I have a table which lists rentals, all have start/end dates and a rental fee p.a.
I want to query this table to show rentals that are effective for any part of 2 dates, [Enter Start Date] and [Enter End Date]. The purpose of this query is to calculate rental income between these 2 selected dates.
Now I have this much working, but I want to group all the figures by month, in order to produce a graph to view the rental income by months.... this bit has me stuck....:confused:
How can I group all these records, when I only have 2 dates... for eg, start 01-01-06 and end 31-07-06...
I want to see figures for Jan06, Feb06, Mar06...July06etc... rather than just a single total figure for the entire period...
Any ideas?
Help! I'm completely stuck here and have spent hours searching the internet but haven't found anything suitable...
I have a Date of Birth field in format DD/MM/YYYY and wish to set up 2 new fields one that calculates Age in Years and another that calculates Age in Months.
I'm trying to breakdown a date into years, months, and days. Simple right?
The code I've been using for months returns a negative month if it happens to be the next month. Instead of returning 1 Year, 1 Month, 23 Days, it will instead return 1 Year, -1 Month, 23 Days.
I tried to create search Form in access and after trying for while I finally made it. I have drug down the "query" to the design view of "Form Search" and added up there. Now using "STD" and "TELENO" I can search for these 3 coloumns. My main table is "Example"
Now as you can see in my attached screen shot Column "Recieved Time- less than 3 month" I would like to do that in Access. I would like to create something that will autometically calculte(Substract) the date from "Order Date to Today's date and will give me a result= "Less than 3 months or Greater or less than 4 months etc". I mean it will always substract from "Order Date" to "Todays Date". I have tried with some macro as well but it did not show up "Todays date"
I tried several ways to do it, even tried to input another coloumn(Using formula) in "Query" table but failed to do so.
Im in need of some help with a query that i am trying to set up. I have a table with data shown roughly below. And need to extract the average [call length] for each heading of [Call type] on a given date.
Ie. The query will be run and the date can be inputted. It would the display each category only once and the average of that category.
Find the difference between two dates is simple if you're simply looking for the number of days between them. However, if you're looking to express the difference in a bit more user-friendly way, you can use the following code to calculate the difference in years, months, and days. The code accounts for zero values, plurals and the Oxford comma. Further, it automatically sets the later of the two dates to the End date, so the dates can be used interchangeably.
Examples: June 4, 2010, July 3, 2012 returns "2 Years and 29 Days" June 4, 2010, July 5, 2011 returns "1 Year, 1 Month and 1 Day" June 4, 2010, June 5, 2010 returns "1 Day"
Code: Function DiffOfTwoDates(dtmDate1 As Date, dtmDate2 As Date) As String ' Written by Will Knapp, Freelance Access Developer, 2013 Dim dtmStart As Date, dtmEnd As Date Dim strDiff As String ' Resulting String Dim yDiff As Integer ' Year Difference Dim mDiff As Integer ' Month Difference Dim dDiff As Integer ' Day Difference Dim CommaLoc As Integer
Not sure if this is actually done with a query (hell, im not sure if it can be done) as my Access knowledge is limited but I've got a list of Patient Appointment Dates and I need to calculate a list of 'Next Appointment' dates that are six months on from the appointment dates not including saturdays and sundays (as the health center is closed those days)
BTW this is for coursework, I don't really work for a health center :S
edit: I seem to have put this in the tables forum, not the queries forum. Apologies for that, I'm not an Idiot, Honest!
I currently have a form where users can enter an "End Date", click a button, and it queries the data from 12 months prior to "End Date" entered.
Is there a way to force the query to show all 12 months, even if there are no records for a particular month? For example: if the user enters February 2013 in the date field, I would like the query to return:
March 2012 April 2012 May 2012 June 2012 July 2012 August 2012 September 2012 October 2012 November 2012 December 2012 January 2013 February 2013
...so even if June 2012 has no records, it is included in the query with a value of zero.
This is what I have so far:
WHERE (((Qry_Tbl_Assets.Dte) Between DateAdd("m",-12,[Forms]![Main_screen]![End_Date]) And [Forms]![Main_screen]![End_Date]))
I'm a bit confused with date codes. What I'm try to complish here is that how to add years and months from separate fields to text box, where's difference between two dates as an years and months? So basicly first I read year and month values from text boxes to a integer and then I'm going to add them to somewhere at last, but I'll get like 1 year and 14 months for result so, could you hit me with some tips or tricks what I should try out. I'll approciate your time to help me out with this and thanks for advance. =P
Hi, I am trying to create a query that will show data in a rolling four month period. Example: For September, show June through September; for October, show July through October. I am using a general date format in the field. I can use >DATE() - 120 to get a 120 day period, but that obviously does not give me data for the actual Calendar dates. Is there a better way?
