Hello,
I have read through the forum for an answer to a frequently asked question, and have yet to find the answer. Question. I have a form that calculates two different ways, =[Time]*[Labor Hr Rate]. works fine, and then there is the other one.=[Material Cost]+[Freight Cost]+[Travel Cost]+[Total Labor Cost]+[Tax]
All date is typed into the form, but the sum of the calculation needs to be stored in the table. I can not get this to happen.
I have read all the forms saying that "DO NOT STORE THIS IN A TABLE" But, I want this to happen. All I need to know is how to get this value to store in the table. The calculation will never change, so that is not a problem, and there is allready over 10,000 records in the database. So just please, if you can, tell me how to get this data into the table.
If you want to use a "DoCmd.RunSQL "INSERT INTO" command to insert data in a table and the data to insert comes from a table and a form, could this be done in one pass?
So...writing a record wit 4 values from table1 together with a additional value from a textbox in table2 as 5 values.
How to update data from one table to another table using form.
I have data coming from design team in Database 1 and using form i want search data and assign the job to a person and store it in the database with his name. I have to do this because database from design team is read only.
I have three tables that contain different columns but linked by a primary column call Name. I want to create a table where all these different columns in the three tables join to form a master table which can be updated regularly either through the master table or the smaller tables. The master table also has the primary column as Name.
If I update the master table with records, it should update the respective linked table and vice versa. I also want to link these tables to my SharePoint site.
Note: except the Name column, none of these tables have any other columns in common How do I go about this?
I have two tables (Access 2010). One with a list of names (List1) and another with a very similar list of names (List2), but they differ in very small ways. For example, List1 might have John Smith, and List2 would have Smith, John L.; and Smith, John. List2 also has a unique ID associated with these names that I need to append to List1.
I need to design a form that will allow me to look up names in List1, and have it return all names that are similar in List2. I then need to be able to choose with record in List2 matches with the List1 entry (based on a few other columns in List2, such as birth date) and have the form add that unique ID to the List1 record.
I have three tables: Vehicles; Vehicle Reallocated; and Vehicles Retired. I have a form that runs a query to find all the info in the Vehicles tbl that is not "Retired", not visible in the form. I then have the option to toggle to a Reallocated or Retired form. When i toggle to the reallocated form, i have the like fields in that table (ie Van #, Vin, Make etc) pulling the info from the hidden subform with the vehicle query, so i do not need to fill in repeat data. However, when i add a reallocated date and the new clinic that vehicle is for, i get the record ID for the vehicle reallocated table as expected, but when i save none of the data moved over from the query saves in the record?
How to get all the data on the reallocated form to save?
Here is what I am trying to do: I have form, and a table which is created from this form. The data is entered a second time using the form to make sure there are no discrepancies.
Any easiest way to implement this? (create a new table (which is duplicate), and then compare them?
1. I have a table which lists all of the equipment we use in our company and would like to use it as a template in a form so that users can select a checkmark if the equipment is being used that day. The checked items would then be used to populate another table which records all of the equipment the user has selected. I thought the checkmark method would be best so that the user can scroll through the list of equipment and select multiple pieces for the day. The reason I don't use a multi-value field is so that the user can also enter quantity and hours of equipment used in the same table when they scroll through the list.
2. Once all of the equipment pieces have been checked, I would like the user to be able to click a review button which would navigate to the next form with all of the selections for the day. This new form will have the option to go back to the first form if any corrections need to be made. And also have the option to submit the results.
3. Once the user is finished with their selections, the user can then select Submit which will finalize the recorded equipment table and clear the checkboxes and any inputs from the equipment template table (without modifying anything) so that it can be used for the next day and so forth.
New to Access! I am creating a quotation database where a new company name will be entered. In 1 form a pick list of products which I then want to go into another table associated to the company name which can then be queried and displayed in a report for printing the quotation.
I will create a form to generate a new quote, enter the company name with a display of quoted items (QuotedItemsTbl) (Query QuoteID).
On that Form i want to have a button to 'add items' on that form be able to pick from items in StockTbl which when selected and button 'close' copy the data to QuotedItemsTbl
Any advice to a enthusiastic buy novice newbie much appriciated.
I have a table called "WorkRequest" consisting of some fields such as WR Number, WR Date, WR Time, WR Requested by and WR Work Requested.Once a work request is completed, I want to open a form called "JobCards" from a table called "JobCards". When I click on the pulldown box for the Job card number, it lists the "WorkRequest.WR Numbers" which is what I want.
My problem is: As soon as I select the WR Number and it displays in the jobcard form in the JobCardNumber field, and I press ENTER or TAB, it must automatically populate the corresponding fields on the JobCard Form. These fields are defined identically in bot the "WorkRequest" and the "JobCard" tables.
I have a Lost/Found property database which we use to keep record of the lost/found property and it is working fine.
As per our organization's policy, we keep the item(s) for up to three months in which if it gets restored to the owner then fair enough otherwise after three months the item(s) can be claimed by the "Finder". But for this very purpose we issue the Finder with a "Claim Receipt" which he/she should bring in when claiming for the item(s) after three months period. Therefore, It's just the right time to upgrade the database to a more professional level.
The database has one table and two forms.
One form (LostFoundForm) is visible to the user in which they enter data, this form has two sections; Item(s) & Finder's details and the second section is about Restoring details.
However the second form (ClaimReceiptForm) is hidden to the users (for manual data entry) and has only one section which is exactly the same as the first form's first section, i.e., Item(s) & Finder's details. This second form takes the data automatically from the first form because the table behind them is same and fields are same (please see attachment). Up to here it's all working fine.
