hi sorry if im in the wrong area and sorry for my spelling first time in forums.
i have a simple database for callouts at work but i keep getting double booked, can you help me with a code where the data checks the date and time and if booking already exists it will come up with an error
eg 12/01/07 at 11:00, but if record already exists "error (next avalibly time is shown), about 1 hour between times thanks
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only.
([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null)
How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I have a form which im using to store records about companies that I have mailings with. The company name is my unique field as no two companies should have the same name. This form is accessed by several different people and data is input so I dont want duplicates of the company name being produced. Currently, the form wont save a record if it is duplicated but by then I would have filled out the entire form and wasted my time. Is there a way to do the following:
As I enter the company name it would look up exisitng company names. eg if i wanted to enter a new company called 'Dans Plumbing', I would type 'D' and below the text box would display a load of existing records starting with D. after that when I type 'Da' it would only display records starting with Da and so on. All being well, when I have finished typing the company name there should be nothing underneath so that I instantly know its not a duplicate and vice versa.
The possible duplicate doesn't have to be underneath it could auto complete IN the text box a bit like the address bar on a web browser.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View Relatedso i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedHi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code:
Private Sub Update_DOD()
Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset
Dim DOD As String
rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code:
CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
Hi this is my first post... so hi all :)
ok what i have is a table with contact details 900k plus
there are about 90k of which are duplicates.
this is the basic feilds that are important in this case.
Id, data_source, data_recived, data_code,
what i want is to have a table with unique records (no dups in data_code)
this table will look like this...
Id, data_code, Num_dups, dup1_source, dup1_date, daysbtw_Dup1_dup2, dup2_source, dup2_date, daysbtw_Dup2_dup3 ,dup3_source, dup3_date, daysbtw_Dup3_dup4 ,dup4_source, dup4_date,
I know there is no more than 4 dups of each record.
what i want from this is a table that will give me a record of how many dups for each record then all the dates that they were added and the date between each record entry.
if anyone can help it would be great .
thanks in advance.
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
View 11 Replies View RelatedIn VBA, how to compare date variable with date/time field from table, as when defined the data type in table, date/time option is the only choice for date data type even though I don't want the time portion.
View 13 Replies View RelatedHi,
I am trying to compare a value in my databse produced by the date() function, short date format, to one that is exactly 24 hours after the value recorded by the date() function. If the value in the database is 24 hours prior to the current date(), I need to flag a text box a diffrent color to alert the user. I am unsure on the If statement that I will need to produce this result.
Any help would be greatly appreciated!!!!
Thanks
Mikeco555
How can I convert a Date/Time field into a Date field?
View 4 Replies View RelatedHi,
I have a report that have a datebox(Short date) and a timebox(Short time) and also a box that contains numbers like 36:59 and so on. That number is hours and minutes, I would like to take the date, time and add my 36:59 and get a new date from that and put that in another box. The date and time is used as planned date and planned time for some work to happen. 36:59+planned time+planned date=should be planned finishing date and time. Does anyone know what I have to do, to make this happen ???
How can I create a field in a query, extracting the date portion of a date/time field? The format is mm/dd/yyyy hh:mm:ss. I need just the mm/dd/yyyy so I can prompt the user for a date range, without them having to key in the date mm/dd/yyyy 00:00:00 to mm/dd/yyyy 23:59:59. Please Help
View 3 Replies View RelatedHey, all! Thanks for helping, here is my situation.
I have a table with about 70,000 records that have duplicate Address field values. The rest of the field values for those records are different. When I do a find duplicate querry I get the result that 17,000 records have the same address. However, when I do the append qurrey as instructed here: http://support.microsoft.com/?kbid=209183 I get a total of only 600 records in the new table. I have tried deleting all of the indexes for both the new and old table, with no luck.
I'm using Access 2000 on XP Pro.
If anyone could help with this I would greatly appreciate it!
Thanks
Will
I have a table called : tblTemp contain the field: EndTime (type: ShortTime)
A combo box: cboTime
How can i assign value for cboTime using the field: EndTime from tblTemp
I tried:
dim db as Database
Dim rec as DAO.recordset
set db = currentDB()
Set rec = db.OpenRecordSet("tblTemp")
'Go to appopriate record
cboTime = rec![EndTime]
But i recieved the message: You can't assign a value for this object ...
Okay i know you can make a form post the date and time with the =NOW() command, is there a way to make it so it shows the current date and time? so you can watch the day go by in seconds if i wanted to?
View 4 Replies View RelatedThis is very tricky I hope that someone can help please. I have a table that I imported to access, it has four columns, start date start time finish date finish time. I need to generate a report to show items that took more than 30 hrs, ontop of this items that fall within friday have a different senario. Someone gotta help.
View 2 Replies View RelatedI have a field [Date] in one of my tables, and the field is set to Date/Time datatype....format is "mm/dd/yyyy"......but when I type in "03/29/2005", I get an error saying that "the value you entered is not valid for the field".....
View 1 Replies View RelatedIs there a way of having todays date/time appear in a tabel automatically like a auto number?
View 6 Replies View RelatedI have a field in a table set to Date/Time. Is it possible to set the properties so that it always defaults to "PM"? In other words, if I enter "5:30" and then TAB, I always want it to be entered as "5:30 PM". Right now it appears to default to "AM". For this particular application, 90% of the entries are made in the PM.
Thanks.