Any and all suggestions will be greatly appreciated. Thanks in advance, Jake
I have a single $ amount and an effective date. I need to take that dollar amount and disperse it out evenly over 12 months. Is it possible to create a query that will create the fields 1/1/2006, 2/1/2006 and enter those amounts?
For example, total savings is $12k and effective date is 2/1/2006. I need to show $1k in each month field in my query from 2/1/2006 through the month of 1/1/2007. I've tried DateSerial and some other methods but I can only get it to give me the divided amount in the effective date column and nothing else. Is DateSerial the way to go?
The table I want to run the query on has a date in the format of dd/mm/yyyy. I want to be able to run a query so that the user can type in a month and all records with dates in that month will be shown.
I have done this before many years ago but now have a mental block and cant figure it out.
Searched and can't find the specific answer to my age/month question so I hope you will bear with me.
on my form I need to calculate someones age and show it in years & months, then display the age (years & months) in the format 7.5 ( i.e. 7 years 6 months displays as 7.5 ).
I also need to round that figure down to the nearest 0.5 of a year so 7.4 would display as 7 and 7.9 would display as 7.5.
Any help would be very gratefully received. Cheers RussG
1) I am trying to use the same set of data for different months. I will try to explain...For each month I want to mark the data as "Statement Received" and "Statement Reconciled". I don't want to create a brand new database every month with the same data. The database will become massive too quickly. Is there any way that I can set the date by using the filter date combo box I have created on the frm_SearchMulti form and having a fresh set of data for just April. When May comes around I can create a new date and have a fresh set of data, but still reference April data... I hope I am explaining this okay
2) Would it be possible to add a column into the "SearchResults" ListBox for Statement Received and Statement reconciled? I would want to update it through the text boxes I made directly above it. The buttons right now do not do anything... they are just there for formatting purposes. I want want to be able to select multiple record in the listbox and update them all simultaneously
3) How can I make the "New Account" button actually pull up a new account?
I need to (accurately) calculate a rental period to fractions of a month. ie) 1/1/2006 to 2/14/2006 would equal 1.5 months. DateDiff("m",[Start],[End]) returns whole months. DateDiff("d",[Start],[End])/30 is very close , but not precise.
Is there a way to accurately calculate fractions of a month?
Is there something I can put into the criteria of a date box to only use the last 6 months. I dont want have have to do this type of criteria: >12/1/2004. I want it to just use information from the last 6 months no matter what the current month is. If anyone knows what I am trying to say, please help me out! Thanks
I found the following code on this site in a search for a method to subtract two dates ie [Startdate] and [EndDate] and display the result as a whole number. ie 2, 6 etc. This code finds the difference but displays the results as 1 year 5 months 2 days, where I need the equivalent as 17. Can this code be modified to produce the desired result and if so how would I go about it. Thanks for the help.
Option Compare Database Option Explicit
Public Function getTimeElapsed(StartDate, Optional EndDate As Date) As String On Error GoTo Err_Handler
If IsNull(StartDate) Then getTimeElapsed = "No startdate" Exit Function End If
Dim YY As Integer Dim MM As Integer Dim DD As Long
' use current day if EndDate is not supplied, ' + 1 makes both days inclusive. EndDate = IIf(EndDate = 0, Date, EndDate) + 1
MM = DateDiff("m", StartDate, EndDate) DD = DateDiff("d", DateAdd("m", MM, StartDate), EndDate)
' recalculate if DD is negative. If DD < 0 Then MM = MM - 1 DD = DateDiff("d", DateAdd("m", MM, StartDate), EndDate) End If
YY = MM 12 ' integer division. MM = MM Mod 12 ' remainder.
getTimeElapsed = YY & IIf(YY < 2, " year ", " years ") & _ MM & IIf(MM < 2, " month ", " months ") & _ DD & IIf(DD < 2, " day", " days") Exit Function
I have been through this board looking for an answer, I've come close but not quite getting it.:confused:
I (obviously) need to count how many records each user has completed (easy)
I need to count how many they did in a months time. I need to report multiple months in one report.
A little back ground on me...I only know the Query Design view and it's pretty limited. I have tried to move into the SQL view and alter the information there but it's not working in my favor. I also tried changing the format in the date properties to mm/yy but it's still sorting by the full date and time. :mad:
Any help would be awesome. Here's a copy of the SQL statement if it's easier to just change it there. Thanks in advance for the help.
SELECT Count(qry_QuotesIssued.Quote_Number) AS CountOfQuote_Number, qry_QuotesIssued.FName, qry_QuotesIssued.Creation_Date FROM qry_QuotesIssued GROUP BY qry_QuotesIssued.FName, qry_QuotesIssued.Creation_Date;
