Go To Next Page Command For Tab Control?
Oct 17, 2006Hello,
Is there a way to program a Next Page button for a tab control that can be put in the form's header and that'll go to the next page, regardless of what page I am on?
Thanks.
Hello,
Is there a way to program a Next Page button for a tab control that can be put in the form's header and that'll go to the next page, regardless of what page I am on?
Thanks.
Hello,
I would like to make a comand button in my form that will open a specific web page.
Can some one Help Me Please?
I want to put command buttons in the Page Header, however the page header is not visible from form view?
What is the purpose of Page headers?
Is it possible to have a button that appears only on the last page of a form showing a number of records?
If so how is it achieved?
Hi folks,
I've searched through the forums and found a little on tab controls, but haven't been able to figure out what I am trying to do.
I have a form with mutliple tabs, each of which contains a subform related to the form on the first tab.
When I am scrolling through the records, I might select the fourth or fifth tab to view that subform, and then, when I scroll to the next record (using the nav bar) I want to stay on that tab... but so far, my form always defaults back to the first tab.
Any suggestions on how I can keep the form open on the tab that has the focus would be a great help. Thanking all readers in advance....
Don
Hi,
I have created a form with a tab control covering most of it and have about 7 pages set up. I am finding that when I load the form it automatically scrolls down and cuts off the actual tabs at the top.
I have tried moving the control further down the page but it just scrolls further, and I have attempted to make all text fields etc non-tab stops but it still skips to the top.
Any ideas?
I haven't used access before and have been set the task to create a data of photos. The table is called 'Find a Photo' and contains 6 catergories of various information including river, site and date. I would like to create a search/command button by which i can type the river, site and date into seperate text boxes and search all of them at the same time.I don't know how to connect a command button to command button and not sure if any macros/queries are needed. Hope all this aint to hard to do.
View 1 Replies View RelatedHi -
I have a form that is multi-page. On the third page of that form, I tried to set up a tab control that allows me to natvigate among three subforms. The problem is that the moment I click a tab (which is on the third page of the multi-page form), the form automatically jumps back to the first page.
Is it possible I can fix it so that when I use the tab control on the third page on a multi-page form, I will not get bounced back to the first page? Although this sounds simple, I cannot figure it out.
Thanks
tm
I'm wondering if there was a way to put a button on my first tab that, when pressed, will take me to the second tab.
Thank you.
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
If there a way to set focus to a specific page from a command button on a Tab Control?
I tried Me.TabCtl0.Value = 3.
But it doesn't work.
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies View RelatedI have a form with a tab control and an option group (frame). When I built the layout of the contents of the first tab, the frame responded properly to click events. Now that I have copied them onto the tab control, the events seem to disappear.
(When I check the events for the controls, they are all still there, and selected by the Properties table).
I know it's probably one of the "doesn't use Access very much, does he" type of situations, so how to get these controls working again!
Here is the Form Code listing.
Option Compare Database
Option Explicit
Sub SetSourceDescription()
If Me.frRunMode.Value = 0 Then
Me.lblSourceType.Caption = "Source for this run will be the Extract .pst file(s)"
[Code]...
Is it possible to use a formula in the Caption property of a page in a tab control (i.e. to make it dynamic)
I have a number of tabs each with their own subform (with each subform driven by its own unique query)
I'd like the tab name to include the number of records returned by that query (so as records are added, the tab name is automatically updated with the new number)
So something along the lines of :
Page 1 (" & DCount("[ID]","[qryQuery1]") & ")"
Such that the page name appears as :
Page 1 (7)
I know I can code this programmatically but then that code has to be triggered by some event and I need the counts to be as real-time as feasibly possible rather than requiring the user to click on a control to trigger it. I was hoping by using a formula directly in the Caption property of the page, it would be dynamically updated every time a new record was added without the need to trigger an event first.
Dont be overwhelmed by the following, but it may require some extensive thought and I dont expect everyone to understand....
I want to have a unbound form control a subform. On the form I have an unbound text area entitled txtDate. In this area it displays the current date being viewed. I have put left and right buttons on the main form that will add (+1) one day to the date being shown and subtract (-1) one day from the date being shown. I want to conrol it though the "On Click" but I dont know what to enter in the "On Click" field that will allow me this. The reason is, co-insiding with the previous, when the date is changed, the subform is also changed to a new day. Therefore instead of displaying 24 hours of today, you can view 24 hours of yesterday, tomorrow and so on. See, if one is to set the onclick to be: Me.txtDate=Me.txtDate-1, or Me.txtDate=Me.txtDate+1, it calls for a custom macro and I dont know why. I know it somehow resides in some similar command set up.
I also need to know how to make the subform bound but continous, and what exactly does that mean?
Anyone care to offer some assistance? :confused:
Hi all,
I am wandering if someone can help me out on this i have a thermal printer with it you get some ative x components to control the printer like for example what i am tryin to do is kick the cashdrawer which is connected to the printer,
Now the activex button does work correctly when click but i have another command button which prints out a couple of pages odf information so what i am tryin to do is have abother cmmand button when clicked run the code and then calls or runs the active x button to open the drawer is there a way i can do is i tried using the call statement with the name of the activex but with no luck.
i would really appreciate it if someone can help me out on this. thanks.
Regards
Naym
I would like to turn the tab style to none and select the tab pages with a
command button instead is this possible.
Thanks
i have some command button and some combo box on my form and also a subform. the subform contains some field. the fields used to enter numeric values.
i need to disable my command button on the form based on the subform fields if they r null.
Form 1: I have a combo box on my main menu(MenuMainF) called cboCompanyType with typical values 1,2,3,4,5,etc......
Form 2: I have a command button on my administration menu(MenuAdminF) called cmdDevelopment
My goal is to have the cmdDevelopment button of Form 2 be visible if cboCompanyType on Form 1 is equal to 1,2,3, or 4, but if it is any other value, then cmdDevelopment should be not visible.
I have a search from that has an option group, text fields, and a checkbox where the users selects a variety of option that generates a query. If the query return at least on record a split form (form on top/datasheet on bottom) is displayed and the form has an Edit and Close button. If the query returns no records the form is still displayed except the buttons are not visible.
If I knew the result of the query and then made a decision whether to open the form or release control back to the search box that would be great. To open the form I am using VBA with the DoCmd.OpenForm(,,"MyQuery","criteria") command.I thought about using the DLookup command and evaluate the return value for null to be used to control the program flow.
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View Related