Sub Service ID (primary key)
Sub Service
Main Service ID (foreign key)
one-to-many relationship
I would like to query the tables, so you search on the Sub Service and it returns all of the Main Services it come under. I would like this query to run off an Input Box that will allow me to type in the Sub Service or a word.
I have managed to get the Input Box, by putting the following code into the criteria :InputBox («prompt», «title», «default», «xpos», «ypos»). But when I type something in the search fails. I have chopped and changed the fields I search on, but can't get it quite right.
Can anyone help me on what fields to choose and what I need to set in the criteria to get the search running properly from the input box?
Also is there any way to program Access or VB to return the results in a message box e.g. **** is a Sub Service of ***** - listing all main services it appears under?
I have a field in my query which returns results based on a formula that is a function of other fields. The results are: Pass and Fail.
I want to make a query that returns only Fail rows. When I enter Fail as the criteria, a parameter box pops up requesting information be entered before continuing.
I have a field in my query which returns results based on a formula that is a function of other fields. The results are: Pass and Fail. I want to make a query that returns only Fail rows. When I enter Fail as the criteria, a parameter box pops up requesting information be entered before continuing.
I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?
I need to run a parameter query in which you enter a product number and the query (a) returns the list of components and (b) then automatically reruns the query for these components. In other words, I enter an input (a product number) the query gives me outputs (component numbers) and then reruns the query with each of these outputs as the input (i.e. I want to know what are the sub-components of these components). This process stops when all the components are raw materials -- this will be easily identifiable.
Does anyone know how to set-up this type of query?
I have a database that has several tables, each table has account numbers in them. I also have queries set for each table to bring in desired information. Is it possible to set up a form so the user can input an account number and depending on which table the account number is in, that query will run?
FTA # Date Attended Last name First name assigned person......
Each week I need to generate a report that shows the people that attended for that week, grouped by the assigned person. I only want to show the data for a specific "date attended" (i.e. that days date). I figured I first need to generate a query that only returns the data for that specific date in the "date attended" column. I did that but it is manuel by using the criteria field.
Is there an easy way to type in the date that I want the query to use as the criteria?
I'm creating a database for work, and one of my forms currently has 8 subforms on it. For each individual account there can be one, none, or many of any combination of these subforms that will have information on them. I need the form to be able to show all of them, as someone else will be inputting all the information when the database is complete, but to make it easier I have set it up with checkboxes so that when a checkbox is checked, a subform shows, if not checked it doesn't show. I have very limited skills with VBA, so that in itself was an accomplishment for me.
My questions is: is there anyway in access to do it so that if a subform doesn't show, all the ones beneath it that do show will get bumped up so that it is easier to read/input data?
I have attached my DB and the appropriate form is "ICinfoT."
I am looking to find out if I can build a "on the fly" pass-through query based on user predefined data.
Basically I am linking to a massive database. Access link to DB2 table. In order to make the system useable for the users they need to edit the query before it's ran. If not the query over the network takes around 5 minutes every time it's accessed and options such as filters and sorting are chosen. So if a user sorts one column and filters on another the query has now ran 3 times. Once to open, once to filter, and once to sort. That just took 15 minutes.
So If there is a way to build macro or form that asks them for specific information first and then modify's the query so that it only gets ran once that would be fantastic.
Example:Table has 7 fields/columns. Usually they will do 3 things. Pull back data from either a month or quarter. Then filter a column by it's content. Then sort by date of another date/timestamp column.
I need to make a query work so that when someone enters info into a master form, it will pull the data for that job onto other forms when the job # is entered. Thanks for any help.
I have a database table in which I'm trying to pull sales data and generate sales reports from. The problem I face is that the sales data is recorded into a table with this structure:
Year | Customer | Sales_Month_1 | Sales_Month_2 | Sales_Month_3
Rather than having a single field "Month" in which I could set criteria or prompt the user to select a month to derive sales data from, I need to write a query that through user input (or through some code within the query) the right field will be selected. An example of this would be generating a report for the 1st month of the year, obviously.
How do I use a update sql query to update a field based on a string from an input box. Heres what i have been trying:
Code:
Dim NETWORKBOX As String NETWORKBOX = InputBox("NETWORK TO IMPORT" & Chr(10) & "EXAMPLE: PRIMARY", "NETOWRK TYPE") sql = "UPDATE " & TABLENAME & " SET NETWORK = " & NETWORKBOX & " ;" DoCmd.RunSQL sql
If i run the code and input 'PRIMARY' in the NETWORKBOX the sql query will return an 'enter parameter value dialog box' with the word 'PRIMARY' above the input field.
I have to print a label quickly every time that the product hit the warehouse. The label has been created as a report linked to the query that will provide the info to the report. In order to make this report printing as quick as possible the idea is to scan the sample id from the product and once the label is printed scan the next sample and an on.
I'm not an expert on VBA but I have created the following scrip but the reports doesn't pop up.
Here is the code:
Dim SampleID As String SampleID = InputBox("Enter Sample ID") If SampleID > 0 Then DoCmd.OpenReport "rptGRM_QuickPrintLabelDymo", acViewPreview, , "[Sample]=" & SampleID Else DoCmd.Close End If End Sub
I'm using I have a secondary control being populated by an entry from another control. I was able to find the code I needed to do this using a combo box here in this forum.
me.txtDependent=me.cboPrimary.column(#) (specifics changed to protect my company's paranoid view of privacy)
the code itself was showing up in the secondary control instead of any value. I found though that moving the code from the On Change event for the primary control to the On Current event for the form itself everything is working beautifully.
