Hours Minutes Format And Calculation
Oct 31, 2007
Hello everyone,
I am new to this forum, this is my first time. I hope someone can help me with my problem. I am creating a small database using Access at my work place. I came forward with 2 problems.
1. I need to create a field (Down Time) in a form that can store hours and minutes like 40:30. If I format the field as Short Date it wont allow me value higher than 23:59. Also, let you know that I am using the field (Down Time) in a calculation.i.e. Run Time - Down Time = Actual Time.
2.I also need a help on for the following calculation.
Unit per Minute =Quantity(number field)/Actual Time.
Your help is greatly appriciated.
View Replies
ADVERTISEMENT
Sep 1, 2013
I have a table of timecards each recording minutes spent on each task for each client and I have summed those minutes by client in a query.I have then in the same query converted each sum of minutes to hrs:mins format using this calculated field:
HrsMins: [SumOfMinTime]60 & Format([SumOfMinTime] Mod 60,":00")
So this turns e.g. 261 minutes into 4:21..Based on that query I have a report showing total hrs:mins spent on each client, e.g.
Smith 4:21
Jones 5:32
James 1:23
Now I want to show a total at the bottom, i.e. in the above example it would be 11:16.So for the control source for a total field on the report I tried:
=Sum([HrsMins])
But when I do that I get an error message: "Data type mismatch in critieria expression"I may be because I am trying to sum calculated fields amounts that are calculated using a function.Or it may be that the format is not being recognised as hours and minutes and thus cannot be added up.way in which I could get a total here in hours and minutes format (hrs:mins).
View 5 Replies
View Related
Jun 12, 2013
Basically I have a table setup where Time Fields are stored. What I need to do is in a Query, have the difference of two Time Fields calculated, and then displayed on a Report. Here's what I have so far...
Table
- Start Time
- End Time
Query
Difference Time: DateDiff("n",[Start Time],[End Time])
All that works fine and shows up on the report, except for the fact that the time is showed in straight minutes, so for a difference of 1:30 minutes, it just shows 90 minutes. I need to make it so that on the report in the Difference Time Text Box, it's showed as 1:30 instead of 90.
I tried putting the following in the Control Source for the Difference Time Text Box on the report, but it returns an error.
=[Difference Time] 60 & Format([Difference Time] Mod 60, ":00")
View 4 Replies
View Related
Jan 22, 2008
How can I convert hours and minutes to minutes as an Integer?
For example, convert 2:15 to 135.
Any help is greatly appreciated.
View 8 Replies
View Related
Feb 3, 2006
I would like to calculate the time difference between two dates, what ive got so far is
TimeSpent: DateDiff("n",[datein],[dateout])
This calculates the minutes between two dates, Can you format this so that it calculates hours. minutes for example 124 minutes would be 2.04?
I thought using "h/n" might work but it hasnt
thanks
View 1 Replies
View Related
Jan 29, 2007
Hi,
I am trying to show the time difference between 2 times but the calculation is not working correctly.
First I work out the totaltime on mins between 2 dates using datediff, then I am trying to convert to hours and minutes like :
Total_Time: Format([Sumoftotaltime_mins]/60,"00") & ":" & Format([SumofTotaltime_mins] Mod 60,"00")
This is working until I have something like :
03:00
15:45
25:20
this should work out as 44 hours and 5 mins but for some reason it is showing as 43 hours and 5 mins.
why would this be ?
View 4 Replies
View Related
Oct 9, 2007
I have a table wherein the time worked by 25 employees are recorded. This table has the start time, endtime, break time and late times. The Late Time is the number of minutes that the employee is late to work. I am required to do a query of the team's (all 25 staff) late times per month. I have done a query which shows the late times of the individual on the dates that they were late to work and created a crosstab query for that.
I am going around in circles. How can I have a total of the team's late times in a query? Please, could someone please point me in the right direction?
View 6 Replies
View Related
Nov 2, 2004
Hi,
I have a bit of a problem. I am making a program in access 2002. In my program you should punch in hours:minutes, this is for keeping track of how long a job has taken to perform. The problem is that it could exceed 23:59, it could take up to a week or even more. In my database we have already put in a lot of info where it doesn't exceed the 23:59, I would like to keep this posts and just to put in new ones that I could use further on when I am about to take out reports, where I have to calculate time. Is there someone who knows what to do ??
Regards
Greger
View 6 Replies
View Related
Feb 2, 2015
For Example: I have a field, let's say called Hours set to Data Type Number and Double format.
The user should only be able to enter time in 1/4 hr increments.
1 hr or 1.25 or 1.5 etc...
View 8 Replies
View Related
Jan 12, 2015
I have a query that uses DateDiff to give me Minutes of an in and out time.Online I found the following to use in a textbox control source on a report to convert the minutes to Hours:Minutes.
=[Minutes] 60 & Format([Minutes] Mod 60, ":00")
But when I enter this it gives me an error. I am not sure how to fix it. I tried writing it like this with RegHours being the source of that column
=[RegHours]60& Format([RegHours] mod 60, ":00")
but when I go back to report view that text box then says #Type!
View 1 Replies
View Related
Apr 1, 2013
I have a tracking database I have been working on and so close of being done just held up on this last part. What I am trying to do is have the totals = Ex. 1.25 + 3.50 would give Grand total of 5.15 not 4.75. The table has a field called time spent which stores the time. I have attached an example database. So whenever the minutes = more then 60 for it to add 1 to the hour.
View 13 Replies
View Related
Jul 22, 2007
I am using the calender control 11.0. By this calender I can only set the date year, month and day. I can not set the clock time:Hours, minutes and seconds. Is there a calender that enables me to set the date in the format:dd-mm-yyyy HH:MM:SS, means day,month,year Hour:Minutes:Seconds.
