Help With Updating Text Boxes On 2 Different Forms
Jul 7, 2006
I have similar text boxes on two different forms. On the first form when I add a value and click the add button it automatically submits that value to the second form. However, on the second form when I select a value and click add, it deletes the previous value given by the first form. I have written code that allows the user to input more than one value on the second form, which works fine.(The previous values do not get deleted) I want to write some code that allows the user to submit a value on the first form, and that value remains on the second form's text box even when the user adds more values on the second form. Also the values are inputted to a table.
One previous suggestions was to put field2=field1 & field 2. However this does not work.
Any suggestions would be a of great help. I am pretty new at Microsoft Access. Thanks for the help
I have a form where I type in the time a person starts a job. The format is Medium Time. I also have a box where I type in the End time for that job. Also formatted in Medium Time. I have another box that is for if a break happens during that job to return the value 10. My formula for that box is: =IIf([Start Time]<"9:00 AM" And [End Time]>"9:10 AM",10,0). The problem that I am having is that it only works when the time is in the 9:00 AM to 9:59 AM time frame. I need it to work where if a person starts at 6:00 AM and gets done at 2:30 PM to return the value of 10.
I have a form that contains a combo box (cboEmployeeName) that pulls data from a query and populates three text boxes (Work Area, Last Name, First Name), This part works fine. Because the text boxes are being populated by the Combo box, they are not bound to the record source tblTrainingSchedule). I need the info that is in the text boxes to populate the respective fields in the record source.
I tested by adding "=tblTrainingSchedule!WorkArea=[cboEmployeeName].Column(3)" (column 3 is the work area) to the "after update" control but it does not populate the data.
I've looked through the previous posts here but can't find what I'm looking for (probably because I can't think of how to phrase it). Basically I've got a text box that allows for entry of the item cost, then a text box called Quantity and another text box that calculates the total cost based on the quantity. Fairly straightforward and works, well sort off anyway.
Basically the text box does not update as soon as the quantity amount has changed. You seem to have to either go out of the form or click on another field.
Any ideas? It's probably simple but it's been driving me nuts now for ages. Any help would be grately appreciated as always.
I am trying to take text from two different text boxes on a form and place into another text box on the form. I want it to also update the table with this new text.
Example: fname, lname, fullname are text boxes on a form. when user enters fname and lname, I want the two strings/text to be added together and placed in fullname while also updating the table with the fullname text.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click() DoCmd.FindRecord Me.BarTxt.Value, , True, , True CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer" End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I have a form with numerous text boxes, combo boxes etc. I want to make two of the text boxes active (visible) only if the value entered is "Yes" in the text box above. Otherwise, if the value entered is "No," I want these other text boxes to remain hidden. For instance, if the user selects "Yes" the DVD is out on loan, I want three other text boxes to appear so that the user can enter the borrower's name, date borrowed, and date returned. Thanks!
I have multiple sub forms and want to add specific text boxes of different sub forms into one another sub form. Then all sub forms are incorporated in one main unbound form.
I have a form that has 7 text boxes, each of which contains a time value (hh:mm)
Two of them are to be permanently totaled into one text box (lets call it Rate1), and the other five are to be totaled into another text box (lets call it Rate2) - BUT, if the value of a combo above each one of the five text boxes is set to 'BH', I want the value to be totaled in with the Rate1 totals.
I did think about doing an After Update event on each of the five textboxes where the value of the totals text box is updated by doing the current value + the value in the textbox (and the totals text box that is updated is dependent on the value of the combo) - but that idea landed flat on its face upon the realisation that if a user entered a value, then decided to change that value, the old value would not be deleted from the total.
