Generating Reports From A Form After Selecting Dates And Parameters
Sep 11, 2014
The input form of the database have one common table containing data for all parameters for row source. As all data was in one table had one ID. My problem is I am trying to run reports from a form after selecting dates and parameters.
For selecting parameters I created dynamic combo box. For dynamic combo box I needed ID and description of the parameters. So I created separate tables for each parameter with ID and Description column. Which ran me into the problem that when I run report based on main input form which has different row source table and my report form has different row source tables and reports doesn't run when I base my queries on the report form.
View Replies
ADVERTISEMENT
Sep 9, 2013
I have a library function that will allow the user to nominate a query (as one of its arguments) in the calling application which must have an email field. The function will then Do Loop the email field, concatenating it before creating an email and addressing it. The intended functionality is that a developer can easily create a group email, just by creating a query.
This works fine if the query is filtered "statically" - i.e. I specify which group of people by typing in their "Site_ID" in the criteria. However I want developers to be able to creating dynamically filtered queries (perhaps by the group's ID on a calling form). Within the query (to test it), the filter is therefore [Forms]![Test Function Calls]![Site_id]. When I run the code, I am then presented with "Run-time error 3061: Too few parameters. Expected 1". The code in question is:
Dim rst As DAO.Recordset
Dim stTo As String 'one of the function's arguments received from the calling function.
Dim stToString As String 'the built up concatenated emails
Set rst = CurrentDb.OpenRecordset(stTo, dbOpenDynaset, dbSeeChanges)
[Code] ....
View 6 Replies
View Related
May 8, 2013
Basically what I would like to do is create a Combo Box with each month of the year available to select. When I click on a specific month, I want it to pop open a Report based on my table that is filtered by the month I selected. I have a Date column already created in my base table to be my filtering device.
I've already learned how to use query's and reports a bit. I have a Command Button on my form that launches a report based on a query that only shows data for the current year. Likewise, I created one that only shows data for things with a specific item code using a [Which Item Code?] criteria in my query. So in theory, I could do this by creating 12 different buttons, 12 different query's, and 12 different reports. That seems like overkill though and it would seem there has to be an easier way to do that simply by using a combo box to select the month you want to filter.
View 14 Replies
View Related
Oct 7, 2013
I have a booking sequence. Sales representatives take an order on a booking form and then then click a button to draw up the related report. The form is showing all Booking forms, not the specific one just taken.Do I need an OpenArgs statement? I've tried that but can't seem to get it to work.
View 10 Replies
View Related
Aug 26, 2013
I've got a code that allows me to select one or many names from a listbox on a form and return data relevant to the name(s) selected from a query. The following code is triggered by a button on the form...
Private Sub Toggle4_Click()
'Set it all up for CSM selection
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[code]....
(Toggle 10 goes to the code for the second listbox which has the same code with different tables refered to giving two selections in the query.)
What I want to do is replace the "warning if nothing found" with a code to show data against all the names in the list box if nothing is selected in the listbox.
View 13 Replies
View Related
May 2, 2014
I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.
End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.
View 6 Replies
View Related
Aug 4, 2014
I have a navigation form that will have 6-8 tabs. We were using about that many databases, but we are finally consolidating them into one. The result of us using so many databases has been the multitude of forms and reports that were necessary for each database prior to merging them together.
The problem: There will be anywhere from 12-20 (text boxes) that the user can use to search anything in our database. What we need to have happen, if possible, is for those search parameters to show up in the header of our report if they have text in them. If the text box is blank, it should not show up in the header of the report.
I have read how to to do the start/end date technique, but I do not know if that would work for what we are doing since the boxes would only show up if they are populated by the user.
View 4 Replies
View Related
Nov 30, 2006
hi everyone,
i have a query that is used to generate a report. the report is based on date so i enter the following into the date criteria
Between [Please enter the date you wish to start the report] And [Please enter the date you wish to end the report]
it works fine however the problem is that my date is set up as medium date format which means 01-01-06. if i type 01.01.06 then it returns NO results.
How can it be avoided so that you can type ANY format of date and it will return correct results.
thanks
View 9 Replies
View Related
Nov 23, 2013
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
View 4 Replies
View Related
Jun 29, 2006
Quick one for you geniuses out there!
I would like a command button to print records from a select query displaying dates for the past 2 days but not for todays date.
e.g. today is the 29th, I want to print records for the 27th & 28th.
Data is being recorded hourly and kept for 2 months so there will be new and old data that I don't want printed.
Thanks for the help!!
View 1 Replies
View Related
Jul 30, 2014
I have a database with a bunch of related tables. One holds information on (let's say) types of food. A field in that table tells whether the food is HOT or COLD. Foods are grouped by MEALS in a related table - the PK of the foods table is stored as an field in the MEALS table. What people here are looking for is a report that lists all the foods in each MEAL, the temperature of the food, and whether the meal is HOT, COLD, or MIXED - foods are both HOT and COLD. I've got a report that lists all the FOODs, grouped by MEALs - it's just the overall temperature of the MEAL that I am missing right now.
View 9 Replies
View Related
Dec 28, 2005
I am totally new to Access and this is my first database.
I have a database for volunteers in which one table is basically a calendar. In this table I have fields for the month, day of the week (i.e Monday) and day of the month (i.e 21st). There is also a filed called "Special days"
Sometimes I may want to produce a report that selects only certain days such as Saturday, Sunday and other days marked as "special days". Another time I may also want to produce a report that selects other days.
At the moment I have a "test filed" in which I place a 1 for those days i want to select then I choose all those with a 1. This is obviously a very poor construction.
Can anyone offer me a more advanced method?
View 1 Replies
View Related
Mar 5, 2008
I have a database which records time spent on various projects and I would like to be able to calculate the time spent on any particular project between two selected dates. The report and the query behind it already works to display the time accrued on all the dates of a project, but I want to be able to break it down to small ranges of dates
I have a form on which the user selects the start date and the end date. How can I apply this calculated information as a criteria in a query so that I can produce a report with the relevant information on it.
I already have the report and the date selection form designed. The dates selected go into two unbound fields which have a date format.
I hope someone can help me.
Rob
View 6 Replies
View Related
May 30, 2014
I have this code below which pulls a report based on the current date, I wanted to be able to pull the same report by entering between 2 dates as is done in a query using parameters.
Code:
reworkWhere = "ReworkTech = '" & Me.txt_tech_by_date_techid & "' And ReworkTimeOut = Date()"
repairWhere = "RepairTech = '" & Me.txt_tech_by_date_techid & "' And RepairTimeOut = Date()"
qcWhere = "QC_Tech = '" & Me.txt_tech_by_date_techid & "' And QC_TimeOut = Date()"
strWhere = reworkWhere & " Or " & repairWhere & " Or " & qcWhere
DoCmd.OpenReport "RPT_RF_TECH_REPORT_UNIT_DAILY", acViewReport, , strWhere
How to make a combo box with the months listed so they can pull this report by the month selected but is a side tangent.
View 3 Replies
View Related
Mar 2, 2005
Hello All,
How can I create reports in Access based on dynamic queries? I did a lot of search on this but couldn't find anything reasonable.
Any help to get me started will be extremely appreciated.
Thanks
View 1 Replies
View Related
Oct 19, 2006
This probably is a very stupid question but I am a new user and have been pulling my hair out for a week over this. I have created a report and linked it to my table but it generates a list of all of the values in my table on the report. What I want is a way to generate a report page for every row in my database table grouped on a key record that is unique to each data row. If anyone has any advice it will be much appreciated, thanks.
View 1 Replies
View Related
Aug 7, 2013
I want to know if it is possible to generate reports in writable PDF format? Also, is it possible to send the report automatically to a list of emails recorded in the Access db using Outlook?
View 1 Replies
View Related
Jun 1, 2013
I've got a simple invoice database with 10 amount fields, that needs to be summed up intoa Total including Gst box on a monthly report.
Report only has Date, Invoice Number And Total Amount fields on it, so I need to pull the information from table and sum it into Total Amount.
ie. = sum ( t1 +t2 + t3 + t4 + t5 + t6 + t7 + t8 + t9 + t10)
and sum above divided by 10% then added together to form total.
I'm just not sure how to do it, everything I've tried so far ain't worked.
Every example I've looked at is only doing maths with 1 field.
View 4 Replies
View Related
Apr 15, 2013
I have a report that is purely for points gained from products. Each product is split into 3 (e.g. Investment A, B + C) and there is a indicator that means the points gained can be added up (e.g. I for Investment and S for Savings).
I have made the report which is many unbound fields. There is a summary section for all points added together with fields Total Amount, Monthly Target, Quarterly Amount and Quarterly Target.
Then the report is split into each of the 4 products (Each of these have different amounts of points. Number indicates it):
Investments (10), Savings (15), Pensions (15) and Protection of Life Savings (20).
Each of these have 4 fields - Total Amount, Target Amount, Quarterly Amount and Quarterly Target.
I need a way to generate these point scores using the Product_Points field. I already have Quarterly Target and Target Amount because there is a set field called Points_Annual_Target.
EDIT: I also don't want it to come up with the 'insert parameters' so all the info is one page.
View 1 Replies
View Related
Jun 23, 2005
Dear All:
I have created a database to keep track of transcripts that are requested. This database has their names, ID number, date requested(With a pop-up calender), transcript type requested(This is a combobox where the choices are "Official Copy" and "Student Copy") and address.
So far, it works great. What I wish to do is run a report that I can choose the begining date and ending date for a specified month to see the total "Official Copies" and "Student Copies" for a given month.
Any ideas out there?
Hats off to Colm!
Regards,
Dion
View 4 Replies
View Related
Dec 11, 2013
I have a table containing a list of dates in "MMM YYYY" text format from "Jan 2010" to "Dec 2020".
I would like to restrict the list from the first record (Jan 2010) to the current month using today's date (eg in this case Dec 2013).
I know about
Code:
Format(Date(),"mmm yyyy")
And have tried the criteria
Code:
<Format(Date(),"mmm yyyy")
But doesn't work and haven't got much further....
View 6 Replies
View Related
Apr 18, 2013
PDF was generating and saving to the correct location, but when I open the PDF file ... it's blank =P am using access 2003 and acrobat standard 9
Code:
Private Sub cmdPDFByAssetNo_Click()
Dim MyFilter As String
Dim MyPath As String
Dim MyFilename As String
[code]...
View 2 Replies
View Related
Jul 31, 2013
I'm trying to select a range of relevant dates for an amortization calculation (see my earlier thread on this subject here), but I'm having a bit of trouble making the SQL work.
I have a table called "t_AllMonths" that has only one field: MonthStartDate which contains the first day of the month for a very wide range of months over something like a ten-year period. I'm calculating amort for assets which will be amortized for some subset of those months (defined by the asset's Amort Start Date and Amort End Date). Further complicating matters, the amortization may be suspended during certain "hiatus" periods when the asset it not planned to be in use, and may differ by which business units make use of the asset.
So, I have three tables.
Table: t_Assets
Fields: AssetID (autonumber; primary key), Asset_Name, Asset_Cost
Table: t_AllMonths
Fields: MonthStartDate
Table: t_AmortPeriods
Fields: AmortPeriodID, AssetID, Amt_Period_Num (which I don't expect to use in this), StartDate and EndDate
Right now, I'm just trying to pull the range of dates between the earliest amort start date and the latest amort end date. (Min of StartDate and Max of EndDate, respectively) for a given AssetID.
My sql looks like this:
SELECT t_AllMonths.MonthStartDate,
Min(t_AmortPeriods.StartDate) AS MinOfStartDate, Max(t_AmortPeriods.EndDate) AS MaxOfEndDate,
t_Assets.AssetID
FROM t_AllMonths,
t_Assets INNER JOIN t_AmortPeriods ON t_Assets.AssetID = t_AmortPeriods.AssetID
WHERE ((t_AllMonths.MonthStartDate) Between [MinOfStartDate] and [MaxOfEndDate]);
I keep getting an error message that reads "Run-Time Error 3122: You tried to execute a query that does not include the specified expression MonthStartDate as part of an aggregate function."
View 5 Replies
View Related
Sep 5, 2013
I have a large table with a number of fields. I have written the query that I want but can't quite work out how to get it to do the main thing I need. I have several fields that I need to generate in the report but what I want it based on is the field called Date Approved.
When the Date Approved has been Active for more than 4 weeks I want to pick it up in the report. I don't want to set a date to start from but pick up everything that has passed 4 weeks in "Date Approved".
View 1 Replies
View Related
May 12, 2015
I've seen this question asked in multiple places but do not understand the answers (yet). I haven't worked with the ribbon and XML before.
I'm able to turn off the navigation panel and the ribbon completely which gives the user a nice, empty screen. However, when reports are selected, they open up in Print Preview but the ribbon doesn't return with the Print Preview.
In short, how do I get the Print Preview ribbon to return when generating a report?
Access 2013.
View 2 Replies
View Related
Jul 24, 2014
how to generate a Report through "Form".I should be able to input the date ex: text box1= Start Date and text box2 should be End Date, by Clicking a button ...i.e Generate Report Button, a report should generate should be generated showing data in between the Start Date and End Date.
View 3 Replies
View Related
