Help With Running Query From Info Keyed In Form
Feb 22, 2005
I need help to figure out how to create a form that includes a place to enter date ranges (A start and an end date: the field name in the table is CrossClampDate), patient name, and case number as a search. I have just taken 3 levels of Access classes and saw an example of this, but we never went into it and from the Properties box for all parts of the form I still can't decipher how it was done.
Basically, I want to run the operations a query goes through by inputing this information in a form.
I have created an actual query that performs this operation, and it works. But I am prompted for each criteria separately in individual pop up boxes. I just need to streamline this operation for the users.
Any help would be GREATLY appreciated!!!
View Replies
ADVERTISEMENT
May 4, 2013
I am wondering if Access 2010 has the capability of automatically filling in a field from info keyed into previous fields. For example, I want a confirmation number issued which is made up of all the characters keyed in the previous three fields. For example, assume the previous three fields are:
Block = 01
Building = 125
Room = A
Confirmation Number =
Therefore, the confirmation number would automatically be filled in as 01125A.
If so, how do I go about setting it up?
View 14 Replies
View Related
Aug 2, 2007
I have an application that has two tables, linked on a common key. The main data entry form is for invoices, and has a sub-form for parts used. A similar report/sub-report is used for reporting. Everything is fine for records that are entered via the form. My problem is that when I import data from other sources ( consolidation process ) the calculations are not performed. So when those records are displayed no totals appear until I click on a control that drives the calculations. I don't want to store totals in the database but I need to have them reflected on the viewed form without operator intervention. Otherwise I'm open to incorrect decisions when the operator doesn't notice that an invoice doesn't reflect the cost of parts used.I'm looking for a "one-time" process that I can invoke after loading new data that would "touch" each record (ideally each "new" record but there's no impact to re-calculating existing ones) and drive the calculations so that the viewed form is correct.It doesn't need to be "easy" or automated since the end users won't do it, only myself as part of the data consolidation.Any ideas?Thanks
View 14 Replies
View Related
Feb 28, 2007
hi there,
I'd like to ask the solution for my problem.
I made a new project using ms access 2003,crystal report 9, and visual studio 2005.
I just made a simple access dbase with 1 table(Table 1) and protected with password, o I forgot this table has 2 field(id and desc).
After that I made simple report that using DAO connectivity(save data with report option is disabled).
At last I made simple program(windows app) using visual studio 2005.
I put the CrystalReportViewer component, and these is the code :
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
namespace prj
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void crystalReportViewer1_Load(object sender, EventArgs e)
{
}
private void Form1_Load(object sender, EventArgs e)
{
crystalReportViewer1.ReportSource = System.Environment.CurrentDirectory + "\Report1.rpt";
crystalReportViewer1.LogOnInfo[0].ConnectionInfo.UserID = "Admin";
crystalReportViewer1.LogOnInfo[0].ConnectionInfo.Password = "12";
crystalReportViewer1.LogOnInfo[0].ConnectionInfo.DatabaseName = System.Environment.CurrentDirectory + "\db.mdb";
crystalReportViewer1.LogOnInfo[0].ConnectionInfo.ServerName = System.Environment.CurrentDirectory + "\db.mdb";
}
}
}
and the problem is when I move the access database file to other location, the viewer shows a box to be confirmed by my UserID and password,
my question is how must I write in the program so that the box doesnt come out.
thanks
View 1 Replies
View Related
Jun 20, 2005
Actually, I don't think i've done this right, but here's the goal I wish to achieve.
I have 2 tables, one containing contract info and another containing client info. I have the 2 related using the client name field. I have a form which is based on the contract table which contains a drop down field of client names. When I select a client, I want it to update a read only client address field within the form, just for display purposes.
Is this easy to do and can anyone point me towards some examples on how to achieve this???
Many thanks.
View 1 Replies
View Related
Aug 31, 2006
I have a form that has a start date field and an end date field and a client ID field. When I click a button to run a query I want the query to take the start date and end date and filter the query on those dates and also only supply data for the client ID
at the moment when I run the query i manually type the start date and end date and then scroll down the client ID to the one I want.
any ideas how to do this from the form
many thanks
View 2 Replies
View Related
Jan 19, 2007
I have code in my form using Do.Cmd:
stDocName = "QueryName"
DoCmd.OpenQuery stDocName, acNormal, acEdit
which is code created using the Access Wizard.
I have another delete query that I wish to run from the form but when I edit the QueryName to be the name of the query it doesn't run and if I use the wizard to select the query from the list the delete queries do not appear. The query runs fine when executed separately - i.e. not from the form.
Is there an alternate syntax to the above to run delete queries or something that I need to change in the delete query itself so that it can be run from my form?
All help welcome
View 1 Replies
View Related
Mar 29, 2014
I have a form with a select query running as record source. Once the input for the select query is entered the form runs. Then after that there are some manipulations in the form and it is displayed. In this second phase the form must be displayed without running the same query again. How can I do this?
