Apologies if this is an obvious one but is it possible to hide this:
"Record:1 out of 34" and the arrow buttons at the bottm of a form(s)?
I would rather use my own Next Record and Previous Record buttons so it would dieal to disable/hide these arrow buttons.
Many thanks for your assistance in advance,
Paul.
Hi,
Trying to remember how to hide/disable buttons on a form based on the users security levl they have. :)
I need to disable or hide the restore, minimize and close window buttons found in the top right hand corner of a form.
I navigation buttons that controls open, close etc already set up.
I would like to disable the Navigation Pane completely, based on the security level of the user that logs in, of course.
I have code that checks their level (I'm an "Admin" and everyone else is a "User"). If they are a user, then it hides the ribbon and minimizes the nav pane. If the login is mine, it enables everything.
That works, but the only problem is that the user can just maximize the Nav Pane on their own and access all the tables, and I don't want that. I can't find any code that completely disables the pane.
I have this code connected to my login button on my login form:
Code:
If Security = "User" Then
DoCmd.ShowToolbar "Ribbon", acToolbarNo
DoCmd.NavigateTo "acNavigationCategoryObjectType"
DoCmd.Minimize
Else
DoCmd.ShowToolbar "Ribbon", acToolbarYes
DoCmd.NavigateTo "acNavigationCategoryObjectType"
DoCmd.Maximize
End If
I can go to the options menu and disable the nav pane completely, so I know since only I have access to the ribbon, I could always go in each time and recheck the display nav pane option on that menu. But, that could be a little bit of a pain having to do that each time.
Also, I know I could finish the design and convert the DB to an MDE, but since my DB isn't broken up into a front/back end, I have to access that same DB everyone else uses, and if any changes need to be made, I don't want to have to use my backup, transfer over the changes any user made to the records, and then reconvert it back to an MDE each time.
If it's possible, I'd like to do all this using VBA. If they aren't an ADMIN user, then disable everything for them, but if I login, enable everything for me.
How do I hide or disable the File tab in Access 2010 on my front ends?
The file tab being present allows end user to get into Privacy Options and Printing. Printing is okay if I could disable the Privacy Options for end users, then it wouldn't matter if they have access to the File Tab.
Possible very serious security issue!
I have a form that has a listbox and a subform. The listbox lists names of events, start date and end date. The subform bellow reveals names of participants to the event that is clicked in the listbox. Against each participant's name is a button to delete the participant.How can I hide or disable the delete button if the start date of the event is past?
View 1 Replies View Relatedis there a way to disable the new record option (>*) at the bottom of the form...i want my users to be able to search all records through the form sometimes, but not add any new ones accidentally (or intentionally) while doing so. :confused:
View 2 Replies View RelatedHi,
I am currently working on a database and I'm using a form to view the records. A standard Access behavior is to show an empty record (new record) as the last one. is there a way to disable this "feature". I would like my form to display only the records, which are really filled with data and not show the blank one at the end??
Thanx in advance
Luke
I got a form / subform relationship.how to locate the bottom record, when the user after some queries input at the main form. I desire to display the bottom end record (EOF), instead of some sorting and display the last record at top of the subform!!
View 11 Replies View RelatedIs there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
View 2 Replies View RelatedI created a report that only has gridlines around the outside border of the entire report (rather than around each record). I want the grid line style on the last/bottom record to be solid so it boxes in all the records. When I change the "Gridline Style Bottom" for the records, each record has a bottom gridline rather than an outside box around all the records.
View 1 Replies View RelatedHi again,
One last one that's been niggling me - I just can't fathom the code... I bet it's very simple...
I have a Form ("frmJobSummary") that shows all the jobs for a customer - the customer is selected and the Customers ID is stored in a Control called "CustomerID" (It's just a number)
I have a button that opens up a new form... "frmEditJob" This allows you to add a job to a customer. I know how to get it to open up as a new record... but...
How do I get it to open up as a new record (or job) for the customer selected on the form "frmJobSummary"?
Here's the code so far... all it does is open the form with the Current record. :(
Your help is, as always, most appreciated!
Private Sub OpenNewJob_Click()
On Error GoTo Err_OpenNewJob_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmEditJob"
stLinkCriteria = "[CustomerFK]=" & Me![CustomerID]
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_OpenNewJob_Click:
Exit Sub
Err_OpenNewJob_Click:
MsgBox Err.Description
Resume Exit_OpenNewJob_Click
End Sub
I have a form which my company wanted that each single record should be printed from form. I made a print record button and put code to print single page or record. However as a natural habit people go to file > print to print which leads printing all records so 1000's records start printing. Is there any way i can hide print button. File >Print button.
