a memo filed that when I check it has the entire type content in above 255 without a problem.
When the query runs and appends it to the larger table the content in the memo filed is chopped down.Both tables fields are set to memo I have double checked this.I have seen some comments about unique values in the query properties but these are set to NO as advised but it still does this.
View 4 Replies
View Related
Jan 6, 2013
The database contains the records of a collection of thousands of photographs and negatives.
One of the fields contains information on the subject matter of each pic and can sometimes be very long. The field was changed from text to memo so as to hold more characters but they appeared in one long string, which means a lot of scrolling to see the information. That has been changed back to text and we are adding a second or third record such as xxx-xxx-xxx cont1 xxx-xxx-xxx cont2 so as to get shorter strings. Is there a way to make the text wrap onto a second or third line automatically after a specific number of characters have been entered or can a carriage return be put in to force the text to a new line?
View 5 Replies
View Related
Feb 7, 2013
I'm developing a program to search several fields. One of which is a memo field with large characters. Using wildcard in the search form I made, it only returns the record if the first word of the field is typed in the search box. I want to type any word in any part of the field to return the record.
This is my code
' Check for LIKE Subject
If Me.txtsubject > "" Then
varWhere = varWhere & "[subject] LIKE """ & Me.txtsubject & "*"" AND "
End If
subject is a memo field.
View 5 Replies
View Related
Dec 2, 2014
How do I change a txt box to a memo field on a form? (I need to allow for more than 255 chars...) I've already set the backend DB (sql server) to accept the many chars, and the linked table access see's the datatype as memo. But I can't figure out how to get a memo field on the form, or how to change the current txt box to a memo control to support the extra characters.
I've been looking for 20 minutes... I guess I never used a memo field before, since I can't find/see how to set this.
View 12 Replies
View Related
Jun 17, 2014
for example how can I extract the following number from the field ITEM 117145 5410076462162, 714774 117072 5410076462223 ,714768 117153 5410076462285,733289 998214 5410076462193 from this record. The field is memo. The common: the string "+" always is in front I tried this Expr2: InStr([ITEM],"+"), but it only give me first one.
The following is record
BARCODE Retail Line Code NSL Code Prod Ean Name Size Facings Capacity Pos Comments Offer Description Offer Type Offer No 5ELKAHQ*agiaji+ 714766 117145 5410076462162 NS PRNGLS SUR CRM AND ON 190G 3F 15 BUY ONE GET ONE FREE MV 105574 5ELKAHQ*agiagh+ 714774 117072 5410076462223 PRNGLS ORIG 190G 3F 15 BUY ONE GET ONE FREE MV 105574 5ELKAHQ*agiddd+ 714768 117153 5410076462285 PRNGLS SLT/VNGR 190G 3F 15 BUY ONE GET ONE FREE MV 105574 5ELKAHQ*agibia+ 733289 998214 5410076462193 PRNGLS BBQ 190G 3F 15 BUY ONE GET ONE FREE MV 105574
View 6 Replies
View Related
Sep 5, 2014
I'm trying to concatenate two text fields into a memo field using an expression in a select query. My problem is that the text fields together end up more than 255 characters, so I need the resulting field to be a memo instead. I can't change the underlying text fields to memo fields because this is a large database used by others who need those fields to be text.
View 3 Replies
View Related
May 28, 2012
How do you Send SMS from Access database? I received a SMS from my dentist and the receptionist told me that the database sent it. I was wondering how it is done.
View 2 Replies
View Related
Apr 10, 2014
how send SMS to phone by using text from access form.
View 3 Replies
View Related
Mar 28, 2014
I have two databases, both have mysql backened and access frontend.
In first database, I'd like to access the second database, check if that person has an entry in the second database and then fetch that data into the first database. To make it easier, data come from different tables (though I'd probably access only one entry in each table)
Not sure where to start, the only idea I have is to link tables from both databases into the frontend ad then it's kinda easy (would have to rename the tables).
View 1 Replies
View Related
Feb 26, 2006
in my form I created an unbound field with a requested combination, now how can I put those in a table field.
in other words, how can I send the content of a form's unbound field to a field in the table?
your help is very appreciated.
Regards,
CS.
View 3 Replies
View Related
Aug 8, 2007
Hello,
when I update a form with a new record, that record will copy to any previous record that I click in the same form.
This only happens when I'm adding records to a table that contains a memo field...
Anything I need to keep in mind about memo fields?
Kind regards,
Hans B.
View 1 Replies
View Related
May 3, 2013
How to rename a field throughout the database.
View 2 Replies
View Related
Sep 18, 2013
We have created a database where data entry happens on the first form. So far all is working well on this form except users complain there is not enough space for comments. I set up a column for comments, but it is limited to 255 characters. What/How else can I set this up to provide a lot more room?
View 1 Replies
View Related
Oct 12, 2012
I need to import circa 900 .txt files into a dbase (yet to be built), they are all of a standard format/layout. I need to import the top line into about 9 columns. So not sure how, but it can be mapped to pull the same digits per column every time.
View 3 Replies
View Related
Mar 1, 2013
I have a date value in text format that is 5 character and want to convert it to a proper date format. Here is a sample of the data:
07301 actually represents 7/30/2011. How to actually convert that value to the date format of mm/dd/yyyy?
View 7 Replies
View Related
Jan 18, 2013
I have a data base,one of the field contain Data like "ZZZ-DEFS#UUH1234567".
There should always be 19 characters in this field including #.I want to design a query which can sort out entries less than and more than 19 characters, so that wrong entries can be corrected .
View 3 Replies
View Related
