Hi I've search the form for this and although I have found answers they are all in Access 2000 or above which I cannot open as I am limited to Access 97. My problem is this I am using a form with three combo boxes (article, line and process) to put data to a query (search) while this works fine if all fields are filled it wont work if any of the fields are left blank. What SQL code would I need to put a condition that if the field is blank it would be left out of the query? I'd really appreciate some help.
Thanks
why the code below is not functioning properly. When I type in an acronym in the textbox, it keeps saying there is an error "Run-time error '3345': Unkown or invalid field reference 'ABO'." I do have ABO in the field.
The dysfunctional code:
Code: Private Sub btnFind_Click() If (TxtFind & vbNullString) = vbNullString Then Exit Sub Dim rs As DAO.Recordset Set rs = Me.RecordsetClone rs.FindFirst "[Acronym] = " & TxtFind
[Code] .....
The red highlighted line is where the debugger leads me to. Something with identifying the field? I would like to enable the search procedure to search throughout the entire records rather than just a specific field. How may I write such a line or two?
I have a form that has a subform on it. The main form shows a category of furniture and has custom navigation buttons and a search text box for asset numbers and command button that runs the search. The subform shows the asset numbers associated with that furniture category, sometimes there is only one asset number, in other cases there could be 60. There is a scroll bar to scroll through the asset numbers when there are too many to see in the initial window.
The buttons all work as they should except when I search for an asset number that is part of a category that has too many asset numbers to show in the main window. When this happens the "previous" and "next" navigation buttons do not take you to the previous or next record. All of the other buttons on the form work though - you can go to the first, or the last record, and you can search for a new asset.This is the code for the search:
Code:
Private Sub cmdAssetSearch_Click() Dim rs As Object If IsNull(Me.TextAsset) Or Me.TextAsset = "" Then MsgBox "Please type in an asset number to search for.", vbOKOnly Me.TextAsset.SetFocus
[code]....
I've also attached a picture of what I mean when I say there are more asset numbers than what the window shows.
I currently have a database with a few search forms. I recently attempted to add a box on one of my search forms to search 3 cells of a record for a key word. What happens is when I go to search, say for P0442, it does not bring up all of the records that contain that keyword in the 3 cells I have outlined. If I step down the code in the OR boxes of the query, it seems to work better but then for some reason my other search criteria , (Tracking number etc) does not work. I will upload the database for reference. I am currently working on the Search(View Only) and that is where you will find the query to work on.
I'm having Table with some universities name and i want web link address for all universities. Take university from table1 in column1 and search on google page and return first link of the search page and save into column2...
I have a search form that uses a query to show results of a search, but everytime I press search everything comes up even though I have entered search parameters, even though my search requeries every time and the search used to work before I added new records today. Also when I press the query alone on the navigation pane it asks me for the parameters and then it actually works but it won't when I use my form.
1. I created a form with some search-fields which are related to a query. Then I added a Subform in which I put some more Search criteria (So that I can easily hide and unhide those additional searchfields). It sounds strange but is necessary ;-). Now I related those searchfields in the subform to the same query. When I run that query a window pops up that I should put in a value in all those searchfields which are in the subform. But I told Access that it should display all rows, if there is no value in those searchfields. Just as I did it with the Searchcriteria in the Main form. Do I have to do something special, when I have a query which is related to two Forms?
2. I want a searchfield to search in three different columns. Usually the value will just be found in one of those columns. As the Table I search is very long and has many searchfields and multiple of those will relate to more than one column, is there an easy way to do it in VBA? As I did it by using the "or" field when designing a query, but this seems very slow and unstable.
i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.
i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.
i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.
I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.
I have a search combo box to search for a field on my form. But it just goes to that particular record. The combo box is for client id and it has more than one record. How can I have it return just the records pertaining to the client id choosen in the combo box.
I have a database that uses four forms and each form has it's own table and each form has it's own search button to find a specific record within that table. I would like to use one search button that will look at all four tables and bring up the correct record when the request number is entered. Can I link all the tables to perform this or is code required? Can someone send me in the right direction for how to do this? Give me an example of code if it's required? Thanks for any help I can get.
So basically, what I have is a bunch of words in one memo field, for example:
dog cat cowboy tree flower
To search it, this is the code I have now.
' Check for LIKE Last Name If Me.txtLastName > "" Then varWhere = varWhere & "[LastName] LIKE """ & Me.txtLastName & "*" * " AND " End If
The only problem is what I search for needs to be "in order", for example, if I search for dog, I'll get the table. But, if I seach for tree, I won't because tree was not place first. Can you please help me? Thanks a lot!