View 1 Replies View RelatedI have a continuous pop up form which, at the most, will contain about 10 records. The ten records take up less than half the screen space - but there is a bottom half to the form - even though there is nothing there. How can I get rid of the unused space on my form?
View 2 Replies View RelatedI have a table for Contact history.
All data ca vary except for two fields The ID wich will be multiples of and the election date.
I want to display the last contact info we have how can I do this.
Hiya,
I've inherited an Access 2003 database, a rather complex one. The database has a login, with the credentials stored in a table which I can view (minus the pass, which is masked). Of course, for security reasons, I shouldn't be able to just add a record and create a new ID, in essence bypassing all security. As such, the table with the user records does not permit new records to be added. What steps need I take to add new records, the option being greyed out in the interface, no new record bar available at the bottom of the table.
Any insight is most appreciated.
Slawek
Hi there I found alot of nice tips here, thanks for that :) But I havent found exactly what I am looking for. I will keep searching but I thought I would post as well.
Here is my problem : I have to design a form that works like an old application form written in VFP7.
Basically a combo box chooses a customer, another combo box filtered by customer chooses a job. A third combo box filtered by Jobs chooses a stock.
There is a subform linked by Stock_ID that displays details of the stocks, amounts, locations, etc...
I want to limit record navigation to these combo boxes. Right now even with navigation buttons hidden and limiting tab cycle to current record; a user can use the mousewheel and page up / page down keys to change the current record in Stock table and thus changing the details in my sub form.
Does anyone know of a way to stop all record navigation unless I explicitly move the record pointer via code behind the combo boxes?
I will keep looking around here and will likely play with the Current event to reverse any changes made to the record pointer but it does not seem the best way to handle this.
Thanks much :)
ps Im using Access 2003
I was wondering if there is a way to hide 1 record from a query
say I have 3 user accounts and on a form I only want to display 2 of them form the query,so the other record is still present but cant be deleted by accident or viewed
Is it possible to just hide a record? My form is based on a query so I know I could remove the record that way but I also have a box that calculates a average time, so the data that is produced by that record still needs to be taken into account. I want to hide some records pureley so the user dosent have to keep scrolling thriugh loads of records. Is it possible to do this?
View 9 Replies View RelatedI have a continuous form "components" where the data is added by a query. There is no need to manually add records to the form, I just want to edit certain fields.
Is it possible to hide/disable the blank "new record" row at the bottom of the form?
I tried setting the form's "Allow Additions" property to no, but the line still appears.
Thanks for your help!
Frank
Hi Everyone,
I want to try to restrict the user not always changing the record, so i need a Disable combo box command. And i did try it by using "Name.Enabled = False" after user select the value from the combo box, but the program won't let me do that because of the record is on focus. So what can i do? I only have an idea of after the user select the value from cbo then jump the cursor immediately to the second column, but anybody can tell me how to do that?
Thanks alot!
Regard,
alex
can i hide a record when i look it in a form. For example i have a table which has 100 records. Can i make some kind of a check box and if that check box is checked to make the record disappear. I want the record to be in the table but i dont need it in the Form.
View 14 Replies View RelatedSuppose I have a customer database. Is there a way if I click on a button, it will create a new record and copy some of the info from the previous record?
View 1 Replies View RelatedHello once again,
I am wondering how I can display information on a form that is not of the same record source without using a subform.
Right now, I have a form setup with qryAll as the record source which provides the information to a listbox i have setup on the form. When I select something in this list box, I want to display information related to it from a table based on a CenterID. Is this possible to do? I won't need to edit the values, I just need to display them into a textbox or something.
Jared
Hello Everyone,
Before I pose my question I would first like to applaud and thank this forum for the excellent and timely help it has provided me so far. The assistance I have received to date, from you as members, and via the search facility has been extremely helpful particularly as I am new to this type of stuff…
My question is this...
I would like to disable users from selecting the 'Edit - Delete Record' facility from my main form upon its load. From searching the various forums I found a method upon which to disable the whole 'Edit' menu but not the specific 'Delete Record' function. Please accept my sincere apologies if this has already been posted but I simply cannot find it readily via a standard/refined 'search'. It might be the fact that I am phrasing the question incorrectly?? I don't want to severely restrict my users by disabling/hiding the whole menu but would rather limit them to accessing this option via a password protected command button?
What I have found so far.
Private Sub Form_Load()
CommandBars("Menu Bar").Controls("Edit").Visible = False
End Sub
Any assistance/guidance would be very much appreciated
Kind Regards – Best wishes to all of the registered site members
CarolW
:)
How can i disable back button of record selector, i dont want my user to fiddle with the data which is already entered.
View 3 Replies View Related