I am trying to create a login form with the following three basic fields:
txtUsername cboUsertype txtPassword
I would like to be able to populate cboUsertype with User types associated to the user I type into txtUsername. I have found many useful tutorial on the web on login procedures. How ever I hardly found anything on how to populate a combobox after updating a texfield. It bis more than a week that I am trying to find a solution but until now I have just been . I would be grateful if you could provide me with either a link on the web or a vb code to make it work.
i have build a small project using access 2003 and vba code one of the forms contains sub form the main form contain the main data about school and in sub form populate different > textboxes for details about classes my problem is how to fill these text boxes in this sub >form for different grades depending on id of main form and how can i change the values and >moveing first or next buttons these are simple picture
I have five textboxes for husband with the values typed(HustxtAddress1, HustxtAddress2, HustxtCity, HustxtState, HustxtZip). I have five more textboxes for wife. I have a combo box asking whether the spouse's address is same as the husband - with yes or no. If "Yes" is selected, the text boxes for wife is auto filled with the same values of the husband. I tried with combo box change event setting HustxtAddress1= WifeText address1, it fills only the first field and other fields are empty.
Code: Private Sub Text74_AfterUpdate() Me.Text1280 = Environ("UserName") If Me.Text74 = "MACGH" Then Me.Text89 = "PureGene" Me.Text85.Value = Date End If End Sub
Is there a way to insert a line of code in the above that would add the next number to a 2 specific textbox's (Text103 and Text509)? Maybe if a table was created with all possible values and then the code would reference that table. There is probably a better way though. An example would be, if record 1 is A1 (in Text103) and 1 (in Text509), when record 2 is entered Text103 would be A2 and Text509 would be 2. Record 3 would be A3 and Text 509 3.
I am trying to sum the row in a access form. There are 3 text boxed called TXT1, TXT2, TXT3. I have added an additional text box and typed the following txt;
=([TXT1]+[TXT2]+[TXT3])
Instead of totalling the row it just puts the number together. For example TXT1 contains 1. TXT2 contains 2, and TXT3 contains 3 so the answer should be 6 (1+2+3) but it shows 123. I have tried putting SUM in front but that gives me the total of the whole column not just that row.
I want people to be able to search, or jump to a record by the PO #
I am hoping to just do it in the form, and by that I mean, the user is on the Purchase Order form and needs to look at a previous Purchase Order for editing, deleting, etc. and to just type it in the text box, hit the search button, and there it is.
I need to populate a text box with data from a single cell contained in a table.Im hoping to use two combo boxes that when selected will select the cell. The combo boxes select data sources from the same table. One combo the row the second the column. One combo is already in use and populates several fields in the form. In the same form I'd like to place the second combo and beneath it have a text box that will populate with that cell detail.
I want the calendar to show the date in the field [Next Payment Due] - whenever this value changes, the calendar date should change accordingly.
I want the calendar to be assigned to a text box (txtCalDate), so this would also contain the date of [Next Payment Due].
However, If the calendar date is changed (on the calendar), I want txtCalDate to show this date, but [Next Payment Due] to stay as it's original value. Next Payment Due can only change the value, but not be changed itself.
So I presume VBA would be needed to say when [Next Payment Due] is changed, make calendar this date. And then to simply assign the calendar to txtCalDate so if calendar is changed, this will change with the new date.
2 Forms 1) - Employee Details (source control is "QEmployees Extended") 2) - Employee List (source control is "QEmployees Extended")
in Form "Employee Details" there is field named "HireDate" this field is also found in the table (records) "Employees" and "QEmployees Extended".When Form "Employee Details" is ran the "HireDate" appears as it should in the "HireDate" text box.
What I want to do is add a unbound text box to Form "Employee Details" named "txtYrsEmp" (Years Employed). and perform a calculation that will take the "HireDate" (date) and compare it to "Todays Date" and come up with the number of years employed rounded by 2 and show this result in the unbound text box called "txtYrsEmp"
Now I did a Qurey just to see if I could calculate what I wanted- "QYrsEmp" where in the first column I entered in the Field row (top) Expr1: EmployeeID from table Employee and in the second column I entered in the Field row (top) txtYrsEmp: Round(DateDiff("d"'[HireDate],NOW()/365.25,2))
Now the query returns the exact results I want so I know the calculation is possible at least here in the query.
My database has a text field "Status" where the text is either, A, W, C. There is a form to update this field; currently it uses a standard Access created text field. The users want a checkbox which will show up as checked when the status is W, if the status is anything else, the checkbox will be blank. If the user clicks the checkbox within the form the status will be changed to W.
If [table.status] = 'W' then checkbox = 0 else checkbox = -1