Is there a place I can insert a snippet of code to have all the forms come up full screen. Some users think it is annoying that they dont always come up maximized. Any help would be greatly appreciated!
View RepliesSee my 2 attachments. I put the Pop-Up property on the form. that worked but still not what I want.
On the HATT attachment do you see how it opens in the middle of the screen? And the other opens at the top right, (and has that tab at the top right that says frmMain)?
how do i made the airwatch open in the middle? like the other screenshot?
I have tried to make a login screen, I have also searched for information and tried some of the examples but, I just can't get one to work.
Is there someone or somewhere where I can get information on how to build one step by step in simple easy instructions....(access 2003).
Also, how do you get access to open all the windows, tables, queries etc in full screen mode.
I have expaneded them and shut it down and then reopened it but they still want to open out of full screen mode.
Thanks, everyone has been a great help in creating my first Access program.
I have a monthly system data report I wish to manipulate in Access.
I have created a table to match the 3 fields in the data report; the date, widget ID and number of widgets made.
Widgets are made every day (including weekends and bank holidays) but there will only be a data entry on days where the number of widgets made changes from the previous day ie if Widget ID 33 was made 5 times on 05 Oct, 06 Oct, 07 Oct but on 8 Oct there were 7 made, the data would look like…
Date.................Widget ID..................Number Made
05 Oct ..................33.............................. .5
08 Oct ..................33.............................. .7
I would like to write a query that shows the data for every day, duplicating the data for the previous day in the instance the same number is made. The output should look like..
Date.................Widget ID..................Number Made
05 Oct ..................33.............................. .5
06 Oct ..................33.............................. .5
07 Oct ..................33.............................. .5
08 Oct ..................33.............................. .7
The data is monthly. There are so many different widgets on the report that it’s pretty much guaranteed there will be at least one entry on the first date and the last date in order for a query to find the full date range – as opposed to a user having to manually enter the date range.
Using the example above where the first entry is on 05 Oct it should not be assumed that 01-04 Oct was zero, the query should then look for last entry in the previous month’s data stored in the database (I realise the first time I do this some form of manual adjustment would have to be made as no previous data would exist).
Hi,
I searched in this form and on the internet on how to display a form in Full screen; however, I could not find an answer that worked.
Does anyone knows how to display forms full screen please?
Thank you,
B
How do I achieve a full screen switchboard display so that the only way to access the (table, query, form...) is by holding the shift button while clicking on the file icon. Thanks!
View 1 Replies View Relatedis it possible to make the menu-toolbar go away?
and can you put you access on full screen?
if yes, how?
thx in advance
My form which is based on a table carrying same name doesn't append the full length of the text to one of the fields.
I don't know where the mistake is occurring or indeed I don't know if the error is in the table or in the form.
The form is showing full length of the text but when I look it in the table, it has just one or two bits of the full length.
I have set the switchboard to maximise when opened, when I open any form fand then close it the switch board will not return at full screen, How can I have it maximise every time a form is closed!!!
View 2 Replies View RelatedI had the Main Menu open when clicked on access file. I put a autoexc.bat file somewhere. Where? Also how do I get a form to open in full screen again?
View 3 Replies View RelatedHey.
My database would like, to make itself feel complete, a rele snazzy opening form.
I have flash 8 and I've created a 1024x768 movie with some simple animation on it.
I've managed to add the movie to the database as a ActiveX flash object and the animations play.
The problem is making the object larger! It's staying very small no matter how I change the properties of the control.
Any help would be much appreciated. For the sake of my databases mental health... of course. :cool:
To attach the movie I did so:
http://www.databasedev.co.uk/flash_movie.html
JoeyTheBean
Apologies if I am covering old ground here but unfortunately I cannot find a suitable solution after searching the forum.
Basically my switchboard on Open includes DoCmd.Maximize so that the switchboard does indeed open on full screen. However, say I then leave my database open and work on a different application on my PC then when I click on my database on the taskbar then the form is not longer full screen.
So what I am basically asking is, is there a way of 'locking' it to appear full screen even if I flick between applications on my PC?
Many thanks in advance,
Paul.
I must be missing something simple here.
The opening switchboard of my db is set to popup but on opening the db it is showing full screen. On reopening once closed it pops up. How can I make it popup to start with?
Settings are:
Default View - Single Form
Auto Centre - Yes
Auto Resize - No
Border Style - Dialog
I have a subform 2SiteList (Datasheet View) with the field SiteName... i also have another form SiteDetails.
if possible i would like to be able to double click on a SiteName on the subform and have the SiteDetails form to open to show the full details.