View 8 Replies
View Related
Apr 6, 2012
how I can have a combo box on a form, and once a value is picked, return a query that displays all the data based on that value. I have tried using sub forms and the after update but I cant seem to figure it out.
View 2 Replies
View Related
Jun 13, 2006
Hi,
I have a query that I would like to run from a form. I have created the button and the query, but want to add in a clause that will use the user selected record / field as the criteria for the query when its run.
Got any examples of code I could have a play with
I am struggling here so need any help I can get!!
Cheers
Paul
View 1 Replies
View Related
Mar 24, 2013
I created a navigation form on which I put a form call [frmAnimal Setup].
I then placed one combo box on the Navigation frm Header. I have bound it to its source and it actually queries the tbl and show the right info. However when I select one, it will not let me.
In addition, [frmanimal setup] will not allow me to select a breed although it does query the tbl and shows the right information.
View 1 Replies
View Related
Jan 9, 2014
I have a form which lets the user enter a contract ID and then a combo box that has a list of reports which run against whichever ID is entered.
What I want to know if I put the ID's in a table if theres a way to allow the user to select multiple ID's in one go and run the report against them the range rather than 1 at time?
I'm thinking about utilising the check/tick boxes would this be possible? or another way?
I'm using 2003 and have some VBA ability.
View 5 Replies
View Related
Aug 18, 2015
I have a query that uses the input from a form as criteria, which is then used in a report. The form input is a drop down based on another table. This is a sales pipeline report, and the list is a list of sales people. The report works perfect for all sales people except one. When I run it for the one, I get the following error:
"This expression is is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables".
I DO NOT get the same error when running the query by itself - so assuming there is something in the report causing this. I do have some sum formulas in the report.
Again, no other salespersons selected cause this error -- so I am assuming there is something in the dataset for this person that is causing the error.
View 8 Replies
View Related
Dec 18, 2013
I am trying to run a query and display the results in a report (the report side of it is childs play and not a problem). The problem I am having is that I have a search form which should allow the user to search any one of 6 fields (text boxes) or a combination of each.
If the user enters something into a field then that search criteria must match. I wanted to have it so if all fields are left blank then it will show all entries in the database (but it isn't, it shows a blank report). I also wanted it to allow partial completion of boxes.
So for instance if I have 5 customers (Jones, Jonson, Jonus, jimjonkins, Janis) and I type "Jon" into the name field then I would like it to show the first 4 records as they all contain "jon" somewhere in their name but its not, its only allowing exact matches.
I currently have '[forms]![Search_Customer]![Search_Name]'.
View 2 Replies
View Related
Nov 7, 2006
I need help on this, from what the best concept is, to what I need to look into using:
I store Quote data from phone calls into tblQuotes. There is a seperate table that holds much of the same information except that it is for actual orders called tblOrders.
As far as function goes, I have each working much the way I need it to except for one thing... If a sales person is on the phone with a customer with a quote already in the system, right now they re-enter the data into the Order table. Most times, the order is what was quoted, but maybe with a few small changes (so I will wnt to keep a historical record of the quote). How could I copy the contents of the quote recordset into the recordset for an order, where all the sales rep does from there is edit the quote to the actual order?
Would I use VBA or an update query that is executed via VAB? Honestly, I am unsure how to do this at all, I hope someone has seen this before and has a good suggestion...
Thank you.
View 2 Replies
View Related
Jan 26, 2015
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
View 4 Replies
View Related
Dec 20, 2011
I'm working on a project that has two tables. "Calls" and "Customers". The Customers form has a subform, "Calls Subform" in it. When you click on the (New) Hyperlink a new form opens, "Call Details". I would like to pull information off of the "Customers" Form and insert it into the newly opened "Call Details" form.
Problem #1) Home Phone (named "Phone" and Text223 (named "CID"): are both bound controls so I have to do this in an OpenArgs type process.
Further details:
On "Customers" the following is true:
"25" is the "ID" for that customer on the "customers" table
"Home Phone" is the home phone number on the "Customers" table
On Call Details the following is true:
Home Phone is Bound to a table "Calls" and needs to pull it's data from Customers Form..Text223 is CID and bound to the table "Calls" and needs to pull it's data from "Customers" form.
View 14 Replies
View Related
Jun 7, 2006
************** edit: Fixed!!!! *************
The database I'm working on is coming on nicely, thanks to some valuable help from this forum. But I've got a couple of new problems that I just can't seem to get my head around. Really hope someone out there can help!
So...
I have two tables (well, there are more.. but there are two main ones with the important data on them). The first is a list of Customers (you know, the usual Name, contact, telephone etc...). The second is a list of jobs for each customer.
