Hi i have a field which is a date/time field and its format is short date which is xx/xx/xxxx. I want to ask if there is any way i can add a validation rule for only the year to be larger than 1980???
View RepliesHello everyone
I am wanting to pull out only the month part from a date field, 11/10/2005.
In the query I have made an expression to pull the month, eg 10 for October.
I need to convert this number of the month to the Title of the Month.
I made a combo box on the report based on the Expression and in the row source put
1,"January", 2,"February",3, "March", 4,"Apri", 5,"May", 6,"June", 7,"July", 8,"August", 9, "September", 10, "October", 11, "November", 12, "December"
Unfortunately it still comes out with the number of the month.
Can anyone tell me please where I am going wrong.
Thank You in advance.
Hi,
Hope someone can help me out on this one. Searched the forum but can’t find anything to help me out.
I have two tables:
tblCustomers that contains unique customer records (names addresses etc.)
and
tblComments that contains comment data for the customers
Tables are joined one to many tblCustomers -> tblComments on account_ref
tblComments can contain several records per customer, all are datestamped.
I want just the latest datestamped comment record per customer, just can’t seem to work the logic on this one. Must be so simple but can’t fathom it.:confused:
Ideally, I’m producing a report of Customer data (Name, address, contacts etc) + the last comment record for each customer. Have started with a simple query, but have hit an impasse. Have tried sorting, group by, top 1, distinct etc, but don’t seem to be getting anywhere.:mad:
If someone can point me in the right direction, and give me a starter for 10 I’d be much appreciated.
I have a table that lists classes available (tblCourses); one that lists class dates (tblDates) and another that lists employees (tblEmployees). I have a fourth table that combines that data into classes taken by the employee (tblTraining). I have a form to input the employee's training with combobox fields for the COURSETITLE and CLASSDATE. I want the CLASSDATE field to only display the dates available for the specific class that was selected. How do I do that?
View 1 Replies View RelatedI have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View RelatedHi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
View 11 Replies View RelatedIn VBA, how to compare date variable with date/time field from table, as when defined the data type in table, date/time option is the only choice for date data type even though I don't want the time portion.
View 13 Replies View RelatedHi,
I am trying to compare a value in my databse produced by the date() function, short date format, to one that is exactly 24 hours after the value recorded by the date() function. If the value in the database is 24 hours prior to the current date(), I need to flag a text box a diffrent color to alert the user. I am unsure on the If statement that I will need to produce this result.
Any help would be greatly appreciated!!!!
Thanks
Mikeco555
How can I convert a Date/Time field into a Date field?
View 4 Replies View RelatedHi! Please help!!!
I'm currently building a bookings database and have encountered an alert message that I cant seem to rectify -
"You cannot add or change a record because a related record is required in the table 'Booking Details'"
Basically - I have a 'Customer Database' form that is linked (via command button) to a 'Booking Details' form. Within 'Booking Details' I have 2 sub forms - 'Booking Quote' and 'Booking Payments'. Both subforms are linked to the 'Booking Details' form by the 'booking ref' field with RI.
I have no problem updating information in the 'Booking Quote' subform, but when I try to add information to 'Booking Payments' it states the above message.
Can anyone please advise as to how I can prevent this happening? I'm slowly losing my mind....!!!
Many thanks,
Stacey
Currently I keep getting this error: "You cannot add or change a record because a related record is required in table"..My current tables are this:
Primary Table with persons info:
Primary Key - Auto number generated
Name
Address
Email
Phone
I have 4 other tables with use check boxes.
ex:
Table 1 - Geographic locations visited
ID - Auto generated
USA
CANADA
ASIA
ECT...
Table 2 - Languages Spoken
ID - Auto generated
Spanish
Chinese
English
Table 3 - Skills
ID - Auto generated
Hunting
Dance
Singing
Weaving
Is this not a genuine one-to-one relationship table? I mean No two people would have had visited the same places and speak the same language no? I tried to create a one to one relationship with the primary key to the auto generated ID of the child tables but I'm sure that is not how you do it. Also when I try to save the check boxes in my form and I close it and come back it doesnt save and is blank again. Is it because my form gets its information from a query that takes all the information from all the tables.
how I can get this to work properly? Am i to make use of a foreign key? I've read a lot about it online and watched youtube videos but I dont see why I need it here in this case. Is there a way to set the IDs in the child tables to be the ones from the primary table? Or do I have to use a foreign key and manually input the primary ID into them?