Hi there,
Is there a way to hide the application title bar (including the min, max and close buttons) as well as the windows taskbar when Access is running? I have seen this done before where the form fills the entire screen - ie no controls or frames are visible.
Does anyone have any suggestions????
Thanks,
Glenn
I just imported all of my objects (tables, forms, etc.) into a brand new database file and all of my forms are now full screen instead of the size I set them to in design. What caused this? I can't get them back to their normal size.
I am using Access 2007 but imported files into 2003 .mdb file.
Form View
Design View
How it should look?
Hello all,
I have this splash screen, which welcomes all the users. It has an OK command button that exits the screen, and a checkbox that says "Do not show this screen again". I still do not have the code behind the checkbox. Thus I was wondering if there is a way where I could entirelly close or "get rid" of the splash screen until the user loggs in again. Because right now there is no code behind it, so everybody that checks it and click OK, leaves the screen. But they can still open it, if they select the "splash form".
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies View RelatedWe have a button running a SQL query via VBA, how can I make it so the results doesn't show up in a table/preview?Also, I know it's for the SQL forum but how can I make a text box to show the results of a query to display it on screen?
View 8 Replies View RelatedI have a query joining two tables. TableInvoice in the query is Product number and Date purchased. TablePrices contains the same fields and contains prices (quarterly) over the past five years.
Joined by PONumber, I want the query to find the price charged for that date. Right now, if the Product number (TableInvoice) is not listed in TablePrices, it won't show. So, 100 Records might return only 80 if TablePrices does not have all of the Product numbers.
Is there a better way to return all 100 records in TableInvoice and show (Blank) price data if the item is not in TablePrices?
I have 3 tables;
tblEmployees - Stores employee data
tblProcess - Stores process data
tblTraining - Stores data on which employees have trained on which process
tblEmployees has a 1 to many relationship to tblTraining through empID
tblProcess has a 1 to many relationship to tblTraining through pcsID
When a new Process is added, a query auto populates tblTraining with 1 record for each employee in tblEmployees. Equally when a new Employee is added, a query auto populates tblTraining with 1 record for each Process in tblProcess.
In theory this should ensure that every employee has a training record for every process (and vice versa). However, as many of us know, never assume the user wont find a way to mess things up!
So i want to have a query that can show me Employee and Process without a training record. I have been manipulating a SELECT (SELECT) query to pull this together, but i just keep coming up blank.
I have attached a copy of the relevant tables and query. I have deliberately deleted a training record for empID 6 on pcsID 1 AND empID102 on pcsID 2 (qryCheckTrainingRecordsBalance will show the processes these 2 DO have a training record for).
Model Full Name: "Jones, John P." (this was the one not in MS' examples)
Last Name Extract = Jones
lastN = IIf(InStr(1,[Model Full Name],",")=0,"",right([Model Full Name],len([Model Full Name] - (InStr(1,[Model Full Name],",")+2)))First Name Extract = John
firstN = IIf((InStr(1,[Model Full Name],",")+1)=InStrRev([Model Full Name]," "),Right([Model Full Name],Len([Model Full Name])-(InStr(1,[Model Full Name],",")+1)),Mid([Model Full Name],(InStr(1,[Model Full Name],",")+2),(InStrRev([Model Full Name]," ")-1)-(InStr(1,[Model Full Name],","))))
I have a table of sales information. Part of my products are kits that are a combination of individual products. (Think of it as a value meal at a fast food restaurant. You can order a hamburger, a soda, and a small french fry separately. But if you get the Value Meal #1 you get all three at a discounted price.)
What I would like to do is make a new table/query that extracts out the kits out of the original sales table and replaces the kit record with records that show the components.
I have attached a file to show as an example of how the records current look and how I would like it to look.
I would like to create a full outer join in Access2010 between two tables with many to many relationship.
So I have tblServer and tblApplication and there is also the ServerID-ApplicationID table that connects these tables.
I found online many examples but all of them where for two tables with one-to-many relationship.
I have a .mdb file (access 2003) which has ballooned in size to 1.2GB and I'm not sure why. I tried deleting some older tables (which were copies and had about 38,000 rows each) but it hasn't made a dent. Is there a way to show all the database elements tables, forms, macros, modules etc and list their sizes so I can see what has caused the size to increase?
There are 3 tables linked via ODBC which have tens of thousands of rows but as these are linked I wouldn't have thought they would have increased the size at all?
Hi everyone,
I was trying out the options on the startup item of the tools item on the menu bar and my access window has gone except the following menu items: File,Window and Help.
Can someone kindly show me how to bring back these seemingly lost items?
Thank you for your willingness to help me out!