However, I have a different task now that I need to be able to accomplish with the same two tables but in the opposite direction. I suspect that I'm going to need to create a second set of controls and maybe even a second relationship or table to do this. To use a set of specifics that I think will get this point across, if I had a master table which includes a field for "City" and a secondary table, CityState, which contains both "City" and "State", and two controls, a combo box cboCityState to look up the specific City and a text box, txtState to display the State, putting the following code in the City combo box's On Change event populates a text box with the State when the specific City is selected, or putting it in the form's On Current event will be sure that State shows up in all the copies of a form when the form is used in a search and the City is not changed :
me.txtState=me.cboCityState.column(2)
What I need to do now is to set up a control which allows me to type in the State and have the results show all records that include that State.
I'm using this in a Filter by Form environment. I know the objections to this method and the benefits to creating a dedicated search form, but this method appears to be working well in all other ways for us for now. I have several situations within this form where I have one control showing up at the initial load of the form and at the beginning of the filtering process, allowing selection of multiple values from a long list of values in a list box, for instance, (using the On Filter event) and other controls showing up as a result of the filtering process, to display the selected criteria only, for instance (using the On Apply Filter event), so I'm aware of how to make this work if that's required. I'm thinking I may need to create a second control, something like txtStateInput, to accept the State search criteria and another, something like txtCityResults, to show the cities that are part of the resultant records.
I have a form in my front end database that is supposed to allow a user to search for a record based on account number and then make changes to the that record and for it to save in the back end database. I have the search function working where it populates different input boxes on the form with what is stored in the back end database but I cannot get the update function to work. I have tried to assign each input box with a variable and then run an Update SQL function to update each of the fields but the updates are not storing. Any example of a successful update statement that uses VBA variables in it or a way to update a specific record via a recordset type function?
I run a charity pre-school and have invoices to send out. Some of the parents cant afford to pay the whole amount in one go, so we give them a payment plan. e.g. If an invoice is for a 6 week term we let them pay weekly. So I have a check box on my form to say "are you on a payment plan".
Then - I have an free form input box..."How many payments..." and the answer may for instance be '6'.
What I want to do now is dynamically create/display 6 date fields, to record what the agreed payment dates are.
but maybe the answer is 4, or 7, etc. So I need to create/display the correct number of payment date fields.
I have a query showing lots of records of equipment that is in different rooms. I would like to have a form where the user can bash in a room number and all the records from the query that have that room number in it pop up.
hi everybody, im have a database with table called "project". there are many column in this table. my user want to export this table to Excel, but only some of column, with particular order ( depend on him) to analyze in Excel. he asked me to build a form with a list box, drop box,somthing like this, so he can choose what column to export in what order. i try to make a query like this: " Select Forms!UserInput.combobox1.value , Forms!UserInput.combobox2.value,etc, From Project" but it wont work. Dou you have any idea. thanks in advance
The Table1 holds data that is a request for a task.
ID, Request, Task_tms (the number of times the task is required to be done)
1, Make a cup of coffee,15
Table2 is my allocation of people to the tasks.
ID, Person, Task_done (the number of times this person has done the task)
1,Sally,10 1,Eddie,5
What I want to do is to limit the amounts of allocation in some way (ie in this case if I have already put 10 for Sally then I would be unable to put anymore than 5 when entering the amount for Eddie.
Additionally if I were to allocate all 15 to Sally then no additional people would be able to be allocated to this task (ID 1)
The two table are in datasheet format linked on a form.
I have a search form that looks up a value in a field and lets the user know if it is there or not, they have now asked to put in multiple values to search... eg. searching containers number, I will put user input box where they can put these numbers
NYKU023561 TRLU102356 TCNU123023
This will search my container number field and show a pop up message box saying.. Please note below NYKU023561 - has been found you cannot use this container TRLU102356 - has not been found please check internal system TCNU123023 - has beeen found you cannot use this container
Below is the basic search I had before which was all I needed.. how can I adapt this?
Code: Private Sub Command256_Click() If (CntSearch & vbNullString) = vbNullString Then Exit Sub Dim rs As DAO.Recordset Dim CNT As String
I'm attempting to build an import module so that my users can take data from different walks of life and import it into my tables. I'm doing this by setting up a module and allowing the user to specify which column data will come from when importing data. So lets say I have a field that is CustomerID in my table and user one pulls data from 1 place and in his excel or csv file, customerid is in field 1. Another user does the same thing and its in field 2.
How can i make some form of a loop that when I'm attempting to update data, i pull the correct column?
strSQL = "SELECT * FROM tblImportTable" Set rst = db.OpenRecordset(strSQL, dbOpenDynaset, dbSeeChanges) With rst Do While .EOF = False If IsNull(DLookup("DefaultValue", "dbo_tblImportTemplateDetails", "Template_ID=" & Forms!frmImport!TemplateName & " AND FieldName='CustomerID'")) Then
- text box for user to enter EMPID, txtEMPID - LASTNAME
I would like to create a button to initiate a query to do the following:
- once the user enters a EMPID in the form, it will search in the TABLE under the EMPID field... - if the user enters an EMPID that is in the TABLE...display "Y" - if the user enters an EMPID that is NOT in the table...display "N" - a error message box needs to pop up if "Y" to alert the user that "the EMPID already exists and that duplicate entries are not allowed"
One of my main questions is how do I run a query based on the users input and search a table? would the following work in the query?
I am a novice to access. I am building a database in an effort to learn in the process. I wished to enquire about the possible issues that could be with defining the relationships that i have created in the project. (attached img).
I cannot seem to define a form based on these relationships to input the data.