I would like to introduce a Checkbox or a CommandButton in the LostFoundForm which when we click should pull up a msgbox asking "Do you want to print the receipt for this item(s)?" with a Yes/No option. On clicking "No" it should, obviously, settle down but on clicking "Yes" it should print the "corresponding record" from the ClaimReceiptForm.
I have a form based on a table called tblListMaster and I want to allow users to open up another form showing all the members of one of the entries in that table so I have added a button called 'Show List Members'.
The list members form which I then want to bring up is also based on tblListMembers (it's a master-detail form). When I hit the button to open up the list members form I get an error message saying that the table is already opened exclusively.
I can understand why I get that message so I thought I would be cunning and create a dummy form which I open up, passing in my list id in the openargs (at that point I also close the original form) and then from that dummy form automatically open up the master detail form and close the dummy.
Code in List Master form
Private Sub cmdListMembers_Click() ' open up the list members form
Hi, I'm new in Access and facing a problem. Hope I’ll make myself clear.
I've a table "members" and I've created a form "member_form" based on this table (members).
1. I want to binde my form "member_form" with my table "member" so that the new data I store in form, automatically sotres in table. How can I do that:confused:
2. In form, I've fields "Member_ID" and "Member_Name". I want that when I type member_id in "Member_ID" field, the member name in "Member_Name" field come automatically. How can I do that???:rolleyes:
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in (Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table EstimatesandParts_ID : Autonumber Estimate_ID : Number Part_ID : Number
Parts - Table Part_ID : Autonumber PartNumber : Text (not a number due to some part#s have letters in them) PartName : Text Unit Price : Currency Description : Text
Estimates - Table Estimate_ID : Autonumber InvoiceNumber : Text (again can have letters in it) EstimateDate : Date/Time EstimateTime : Date/Time Employee_ID : Number Customer_ID : Number ProblemDescription : Memo
Customers - Table Customer_ID : Autonumber FirstName : Text LastName : Text CompanyName : Text Address : Text City : Text Province_State : Text Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName LastName CompanyName Address City Province_State Postal_ZIPCode
SF_Parts - SubForm Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box Control Source - Part_ID Row Source Type - Table/Query Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here
I have a table called Inventory (table1 - PK=INVID) that contains all inventory ID numbers and descriptions. I have another table called Inventory Transactions (table2 - FK=INVID) that gets updated through a form. When a new transaction is made in table2, I want the transaction amount to get added or subtracted to an OnHandQty field in table1. I tried having table2 (transaction table) as the main form and then table2 as the subform, but I couldn't get table2 to update.
I've run into a bit of a problem with the database I'm working on now. I have a form where the user inputs a date range (start date and an end date). Those dates are used to filter a set of records. Each record has a "submit date". All records with "submit dates" that fall between the user defined date range are displayed in a report. Right now I have the date range saved in a table (which really should only have one record). That's problematic though. I think I need to ditch the table and code the dates so that when the dates are input, there are date objects which are given the values of the input dates. Therefore, at any one time in the database there is only one start date and end date in memory. Each time the user wants a report from the database, he will be prompted to input the date range. Unfortunately I don't know how to do that.
(original thank-you below...) sorry, more stupid questions: I want the underlying table for the mainform to have the little column with the "+" you can press to see the related subform data. I created the two tables and then created a related form and subform, but the underlying table does not show the "+" column)??
HUGE thank-you for the response MStef - the example was helpful ! I will start again with 2 tables instead of one.....(I had thought i wanted to have all the info on one underlying table for viewing and printing purposes, but, I guess its not necessary). Thank-you! SR
I thank you in advance for considering this inquiry.
From within a Form.field (based on a master table query), I desire to trigger two events; one before update and one after update.
This function will serve to document specific form.field value changes to a "log" table for review prior to being committed back to the master table.
What I'm looking for are functions, which I can use in a Macro or VBA code to facilitate a field read and copy before change and a read and copy after change triggering.
I have created a AutoForm: Tabular and I have got 6 columns. I enter a product code into the 1st column, and when I tab off this column it runs the following code to fill the next 2 columns:Private Sub Product_Code_AfterUpdate() Dim Chk As Variant Chk = DLookup("[description]", "[dbo_tsapmaterials]", "[product] = [Product_Code]") If Chk <> "" Then Me.Description = DLookup("[description]", "[dbo_tsapmaterials]", "[product] = [Product_Code]") Me.BUOM = Trim(DLookup("[unit]", "[dbo_tsapmaterials]", "[product] = [Product_Code]")) Else Me.Description = "Incorrect Material" Me.Product_Code.SetFocus End If End Sub
The problem I have is that when the product doesn't exist in the table dbo_tsapmaterials & the Description sets to "Incorrect Material", it doesn't go back to the Product_Code column. Is there any way this can be done, or is there a better way to do this?
Hi: this is my first post to this forum. I am amazed by the knowledge of this site. Hope you can help me with this problem The question is: Is it possible to fill in a table with a form like this?
I made a table with the following fields: ID NAME Column Row
I have a form that has 7 fields: NAME and 6 text boxes. The 6 text boxes referes to a small 3x2 grid. I have to input an ID number on each textbox. The form looks something like this: NAME:________ -- A - B - C 1 [ ] [ ] [ ] 2 [ ] [ ] [ ] <----------------Textboxes!
I will like to create a table using this form. For example, if I type the number "123" in the location A1 and "111" in A2 and the name of the project is "NEW", I will like the table to look like this:
NAME ID COLUMN ROW NEW....123..... A.......1 NEW....111......A.......2
Hi, I would like to know how to use controlsource to get data from code table into my existing form which is using member table. :confused: :confused: :confused:
