Hi I could do with some advice on how to start the following and if best to use both excel and access to achieve it.
I want to enter a range of data when I receive a bill such as date, supplier, bill amount, description, quoted price, customer job and retail price. Once I enter this I want to be able to do the following,
1.Pick a customer job and date range and get a report for all the details of bills received in relation to that customer in that time so that I can send the customer a list of items they bought in that time period and what each item cost.
2.I want to be able to compare cost prices from different suppliers and print a list of all items which shows who the preferred supplier is for each item based on the cheapest.
3.The quoted price from suppliers should automatically appear when the description and supplier has been entered.
4.There needs to be some sort of warning if the quoted price doesn’t match the bill price
5.I need to be able to get a report which gives the details for any bill which was entered that was not bought from the preferred supplier.
Some advice on pointing me in the right direction to get started is what I need and would be greatly appreciated
so i have an interesting question and im hoping that someone can help on this one. i need to pull date from a specific table, no problem, that's written and working fine, next i need to be able to join the data from another table by a primary key, again no problem. third, i need to be able to select the date (using WHERE) for a specific date range. (i.e. i enter the date range of 01/7/2007 to 15/7/2007) and the query comes back only showing the data from that specific time, not the data from before or after. this is where my problem lies, all the entered data is being shown after entering my date range. i am going to include my SQL statement, just so you can actually see what im really talking about.
SELECT srealest.Name0, srealest.Dist1, SREpayments.Face2Pd, SREpayments.Penalty2Pd, SREpayments.[2paid], SREpayments.Face3Pd, SREpayments.Penalty3Pd, SREpayments.[3paid], SREpayments.Face4Pd, SREpayments.Penalty4Pd, SREpayments.[4paid], srealest.Map, srealest.Parcel, srealest.LeaseHold, srealest.TaxRebate1, srealest.TaxFace1, srealest.TaxPenalty1, srealest.TaxYear, srealest.BillNo, srealest.PdRebate1, srealest.PdFace1, srealest.PdPenalty1, srealest.DatePd FROM SREpayments INNER JOIN srealest ON SREpayments.BillNo=srealest.BillNo WHERE (((SREpayments.[2paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[3paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[4paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date])) Or (((srealest.DatePd) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date])) ORDER BY srealest.Name0;
any thoughts or ideas on how to accomplish this would be greatly appreciated!
I have multiple buildings that I own. Each building earns a monetary amount each day. Some days they earn $0, some days they earn $1,000. This is all kept track in a data base in which someone manually enters the information each day.The three fields are:
Building Date Profit
I have narrowed a query down to one building, and I am interested in two things. How do I write a query that shows a 30 day peak (the most profitable 30 days). In other words. I want to see the following Building: GNB Tower Date: 02/14/13 - 03/15/13 Profit: $25,162
The next thing I am interested in is a 7 day peak from within these 30 days. This shouldn't be too difficult if I can figure out how to query these 30 days, I can query 7 days out of those 30 days. So this bigger mind stumper is the first one.
out of a date range of months and months (Let's say 10/12/13 - 6-14-13).Once I figure this part out, I am sure I can figure out how to compile all buildings into one large report with their 7 day peak and 30 day peak.
I am trying to connect to excel from Access database. Once I make the connection I want to delete data from a range on a specific sheet. There are 4 columns on the spreadsheet but i wouldn't know how many rows. So for example, A150... but I may not know what the last row is. How would I be able to delete data from a range of columns to the last row?
This may be a bit detailed, so stick with me. Is there a way to have a form which you can pull tabel information into, but look at a specific line? I am trying to create a database that will pull up the first line of a specific tabel's information, then when a command button is pressed, it will pull up a seperate form with the information from line 2 of that SAME tabel. I don't want this to be done by clicking the arrows at the bottom of the form. I actually want this to populate seperately.
Lets say I have a Loc_ID box that is pulling the Loc_ID from a tabel. The tabel I am trying to pull from has an autonumber format and is sorted in that manor from a-z. Is there a certain type of logic that I should use however? As of now, each time I have a form come up, it starts at the first record, which is not what I want it to do. I want it to come up with the first record, then click a few buttons, then the next time a new form comes up with the same info on it, I want it to show the second record's information.
Any information anyone might have will be MOST helpfull! :D
I have many queries for separate types of income that when criteria is entered on the switchboard, a report is created for either a specific month or range of dates. This works fine. Now I need to create one report that shows all 7 types of income in one spot, but once again based on a specific month or range of dates. I have a query that produces the entire income for all dates, but can't get it narrowed down to the specific criteria.
Hi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example: if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007. In the criteria I have set "Date()" what else should I be adding to get the range mentioned above? Thanks
I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????
I am using Access 2007. This is the problem; I have a warehouse divided into four departments North, East, South, and West. Each department is assigned its own storage location range North is N1-N1000, East is E1-E1000, South is S1-S1000, and West is W1-W1000. On the access input form of my database are two fields, one combo box field for Department and one combo box field for location stored.
