Here is my problem. We stage outages once 3 tickets have been recieved for the same problem type, but only if all three tickets are entered within 16.65 hours or 999 minutes. I.E. the third ticket is received within 999 minutes of the first ticket. How can I capture this based on the field time entered?
:confused:
I am trying to group time entries so that I can say, between 8AM and 10AM there were this number of calls. I have a field called Time_Assigned with numberous time entries (such as 08:15:33 AM) corresponding to another field called Incident_Type (such as medical). The data spans a whole year so I have several thousand time entries and I would like to show how many incident types occur between such and such hours. Thanks again for everyone's generous help.
View 2 Replies View RelatedI want to disable in VBA (.enabled = false) a lot of controlls, depending of some conditions. Is it possible to group (and having an unique name)these controlls to disable them all together at the same time.
View 10 Replies View RelatedI am creating my first database and I'm a beginner. I have a table called customers and another table that has customer and product information. What I would like to do is when a new record for my product is entered it also enters the customer information on another table. I have repeat customers though, so I only want it to enter it once. Right now, I have to enter the customer info separately. Customer table contains: Customer ID, first, last, Phone. My product table also has this same info. Is this possible? To enter info on a product form and the selected info be copied into another table at the same time only once.
Please help.
Biz
I have a form where I am capturing StartTime and EndTime of certain events. I have set the input mask as 99:00 >LL;0;_
My users think it is too much to enter am or pm. What they want is the system to calculate the am pm based on the time entered.
If the time entered is between 8:00 to 11:59, the system should save it as 11:59 am and if the time entered is between 12:00 to 7.00, the system should save it as 7.00 pm.
How can I make this happen.
I am trying to add the current date and time into separate fields after an ID is entered.
Code:
Option Compare Database
Private Sub ID_AfterUpdate()
Me.Date_Received = Date()
Me.Time_Received = Format(Now(), "hh:mm AMPM")
End Sub
Here is what I am trying to do. I have a query with 2 fields. "Time In" & "Time Out". What I would like to happen is this. Whenever a character, let's say a "t", is entered into that field I would like the current time to populate that field. Right now we are actually typing in the time. I have the fields set up as DateTime fields currently.
View 10 Replies View RelatedI am fairly new to access but so far I have been able to get what i need from it, until now. I am trying to find a way of comparing two sets of data to find out an employee's average productivty.
Table 1 -Hours Worked (by day)
- contains 'name' 'date' and '# of hours' worked
- an employee would enter the hours here on a daily basis
Table 2 - Contracts Keyed (by month)
- contains the number of contracts worked that is derived from seperate system
- this is entered on a monthly basis (so for example: John keyed 30 contracts for the month of January)
- the system i am pulling this info from does not have the ability to pull a daily count of contract per employee, only a range of dates and it then provides the sum for that range (unless I ran a query for each day, for each employee which would take me hours)
- employees dont have access to this system to enter their own # of contracts keyed on a daily basis.
- for entry, so far i have just been putting the first of the month and then the # of contracts.
In a nutshell, this is the calculation I am trying to create:
(Sum of "# of hours" for the month) / (total "# of contracts keyed" for the month) = employees average hourly productivity.
I have tried to do this with various types of queries and reports but with no luck, I get a prompt saying that access can't compare the 2 fields.
Is there a way to compare the data that is entered daily with the data i would enter monthly?
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
I have created an invoicing system for a CD shop
There is a transaction table which has each individual cd sold as a seperate transaction. Each transaction has an order number, so there can be more then one cd sold per order, but they all still have their own record in the table.
im now invoicing each order by mail merge based on a query that finds all the details on every transaction but wht ive found is that the mail merge puts each transaction onto a different page even if its from the same order number as another.
does anyone know how to group each order in the query so that all the items in one order come in a single invoice?
Hi, I have a query which numerous fields, and I need to make a report based on the query. However I need to group 3 fields in the query and press the sum button on 2 of them, Qty and Total Price (which is qty*price)
I need to do this so in the report when a particular wine is purchased more than once, instead of repeating the peoples name who bought the wine, it will only show 1 and automatically add the rest to the total price.
I dont know how to group within a query, can someome please tell me how? Thanks.
Hi to all;
I have one code of 6 digits; each digit refer to a group; first 2= product group; beverage; live animals,
.itc (24 product groups), the 3ed digits= food product, the 4th-6th digit= detail product group; vegetables, fruits,
.,the rest of digits refers to product name, carrot, apple,
itc , example 070511
How can I use the query to sum the product value at different group level; example the first 2= product group, ..?
Do I have to split my code to 6 cods to do my calculation?
Thank in advance for help
majed
I have created an invoicing system for a CD shop
There is a transaction table which has each individual cd sold as a seperate transaction. Each transaction has an order number, so there can be more then one cd sold per order, but they all still have their own record in the table.
im now invoicing each order by mail merge based on a query that finds all the details on every transaction but wht ive found is that the mail merge puts each transaction onto a different page even if its from the same order number as another.
does anyone know how to group each order in the query so that all the items in one order come in a single invoice?
Hi all
I am trying to find a way of finding the number of a group of sessions as a percentage figure. e.g. total number of clients attending 1-3 sessions = 20%, 4-6 =15%, 7-12 =21% 1-2years = 8%, etc. and entering this calculation in a report.hope you can help.
Dave
Question on grouping within Access Reports:
A simplistic view of the report I'm trying to generate is as such:
Company Name - Company Description - Employee
I am grouping by Company name, and I am hiding duplicates of Company Description because they can be long. I also have the Company Description as Allowing to Grow.
The problem is that the first record gives the company, the description, and the employee name on the first line just fine, but the second employee name won't be listed until the Company description ends. When the description is about a paragraph long, the other employees look very seperated from the initial record.
