Hello,
I would like to hide some of the tabs of my tab control on load, and make
them visible only later via another event.
How do I hide individual tabs vs. the entire tab control?
Thank you.
I have on one of my forms a tab control with 5 different tabs on it. Each of the tabs has a different set of fields but all from the same table. I was wondering if it is possible to hide a tab if none of the fields on it have any data in?
So for example tabs 2 and 3 have data on them but tabs 1, 4, and 5 dont. I would want to hide tabs 1, 4 and 5.
i have one form with 4tabs with name frmMain and one button open form frm1.
if i close frm1 i want open frmMain to 2tab
can i do this?
thanks :p :p :p :p :p
I have setup a tab control with three tabs. Can I use a command button placed on tab #1 to switch the focus to tab #3? If so, how?
View 1 Replies View RelatedI have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
View 2 Replies View RelatedI'm using a navigation control with 3 tabs. I would like to open a specific tab after the user login. I tried this but it does not work:
NavigationControlName.Tabs.Item("tabNameToOpen").S etFocus
I have tried:
Me.NavigationSubForm.SourceObject = "FormName"
then the form change but the tab selection no!
I have a music database in which I keep track of my CDs and how many times I've listened to them. I have a report that uses grouping to show me the total listens for each artist for each year - the totals are in a group footer, with nothing in the detail section of the report. It looks something like this:
-------94-95-96-97-98-99-00-01-02-03-04-05-06-07-08-09-10-11-12-13-14
BAND1--00-00-00-01-13-04-03-00-01-00-01-03-10-16-04-04-01-00-01-03-00
BAND2--00-00-00-00-00-00-00-33-31-14-15-07-02-00-02-01-11-05-01-00-01
(The dashes are blank spaces.)
The first line is the column header showing years (last 2 digits for space reasons).
The second and subsequent lines are created in the group footer section, first is the artist name, then the Sum of listens for all titles by that artist in the year given ([Sum of Listens1994]).
This report works perfectly.
Here's what I want to do, and I can't get it to work:
In the above lines of data, let's say that the earliest title for BAND1 is from 1975, and the earliest title for BAND2 is from 2001. My yearly counts start in 1994. Therefore, there were listens for BAND1 prior to 1994, but there weren't any listens for BAND2 prior to 2001.
GOAL: Instead of showing "00" on the BAND2 line for years 1994-2000, I want them blank.
I've put a conditional format code in OnFormat for the group footer section, telling Access to turn visibility off for the text box control ([Sum of Listens1994] etc) if the [Earliest] field (which contains 2001) is greater than the year being displayed (1994 first, and so on). This, which seems like it should work, makes no difference. Oddly, if I put a F9 code break on the If statement, it never breaks, which makes me believe the code is never even being executed.
I do have prior experience with controlling field visibility in forms and reports, so the concepts aren't new to me. I feel like the big difference with this one is that it's in the group footer section rather than the detail section. [Access 2013]
I' ve created an index (catalog) for the books in the database using a tab control and the code:
Private Sub TabCtl21_Change()
If (193 + Me!TabCtl21.Value) < 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(193 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
'for english characters chr=97
If (193 + Me!TabCtl21.Value) >= 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(194 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
If Me.Recordset.EOF Then
MsgBox ("There are no books for this letter!")
End If
End Sub
It works ok but please take a look at the attached image to see what is happening after clicking two or three times the index letters.
After the tab's caption is "erased", if I pass over the mouse is being corrected.
I tried the repaint and refresh commands but neither worked.
Can anyone help?
I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
View 2 Replies View RelatedI have a series of 7 separate Access 2010 programs that are designed to run under the control of a scheduler, and they must always finish. Errors are trapped and logged but mustn't stop the processes completing.
What I'm trying to do now is to create a single master control program that runs each individual application, one after the other, in order. And each individual app cannot start until the previous one is finished.how to call a separate Access program and know when it has finished.
I have a database where I record grades for my students. I would like to create a macro so that every time I record a grade as an "F", the student will receive an email that will contain an attachment of their scores. A lot of the information I want to include in this email is in several different tables. So to make it easier, I have created a query that lists the following:
Students name (SName)
Student's email (SEmail)
ID# of the form I use to record their grades (ID)
ID# of the studen'ts work (WorkID)
Date of their work (CreatedDate)
Date I graded their work (AuditDate)
Grade="F" (Accuracy)
How can I create something that will automate emailing of this information--to the individual student with only their information? I am using Access 2010. If I can't automatically send the emails, I would like to create a button in my audit screen that will send a report containing that student's information to them.
I have created a database that generates a report with customer debts. I have a lot of customers and in a report each page is a different customer with individual debts info. What i would like to do is to create a button and distribute individual report page as pdf to individual customer by email. I'm using Lotus notes. I have searched the forums i found something but it was not what i was looking for.
View 1 Replies View RelatedI'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
View 1 Replies View RelatedHi,
refer to the (record.jpg)
the whole record is identified as " rst.RecordCount " ( red color box).
how to identify each individual rows ( blue color box)?