When the user is updating the data base for parts received or shipped, the user must enter the department and location stored to correctly debit or credit that department. The location stored entered must be assigned to the department. (Example: dept. is north and storage location is N65, the user enters D65 instead, error message is displayed, "you have entered the wrong location").
What I need is instructions how to write the code to check the fields to verify location stored matches department, and display a warning message. How do I do this? I have a table with department names and storage location ranges.
I have spent the day using Access 2010 and attempting to move information from a parameterized query into specific cells in an excel template. It runs smoothly until I attempt to reference the query at which point I run into th error "Too few parameters. Expected 1." Currently my reference code looks like this:
I want to make a delete query, which delete record between certain dates, I want access to ask user to specify range of date before executing the query.
I have a spreadsheet that my company uses that has about 20 clients presented in a single sheet in Excel so I was wondering if it was possible to display only a selected range (i.e. only one client) in a specific form in Access to cleanse this up a bit.
I am trying to calculate the total hobbs time (Ending Hobbs - Starting Hobbs = Total Hobbs) based on a user inputed date range. The query that I created (see attachment) doesn't seem to give me what I'm wanting.
I have a weekly list of transactions that come in the format DD/MM/YYYY HH:MM:SS, I need to tag these individual transactions with a week number. The problem is, I can't use the Datepart function etc. as the day is classed as running from 8am to 8am rather than midnight. I have a list of all of the weekly date ranges for a few years (with the time) so I was able to solve this problem in excel by using the Index and Match functions. However, I'm trying to automate this process as much as possible so I'd rather perform this function in Access.
Hi All I have a form built on query called Current Med. its have medications info for the people and we have situations where the med get discontined for some reasons. i would like to have the discontinued med info to put be into another form for discontinued meds automically but i do know how do that. Hope you get the picture. any help will be highly appreciated.
hi, i've been trying to find a solution to this problem but i can't seem to get my head around it. i have searched through the forums but found all the threads to be confusing although it probably is simple.
im a doing a project for a2 for a trailer tent company
got 2 tables where the problem lies in order stock
they only sell one trailer tent to a customer when a trailer tent is sold, i want to update no in stock in stock table i.e. trailer tent sold --> "no in stock"field for that particular trailer tent goes down by one. I would like the user to be able to change stock level any time as well so don't want it to be fully automated
sorry if i'm not making it clear, not really sure how to explain it
I need help on this, from what the best concept is, to what I need to look into using:
I store Quote data from phone calls into tblQuotes. There is a seperate table that holds much of the same information except that it is for actual orders called tblOrders.
As far as function goes, I have each working much the way I need it to except for one thing... If a sales person is on the phone with a customer with a quote already in the system, right now they re-enter the data into the Order table. Most times, the order is what was quoted, but maybe with a few small changes (so I will wnt to keep a historical record of the quote). How could I copy the contents of the quote recordset into the recordset for an order, where all the sales rep does from there is edit the quote to the actual order?
Would I use VBA or an update query that is executed via VAB? Honestly, I am unsure how to do this at all, I hope someone has seen this before and has a good suggestion...
Haya all, I’m new to access and I’m trying to create a database for my boss, but am a bit stuck, it’s a Bundy clock system in access, I have the tables set up (I think), and what I’m stuck on is building a form where, when I put in the employs ID and press enter there name appears underneath, can anyone point me in the right direction of a tute that would show me how to do this?
Thanks so much
The way I have the table set up is 3 fields, staff ID, first name, last name. All within one table
I think I’m in over my head… but you have to learn somehow :confused:
Is it possible to clear the cotents from various records but only the values in one column. Like let's say I just want the delete the values in the Price column for a range of about 6000 records. Not the whole records just those price values.
I can't seem to find a way to do this without sitting there and pushing down and backspace over and over again.
I am trying to simply find the sum of a range of data...I have tried putting the range into a the formula, and also creating aliases for the cells but it either doesn't work or I keep getting a name error in excel and I just can't seem to get the right code:
The range I am trying to sum is: Range(Range("B2"), Range("B2").End(xlDown)).Select
And I can find the cell that I want the sum to go into by: Range("B2").End(xlDown).Offset(1, 0).Select
As I said I have tried a few things but just get this right. Should I be using Value, Formula or FormulaR1C1?
Trying to create a simple data entry form to get information and populate fields from another table. i.e. type in info in one field and the other fields are displayed in the form with information from another table.
I am very new to access and have a question which I think is very easy to answer. What I have is an access file with a listing of companies, their contacts and what services we provide for them. (each company/client/service is listed in a row with each new set of information on the row below it).
What I am looking to do it to create a data access page that anyone in our office can view. I want the access page to have a text box where they can type in the name of the company, then click a 'search' button. That will then display the results in a box below everything. The results would be the contact and the services (there are other columns in the datasource as well, but I didn't list them).
If anyone can shed some light onto my problem it would be most appreciated!
