I have been playing with the sample DB alastair69 donated in the sample db section of the site. "The nice timer function".
If you don’t start the timer right away you don’t have the correct time.
I haven’t figured out how to add a reset type of button to display the most current time in the start time field. Can any one help me out please?
Looking to create two command buttons or two keystrokes sets in an Access 2007 form that will allow me to place a current date and time in any allowable field where the Cursor is presently placed. Similar to what was in Access 2000, ctl: (for the current date) and ctl shift : (for the current time).
View 2 Replies View RelatedI have two fields in my form contained Start time and End time. Currently, Both fields using default Time$() on form. However, End time always wrong because until we get our job done, It took atleast 20 or 30 minutes more than current default time. My question is, is there any way I can setup the End time to just click on it, and a new current default time populated?
Thanks in advance..
I am trying to query my records by the current records selected date then send the results in the body of an email on click. I believe I am close but I think there is a problem with the date format because I am getting 3421 Data type conversion error. Here is what I have:
Code:
Private Sub eMail_Click()
On Error GoTo EH
Dim dbExceptions As Database
Dim rstExceptions As Recordset
Dim dbDate As Database
Dim rstDate As Recordset
[code]...
I have a button which runs a list of queries that take roughly 10 seconds to run, when another user clicks the button while the other one is running it gives and error message 3405, File already in use.
View 1 Replies View RelatedI have created a button to display the current time ( sign in and out).
It works fine with this code Me.field = time$
However i need a code beneath it to run the actual query that will display this time onto the table...
I have attached an image of one of the query, I need it to run.
Getting better - but still far from being competent with VB can someone please help me with the following code.
On the On Click event of a command button I want to call up a field (from another table/form) and add A to it so it lands in a text box. So using the following example -
The table/form is called Patient and the field in question is URNumber. The form I want to put the command button is called RelatedDetails, and in a text box (IDNo) I want to put code that creatsed URNumber with an A on the end (or the beginning) Any ideas?
I have a form with date/time field. I have the default value at =Now(). My problem is I would like for this particular field to stay with the current date/time all the time. I mean if I created a form last week with the date/time of 3/14/2005 12:54:34 PM and go back to the same form to edit something this week I would like for that particular date/time to be the current date/time and not the date/time from the week and time the original form was created.
Thanks for any help!
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
What code would I use and how would I insert it into my Code to make a button on a form fill in the current date into [fieldname]???
I think I already know who is going to respond to this! ;)
Thanks! :D
How can i put a fixed time for the current date in a text field.
So the field will be 06:00:00 for the current day when the form is open?
I am trying to figure out to have the current date populate in table field by using a button on a form and not having much luck.
I have a table with 2 date fields, a 'created' field and a 'received' field. I already have the date set to auto populate for the 'created' field but I don't want the 'received' field to populate until the employee has gone into the database to receive the work.
I know I could have the employee just enter the date, but i want to avoid any typos or people simply forgetting to do it.
Ideally I would love the button to enter the current date into the 'received' field and save the entry, but I fine it needs to be 2 seperate buttons.
All, using access 2010. How do I display the default value of a date/time field to just the current year instead of using =date() to get the full date.
View 5 Replies View RelatedHow do I input a value in multiple field boxes one at time using one button at click?
I am not able to code it to recognize an empty field box.
Hi. I have two forms that both look at the same table. One form is for inputting data and the second for is for closing the job. I want to create a button that when clicked automatically changes a field on the input form and also fills in the current date on a field displayed on the closeout form. I then want it exit my two forms and take me back to my switchboard. Can anyone out there help?..Thanks.
View 6 Replies View RelatedI want to be able to put a barcode in a field that when a reader scans the barcode it records the current time. Need it for access control to record who is in and out of the office. Reading other threads I understand it may be possible in Dlookup.
View 3 Replies View RelatedI am trying to double click on a subform field called Address which would open a form frmEditWorkItem (based on a query qryWorkItem) then to be able to carry out edits for the current record.
This is my code line:
DoCmd.OpenForm "frmEditWorkItem", acFormAdd, acDialog, "ADDRESS = '" & Me.ADDRESS & "'"
This line does open the form but shows ALL records in the table instead of the current one that I have clicked in.
I need a Select Query to display data on a form. When an order is appended to my table the field named Printed is updated with the time it was appended. When my form opens it needs to display the field Printed and a field I call MinutesFromPrint. This field needs to display the total minutes elapsed from the time in the Printed field to the current time. My expression is not working.