Or would it be better to have all these child tables in the primary table and have one large table instead? I just didnt do that because one of them has like 20 checkboxes with cities and locations
I have a problem with my access form, it said "You cannot add or change a record because a related record is required in table". I have attached the access file.
View 14 Replies View RelatedHow can I create a field in a query, extracting the date portion of a date/time field? The format is mm/dd/yyyy hh:mm:ss. I need just the mm/dd/yyyy so I can prompt the user for a date range, without them having to key in the date mm/dd/yyyy 00:00:00 to mm/dd/yyyy 23:59:59. Please Help
View 3 Replies View RelatedI had this error occasionally popup whilst testing my code.
I thought it was strange, because it was in a Microsoft message box, with a Microsoft message, not one of my own messages from my own error routines. This made it very difficult to isolate, I didn't have a clue what was causing it.
However I decided to track it down and to cut a long story short this is what I found:
Err_EditDetail_Click:
MsgBox "Error!"
MsgBox " Error From >>> EditDetail_Click() Error Number: " & Error.Number & " Error Description: " & Err.Description
Resume Exit_EditDetail_Click
End Sub ' EditDetail_Click()
Notice "& Error.Number" I don't know how this got changed from "& Err.Number" to "& Error.Number" but that was what was causing the Run-time error '424': Object required.
Can someone help me out by looking at my database I've been messing with it for 3 days and I can't figure it out.
I have 4 tables each are in a 1 to 1 relationship. From there I have a query that is for every field between the 4 tables. I then have a Tab Control form with 4 tabs and it uses the qryAll I have setup. when I enter on the form I can enter info on all 4 tabs but if I try to go to a different record I get the message "You can't add or change a record because a related record is required in tblScouts". I have tried so many different options. I had even posted yesterday trying to do the same thing but my tab controls had subforms on them. The_Doc_Man was helping me with that issue but I couldn't get that to go either.
Would anyone be willing to look at it for me and explain to me what I was doing wrong?
Rick
Hello everyone, I'm encounter a problem trying to write a code.
EX:
Date Months_to_credit Final_result
01/31/06 4 10/01/05
02/28/06 6 09/01/05
03/31/06 8 08/01/05
Does anyone have any ideas how to to substract Months_to_credit from Date and to return a date in the Final_result field?
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only.
([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null)
How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a form with date/time field. I have the default value at =Now(). My problem is I would like for this particular field to stay with the current date/time all the time. I mean if I created a form last week with the date/time of 3/14/2005 12:54:34 PM and go back to the same form to edit something this week I would like for that particular date/time to be the current date/time and not the date/time from the week and time the original form was created.
Thanks for any help!
Greetings,
I am running some code to work on a table and I want to blank a date field. It is a stock control system where when a vessel is emptied I would like the updated field to become blank as it is empty and therefore has no history (this is stored in another table.)
The code I have tried to us is; (where updated is a date/time field)
Else
rst![Updated] = " "
rst![Volume] = "0"
End If
rst.Update
rst.Close
The message I am getting is 'Data type conversion error'.
How do I get this field to be blank by code?
Thanks in advance
rbinder
i want the user to write any date and any time in same field in my form but i dont want to choose function now()
View 1 Replies View RelatedI have a field that contains an input mask : 99/99/00 99:00;0;_ this allows the user to enter a date and time in one field. Such as 04/24/13 15:00 . I want to put validation on that field, so that the user can't enter a time that does not exist such as "25:30" or a date that hasn't happened yet. How to accomplish that? The data is going into a linked SQL table so I'm limited on what I can do on the table end I think.
View 2 Replies View RelatedI am trying to create a txt file to import into our accounting software. I get the file (its blank), but it fails on the WriteLine and i get the run time error. I have a command button on a form that the user will click to export the file.
Private Sub cmdExport_Click()
Dim cnn As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strPath As String
Dim strPathGB As String
[Code] ....
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
Right now to get my Access database into MySQl I have to copy it out of Access into Excel then I export it to a delimited text file.
I would like to eliminate the Excel part and go directly from Access to a text file.
The problem is with the date fields. When exporting from Access it always adds the time (00:00:00) which MySQL chokes on. It seems there should be a way to do this with the export function, so that the date is just the date and no time.
Any help would be appreciated.
Mark Agnum