After starting from scratch, I created a nice looking form wth control tabs that on one page shows you the customer information and on the second; the job history for that customer. I then have a third tab which lets you add new jobs. So I'm all chuffed because that is the basics of what I wanted it to do.
However, I need a hard copy of the job report to print out and give to an engineer to fill in or to print in future should a customer wish to see it.
Try as I might, the reports function didn't look as if it was something that could be "designed" the way I wanted it to look. So, I figured another form was in order.
I started by building a query which included all the fields from the two tables mentioned above in it; I.e. So it would pull up a Job Printout by a workorderID number. That way it would show all the company info PLUS the detail of that one particular job.
Problem is this: I can see from the query in table view that the Jobs are listed; but alongside them is a straight listing for all the companies in the database. Basically, the Company who received the job in question is not being shown by the query.... if you follow me. (Apologies if I'm explaining this like a fool).
Question 1 then... is how do I fix this? Is this something to do with these arcane relationships things?
Question 2: How do I create a button to print that one "form" by workorder ID.
Question 3: Did I do the right thing by using a "form" or is there a better way to create a "report" for printing that can be formatted the way I want (with logos and stuff)
Thanks again peeps!
View 3 Replies
View Related
Apr 1, 2005
Hi, I have a from which is based on a simple query.
It prompt users to enter a booking number and then shows all info they have previously entered themselves.
I did this in order to give them te opportunity to alter the info they've entered earlier.
Now what I would like to have as an option is
to give them the same form, for which they enter a bookingno. and having the possibility to reuse the information attached to the booking.
My question is:
How do I create something like this?
Cause if they change the bookingno on the current form, it will not create a new record with a different bookingno but it changes the bookingno in the current record.
So what I want is to change the bookingno to create a new record with mostly the same info.
Can you guys help me out?
Thx,
Lion85heart
View 1 Replies
View Related
Mar 27, 2008
I know there should be a simple solution to this problem but i have not worked on access for some time and the cobwebs is too thick.
I have 2 tables one being Stock codes with related fields: Stock code id; Stock code;length;width;height.
Second table is Order Details with related fields: ID; Order id; Stock code;quantity;length;width;;height.
Did a query running the stock codes with length width and height.
Did a form with all details, calling up the stock codewith the query. The info on length width and height to the related stock code is on the form but how do i relate it back to the table Order details.
In the order details table the stock code is showing but none of the other related info.
As i said it is something small but i cant get round it.
View 3 Replies
View Related
Apr 16, 2008
I have 2 different sets of tables,forms and queries, one for quotes and the other for orders.
All is basically simalar but the reason why i did not combine the two in one set of tables and queries is because after a certain time i want to delete some quotes and would also have too many fields in one table to manage.
Both have a main form (own table)with customer detail and then the subform (own table) contains various fields with data relating to products.
My problem now is because one in 5 quotes get accepted i want to just copy one field from main quote form to main order form and then 6 fields from quote sub form to order sub form, the rest of the info will have to be put in manaully in the orders form and sub form.
I thought of running a macro to open order form but not sure how to populate the relative fields.
Any suggestions, prob simple way of solving this but i am self taught and therefore dont know it all.
View 3 Replies
View Related
Jan 22, 2012
My current database is in need of an upgrade. Currently (view image), as you can see (its the only form), each student entered into the database can only have one course. However, I would like to add the ability for students to have multiple courses. my problem isn't so much how does the database user enter in the new course for the student. This can be achieved with another form. However, I am struggling on how I would display these multiple course, in a user friendly way, on a form. What controls do i use? I'm thinking a table control would be suitable (much like an excel spreadsheet) as it would allow show all the courses/ edit a specifc field if required. However i do no believe access 2010 has this control.
View 1 Replies
View Related
Oct 24, 2012
How do I type info into a form and then save it to the database.
View 4 Replies
View Related
Aug 17, 2005
Is there any way I can remove specific information from all the records in a field using a query?
For example- how could I write a query that would remove the "NME" from NME ACTIVE; FENCE CO INC? I know you could add text to a field by including & "text".
View 1 Replies
View Related
Sep 7, 2005
How do I make an append query only append the records beginning with the next autonumber?
I have linked tables in db...one db is for warehouse employees to input their orders and the other table is in the original db for managers to use for reports. I need to append the records to original db throughout the day, but the records cannot be deleted from warehouse db because it keeps running total of order minutes (for production purposes) so employees know how many minutes they have (and need to make up) through the day. Also, managers need up to date db so they can see if they are on track.
The autonumber field is my primary key..
I hope this all makes sense.
Thanks in advance
Noreene
View 3 Replies
View Related
Nov 12, 2006
For some reason the query I built will not let me enter any info into it. Is this a relationship problem or because I am using the querie in a form that has subforms, (I can enter new info into the subforms.) or because I wrote code to just print the report to the current record? Or something else????
Thanks!
Julie
View 7 Replies
View Related