MinutesFromPrint: DateDiff("n",[Printed],Now())
Here are a couple of samples of my results when I run the query at 7:49 A.M.:
Printed MinutesFromPrint
2:35 60366554
5:07 60366402
Ok if I sound like I do not know what I am talking about, that would be correct. That is why I am asking here.
So I have this form called frm_UserMaintenance
On The form I have a button
I would like to have an OnClick event that will activate one of the dialogue boxes on the tools menu.
Heres the catch. The menu is not visible and i do not want to make it visible. This makes using sendkeys a non option.
Any ideas????
I have a form on which I have a button that I want the user to click after a cetrain field on that form is updated.
I display a little pop-up box saying to make sure that a user clicks on that button.
Is there a way to know that this button was clicked? Is there a way to not proceed with anything else until that button is actually clicked?
Thanks.
Hi,
I have a form with a number of drop-down lists on it and each of these lists is bound to a field in a table.
When I return the results of a search to this form I want to allow users to be able to cycle through the records and change them if they want. However, the changes should only be saved if the user clicks on the "update record button". This button is simply the save record button by the MS Access wizard.
At the moment if they change the value in one of the drop down lists and move onto the next record the change is saved even though the user doesn't click any button. I want to prevent this from happening.
Any ideas on how I might achieve this?
If I prevent "AllowEdits" in the form properties I can't update the form using the "update record button" either.
Many Thanks,
Afternoon people,
Just a query (no pun intended). Is there a way to ping an ip address which is taken from a table and at the click of a button it pings? Bringing up the cmd app to show the results.
Cheers,
Storm1976
I currently have a form with a button that once clicked displays a word document,however I have to double click on the button even though the code is on the single click event property.The only line of code is as follows
OLEFile.Action = acOLEActivate
Does any body know how I can get the single click to work ?
Hi all....
I have a list box that I can select mulitple items from - I then click a search button and it runs a query that finds what I am looking for from a table and then displays the results in a subform.
In the subform I can input weights and get a percent....anyhow.
How do I set up a button so that it will print out a report or the report from the subform information that is currently being viewed.
Also, I can already do this by clicking a button on the form and pulling up the installed report program but, you need to input data to get this report.
I kinda want this button to be a "I need it now" type of print option.
Thanks...as always my questions are probably confusing...:D
I was wondering if there is any way to control a user's input in to a form such that data entry does not automatically create a new record. Is there any way to collect all inputs in the text/combo boxes and create the new record only when a button is clicked? Cheers, David.
View 1 Replies View RelatedHi all!
I have this command button whose caption switches from update record to save record with a msgbox verifying if the person really wants to take this action. On click the user is then allowed to update the record then in theory they would be able to hit the same button whose caption now reads save record, the msg box would appear with a yes or no answer required. The code I have is putting the msg box after the user clicks the update button.
Anyhelp and/or suggestions would be most appreciated!
Private Sub cmdOpen3_Click()
stDocName = "frmSearch"
If cmdOpen3.Caption = "&Update Record" Then
If IsNull(Me.FTMSubform.SourceObject) = False Then
Me.FTMSubform.SourceObject = "frmFTMInfo"
Me.FTMSubform.Form!txtFirstName.Enabled = True
Me.FTMSubform.Form!txtFirstName.Locked = False
Me.FTMSubform.Form!txtFirstName.BackStyle = 1
Me.cmdOpen3.Enabled = True
Me.cmdOpen3.Caption = "&Save Record"
Me.cmdOpen4.Enabled = False
Me.cmdOpen4.Caption = "&Update Record"
Else
Me.FTMSubform.Form!txtFirstName.Enabled = False
Me.FTMSubform.Form!txtFirstName.Locked = True
Me.FTMSubform.Form!txtFirstName.BackStyle = 0
Me.cmdOpen3.Enabled = False
Me.cmdOpen3.Caption = "&Save Record"
Me.cmdOpen4.Enabled = True
Me.cmdOpen4.Caption = "&Update Record"
End If
End If
If cmdOpen3.Caption = "&Save Record" Then
If IsNull(Me.FTMSubform.SourceObject) = False Then
Me.FTMSubform.SourceObject = "frmFTMInfo"
If MsgBox("Save update to this individual?", vbQuestion + vbYesNo, "Save Update?") = vbYes Then
DoCmd.Save
DoCmd.Close acForm, "frmFTM"
DoCmd.OpenForm stDocName
Else
MsgBox "Return to the FTMInfo Form!", vbInformation, "Save Function Aborted!"
End If
End If
End If
End Sub
~Van