Any way to fix this?
Hi,
can form objects be grouped? i currently have numerous buttons on a form that are shown according to a button selection. my current code makes all buttons visible / invisible singularly but i wiondered if they could be grouped/ named and the get the code to make the group visible / invisible?
many thanks,
NS
Can you help me.
I have about 2000 records with Part Number XXXCOGxxxxx. This Should be C0G. Ex:
SPN
RPE122COG101K
RPE122COG681K
RPE122COG101K
RPE122COG681K
GRM40COG100J
GRM40COG100K
GRM40COG101J
GRM40COG150J
GRM40COG220J
GRM40COG221J
GRM40COG271J
GRM40COG470J
GRM40COG471J
GRM42-6 COG100J
GRM42-6COG220J
GRM42-6COG472J
What to write a query to change just the COG portion. Can you tell me the formula?
Thanks
Chris
Hi,
I would like to know how i can group numbers into bands.
e.g
Col 1
1
2
3
4
5
6
How do I group the above into groups of i.e. 1 - 3 and 4 - 6, or group in regular intervals like 1-2, 3-4, 5-6?
Regards
Hi all,
I have a db for logging meeting action points. Each action point has a description and owner. I'd like a query/report which will produce a list of action points grouped by owner (easy), but with a particular owner's action points at the top.
Essentially, rather than do a GroupBy and ascending sort, i need to specify the first group that is displayed. I don't care in what order the other groups appear.
Eg.
Action Point Owner
1. Task 1 DC
6. Task 6 DC
8. Task 8 DC
3. Task 3 AG
4. Task 4 AG
So, above if i just did an ascending sort, the DC records wouldn't be at the top.
any ideas?
El.
How do i group the following records
ID Surname Pack
29679Minican 1
29679Minican 2
27818Oliver 1
27818Oliver 2
27818Oliver 3
so its will show ...
27818Oliver
29679Minican
... on a spreadsheet
I have a table which stores meeting room booking information in half hour slots.
If someone books a 2 hour meeting then 4 records would be produced one for each half hour. I want to produce a query which will group the data by room (ScheduleID) showing the max and min times (ie the initial start time and final end time) for each event and the event details. The table structure is as follows
ScheduleDetailsID, ScheduleID, CustomerID, ScheduleStartTime, ScheduleEndTime, meeting purpose
And the query I have tried is as follows:
SELECT [Schedule Details].ScheduleDetailsID, [Schedule Details].ScheduleID, [Schedule Details].CustomerID, Min([Schedule Details].ScheduleStartTime) AS MinOfScheduleStartTime, Max([Schedule Details].ScheduleEndTime) AS MaxOfScheduleEndTime, [Schedule Details].[meeting purpose]
FROM [Schedule Details]
GROUP BY [Schedule Details].ScheduleDetailsID, [Schedule Details].ScheduleID, [Schedule Details].CustomerID, [Schedule Details].[meeting purpose];
Can anyone tell me where I have gone wrong. It does not group the data as I want it to ie by room, then time, with only the initial start and final end times. Thanks in advance. Peter
I have a query which has many sums and counts on things like "Company name", "region name" and "Development Name".
I'm using this query for a report to do lots of percentages with, but now i need to filter this also by a date period.
So the user choses "Alex Homes" as the company name and then "July 2006" as the reporting month, and i need all the sums and counts to stay the same and only count/sum the records in the chosen month.
I can't seem to think of a way to do this.
If you need more info then ask.
I have a set of evaluation response data. There are a number of question (like 20), and each respondent answered the question on a scale of 1 to 5. Thus I have a table Responses where each column is a question and each row is a Respondent's answers. Each cell has a value between 1 and 5 (inclusive), or is possibly NULL.
What I want is to be able to list out the number of people who responded with a certain evaluation for each question. So it would list the number of people who gave a 1, a 2, a 3, and so on for each question. So I'd get something like:
---------Q1 Q2 Q3 Q4 Q5 ...
-1- x x x x x ...
-2- x x x x x ...
-3- x x x x x ...
-4- x x x x x ...
-5- x x x x x ...
Ideally I'd like the questions to be on the rows and the numbers as columns, but I can just do the transposition when I make this as a report.
Any ideas of a SQL Query that will get me such a table? I'd really like to avoid VBA if possible (I'm writing this database to be used/maintained by a non-programmer), and I'd like to not have to develop like 20 different subreports in order to print out this information.
Thanks.
I am having a problem that I hope has a very simple solution that I am somehow overlooking.
I have simplified my query for the purposes of this question. I have a query that only get the date and amount of a transaction. I want to group the information by date and have the transaction amount summed. For some reason it will not group by date.
Here is my query displayed in SQL:
SELECT Transactions.Date, Sum(Transactions.TransTotal) AS SumOfTransTotal
FROM Transactions
GROUP BY Transactions.Date
ORDER BY Transactions.Date;
And here is a sample of the data returned:
DateSumOfTransTotal
12/13/20055.12
12/13/20055.12
12/13/20055.12
12/13/20055.12
12/15/20051.15
12/15/20051
12/15/20050.12
12/15/20056.56
12/16/200519.14
12/16/200512
12/16/20058.16
12/17/200511.11
Why will it not group all the 12/13 or 12/15's together? I have done other queries like this and not had this problem. What am I overlooking?
Any help is very much appreciated. Thanks,
Hi
I have this table
date, error code, user
i need the output to be :
User, Error Code, Month/Week1 Count of error code, Month/Week2 Count of error code .....
basically how do i make error code field as count with each week 1-4 for the month?
Format([AuditDate],"mm-ww") create week but in 1-52 weeks not 1-4 for the month. Also need something like ' count if week = 1'
Hope this makes sense.
Thanks