SELECT Table1.*, Table1.[Winning Contractor] FROM Table1 WHERE (((Table1.[Winning Contractor])=[Who was the winning bidder?]));
This works well except if the user doesn't captialize a letter or doesn't type in the full company name. Is there a way to change this search to a like search instead of an exact one?
I have a main form with a search command button in the header. This search facility looks for information in a subform. At the moment I can't seem to get it to work.
Main form called Building Subform called LineTypeSub Field its trying to search is called Line
I have built a custom search form in a MS Access 2010 database so that users can find specific records to edit. After entering the search criteria and hitting a Search button, another form opens up that shows the search results. This second form includes a command button for generating a report of the search results.
Right now, the custom search form and the search results form are both working properly, but the search results report is showing every record in the database instead of just the search results. This is true whether I access the report via the command button in the form or the navigation pane. I'm not sure if I need to correct my VBA code or the report's properties.
I have an unbound box on a form and, within the box are 25 strategically placed "X" marks (text fields) named X1 - X25. I want only one of the X marks visible based on the value of two fields, i.e., if field "Impact" = 0.5 and "Probability" = 0.3 then X23 will be visible.
Could someone please get me started with the code to accomplish this?
Trying to setup a conditional format for a field on a form based on conditions from another field.
I have a form with [Field1] and [Field2]
I have a 3rd field called [New SMF]
What I want to do is have conditions on [New Field] so that if the value is greater than Field1 or less than Field2 the background of new field turns red.
I've a question and I hope you can help me out....... I'm trying to use Conditional Formatting Options on a Text box called "Date". I'd like that this box become Red if its value is between value1 from Text box "Start Date" and value2 from Text box "End Date" or Green otherwise (in this way the color change dynamically every time I change the values of Text Boxes "Start Date " and "End Date"). How can I do that? What I need to type in the Conditional Formatting Windows?
On my Database I have used Conditional Formattion to change the colour of the qty to highlight when the qty is getting low however its not as good as I would hope as there are different type of definition of quantity (D of Q) e.g. Each (single items such as a screw) and Roll (such as cord and tape)
Conditional formatting doesnt work well because if I have it as less than 10 the qty is in red, its ok for the each items however not the roll as 10 rolls of tape is more than we would need.
I am just wondering if anyone knows what the code would be to change the colour depending on the qty and the D of Q
All i have got so far is: If me.qty <10 and DofQ = EA then
For example my database consists of a Employee table *Token ID Name AGE Location Division.
Now the users of this table would be employees from different divisions. And i want to create a view for each division for records only belonging to that particular division. And use this view to update records of that division.
Or should i create tables for each division and then give access of each table to the respective division user.
Does anyone know if there is a way in a report to display an entire row in a different color? I'm running a report based on a query and I need specific information to come up in RED. I read about conditional formatting but you can only apply it to a field in a report, but not to an entire row. Let's say I have a group of managers and I need to know the ones that are making more than $50,000 a year. I don't just want the salary to come in RED, I need the entire row (like name, last name, title, date of hire, salary, etc). Any ideas?
Hi - I wonder if anyone could possibly help, I have a list box that is populated by a query, which currently populates the list according to which site is selected within a combobox - what i would like to do in addition is to have a check box which controls how much data is shown, ie, if the checkbox is ticked show all data from April 1st onwards, if not ticked to only show the last 12 weeks (84 days)
I have tried to acheive this using the code below:
[Forms]![frmPccAnalysis]![cboSelect] --is used to select the site--
IIf([Forms]![frmPccAnalysis]![chkFilterLimit]=-1,(Between #01/04/2006# And Now()),(Between (Now()-84) And Now())) --is what i am trying to use to either restrict or show all data--
when i run the code i just get empty fields, if i manually enter the "Between #01/04/06# and Now()" statement in the criteria it works fine, just not with the conditial checkbox. Can anyone please point me in the right direction?
1. A Homeroom table which includes student id, academic year, and homeroom. 2. A Student Grades table which includes student id (linked to Homeroom table), term, academic year, progress grade (15 pts), and progress grade (A-F).
The contents of these tables are imported from excel, and that works fine except for one thing: in order to keep the field [progress grade (15 pts)] numeric, I had to put a 0.0 as a grade for any student who got an "I" (Incomplete) or "N/A" as his or her progress grade.
The problem arises when I want to produce an average progress grade for the student for that given term/year. How do I not include the 0.0's of students who got I's or N/A's?