Okay, my first problem is solved...Access now stops me from entering a phone number that is already entered...so I'm a happy camper...thanks again to those who helped :)
now I have my next problem, I have 8 columns, each column has phone numbers and I've separated them into what the first digit of the phone number starts with...so columns 2 to 9...
now I'd like to sort each individual column so that it puts the phone numbers in numerical order...the only option I find for sort sorts all 9 columns as if they were one column and then everything is out of whack and mixed together...sorting like that works fine in excel...what's the trick to get Access to do the same thing?? Thanks a bunch :) Rosey :confused:
Hi everyone.
I have a pretty basic database with about 8 tables linked together.
The database is going to be used for keeping an electronic record of claims for upto 5000 people.
I have been asked though to have box on the menu screen which shows both the number of claims and the number of batches (where the claims are put)
All i require really is a way to count each individual number in a coloumn
EG
abc123
abc123
abc124
abc125
number of batches 3
any ideas?
Kev
I have a continuous form based on a query. I would like to have a button or control that performs some command on only one certain record. In other words, the user sees the record he wants, clicks a button and it changes the value or changes the color. When I add a button to the form, it appears next to each record and performs the same command to each record. I have tried different controls, but get similar results with each one. Even a single form seems to do the same thing, but on different pages.
Am I missing something? Or maybe I am not following the concept of the form.
hi iam new to this forum this is my first post , i'am trying to design a student database and i have designed it just want to know how to add different tabs to the view and how to add button/pull down menus to that certain tab when i try to add buttons the go ontop every tab and i can't figure out how to rectefy this any help is app , if you dont know what i'am on about let me know and i will email the database to you and you can see what i mean , thanks ccbup4it
View 4 Replies View RelatedHi Gurus - is it possible to have a Tab form within aTab form, i tried it with Access 2000 cannot seem to get it right
arrh
I'm sure this is here somewhere but I just can't find it.
I have a form where a selection of suppliers are selected, I then want to email each supplier a report attachment - headed up with their particular details - for them to complete and return.
I can use the SendObject to send one email with all reports attached, how do I split it up? Can I split it up?
Hi I'm a teacher and have to set targets for classes, I have created a database which allows me to input targets for the classes. I now need to then display the class target for individual pupils in a new layout. I am sure there is an easy solution and I am looking at the problem from the wrong direction. Thank you for any help
graham
Man I thought this would be simple, but it quite clearly isn't!
I have a .csv file that contains around 250 email addresses. I simply want to import these into an Access table, each email creating a new record!
NO using the import function only seems to allow you to import data as long as each separate piece of data is on field in a record! I understand whent this might be the case, but why the hell can I not import it so each piece of data is a separate record in the table!!!!!!!!!!!
Please note I understand some sort of complex query may do it, but I am not that experienced with that yet and so don't know how it's done!
Please can anyone offer a simple solution? From where I am sitting, there does not appear to be one!!!!
Thanks.
Hello Everyone,I am trying to perform a sum of records for the table belowSeatType| Ext rent | |Internal rent | Work Transfer 2 2VendorOther 2 3LOB BRF GTI BRF 2 5Displacement so that when I run the query I get the following followingSeatType| Ext rent| |Internal rent| | Total |Work Transfer 2 2 4VendorOther 2 3 5LOB BRF GTI BRF 2 5 7Displaceme What I mean is that from the first table how is it possible to get the results below. The query would generate a new column and place the sum of the data in the each row(record) in the same row in the total column. I would be really grateful. Have been bashing my head all day over this. PS I dont know any VBA. Is it possible without VBA?Thank you.
View 5 Replies View RelatedHi all - new here - hope to get some help :)
Situation: I have a bunch of individual databases (approx 70) - each holding one table called "Meter" with some GPS reads and additional information about the GPS point.
Am looking for solution to create one big database file holding all GPS reads.
One idea i have is linking all tables into a new database and run a create table query and then an append query.
Is there a way to somehow have the one append query run automatically on all existing linked tables (remember approx 70 tables so i really want to avoid of creating 70 append queries ;) )
To make it more complicated: data sets in the original individual databases could be modified or new data could be added. From what I know linked tables are updated but is there a way of keeping the my big, newly created (appended) database up2date automatically as well?
Hope it all makes sense?
Thanks a lot in advance
Regards from Ireland
My database records order details for analysis. I have created a form to monitor individual trends in orders placed by my customers. As we supply bespoke items each customer has a list of products which they alone purchase, i.e we do not supply stock items, each item is specifically for one customer (they can then buy the items on a regular basis). The products are assigned to a customer in the products table.
The Analysis form I have created displays the customers name and two graphs. The first graph shows total sales each month, this graph updates as I navigate through the records (i.e. a different graph is loaded for each customer). The form also contains another graph, this is where the problem lies! This graph shows orders of the individual products, controlled by a drop down list containing all the products we supply. I need to limit this list to only show those products relevant to the current customer select on the form. (The products are assigned to a customer in my products table). Currently I achieve this by using a query which when the form is opened asks me to enter a customer ID, the drop down list is then limited to the products supplied to that customer.
What I would like is for the drop down list to update as I navigate through the records. i.e. when customer A is displayed show all the products assigned to customer A, when customer B is displayed show all the products assigned to customer B.
I’ve attached a snapshot of the form to help explain what I mean.
Thanks for any suggestions.