Grateful
View 1 Replies
View Related
Apr 23, 2015
I'm working on a utilization database and pulling Excel data from Cognos 8. I use Access formulas to separate hours and minutes because I want to use time (.30, .45 (minutes)) instead of quarterly increments (.25, .50). I've successfully segregated hours, because I also have to turn days into hours. When I try to calculate out a column just for minutes, my formula keeps the number of days and I don't know how to fix it so the column just shows the minutes.
An example is a job has a decimal time of 2.02083333, which when done correctly is 48 hours and 30 minutes. I get the 48 hours correct, but the minutes shows as 2.30 instead of 0.30. That inflates the total job time to 50.30. This is the calculation currently in my database to pull out minutes:
Minutes: Int(([Min]60)24) & "." & Format([Min] Mod 60,"00").
How do I get rid of the '2' in the 2.30?
Access 2010
View 2 Replies
View Related
Jan 22, 2006
Hi Guys
I need to create a method of calculating -week number,hours worked per week and a leiu hours total.
Explanation
Users enter their worked hours per day. I need to calculate the total hours worked per user per week and if this is greater or less than their contracted hours a record of this figure over a continual time period (or year).
Variables :- Time worked,Holiday hours,Leiu hours taken,Sick leave, Other authorised leave.
I realise that i'm asking on a lot but working for a charity has financial limits.
Attached the basic database-so far
Thanks in advance for your help
Row
View 4 Replies
View Related
Nov 19, 2011
I need to calculate in the tbleJobs table, the amount of the jobs total amount and place the result in the JobsTotalAmount field.
This has to be a manual calculation. Not an on event calculation.
Data is coming from two table:
tblLimos has the hourly rate.
tblJobs has the start time, the finish time and the total amount field.
View 6 Replies
View Related
May 23, 2013
I wana ask about calculation hours for schedule table. lets say how to calculate based on what i select from my schedule table for :
no class: how many hrs
lesson i got class: how many hours.. for example: 1+0.5= 1.5 hrs
total of hours: which is based on "no class" + " lesson i got class" for example: 1+1+0.5= 2.5 hrs
View 2 Replies
View Related
Jan 21, 2015
how can i get Access to display a value as hours:minutes:seconds in a query when is a 24 hours or greater value, for example i have the value 1.00826388888889 if i were using Excel i would format it as [h]:mm:ss and it would output 24:11:54.
View 2 Replies
View Related
Aug 1, 2013
I have a field in my report [Idle]
This has a time in a HH:MM:SS format (so 01:38:23)
What I need to be able to do is sum this greater than 24 hours and keep the format of HH:MM:SS - ideally I need to do this in the form field that I'll be using to sum it.
View 1 Replies
View Related
Jun 18, 2006
Hi, I am creating a time keeping db.
Before I jump in and start creating a way to record times worked I thought it best to ask for advice.
The db is created and the last part is to capture by member:
Basically I have the following fields:
MemberID
Job Type
Date of Job
Time Started
Time Finished
From the data captured I need to create a report to show month and ytd hours worked.
It would be easy to ask the user to calculate the hours worked and input the number of hours, however I would like to capture start and finish times.
Can anyone give me any pointers on the best field types and field formats for capturing times which would then make it easier to work out hours worked.
Thanks in advance
Darrell.....
View 1 Replies
View Related
Jul 13, 2007
Hi,
I need to calculate the number of days between two days however the format on which i have my date includes the time in the same field -
2007-02-20 07:15:30.474
When I calculate one date minus an other the result is #error
I require the result to be in a count format e.g 2.3 days (like in excel)
Is there anyway to get around this without splitting the date and time?
Please help!:)
View 3 Replies
View Related
Apr 24, 2005
I have a query that add up the numeric values in a value list assinged in a combo box in response to each question, the row source for question 15 for exmaple is as follows:
ROW SOURCE: 0;"I have no idea";5;"I indicated that I wouldn’t have time today";0;"Was mentioned early on and then not offered again";5;"The salesperson said the vehicle wasn’t available"
I then run a query that adds together the responses to 3 questions, including question 15, the field in the query appearing as follows:
LS5: ([q14]+[q15]+[q16])
It was working fine but has stopped working, the fault lies with q15, if I take it out it works again. So I looked at the table as I am sure it must be the way it is set up, why it worked before I don't know and I attach a screen shot of how the field is set up in the table, which is no different to q14 and q16.
Anyone got any ideas?
One last thing is that it makes no difference if the fileds contain a number (including zero) or are blank
View 7 Replies
View Related
Jan 29, 2014
Calculating the rates over a period of time. I think the attachment will give you a clear picture of what I am looking for.
To get the cost for a particular period I want the rates to be updated as per the given period. How I could get the calculation in the mdb format...
View 4 Replies
View Related
Nov 29, 2014
I want to subtract 8 hours of work of the Result of employee work hours/
There is attachment...
View 3 Replies
View Related
Mar 1, 2007
Hello all,
This forum has been a lifesaver in the past and I hope someone can help me now.
I have a Contacts form that is used to input all the client's information. (name, date of birth, address etc).
I want to be able to force the person entering the data to not be allowed to tab to the 2nd text box (or any other text box on the page) unless in the first text box data has been entered (the first text box is client name)
However, I also need to be able to overide this if the person entering the data clicks on a "Cancel" button (another button on the page which closes the form).
Is this possible and if it is any help would be greatly appreciated!
Thank you in advance,
Rob
View 14 Replies
View Related
Oct 12, 2004
I have time sheets from the past I need to enter but have found that some years the time punch minutes are given as if an hour equals 100 minutes not 60. Other years the minutes are given correctly. How do I format this field so that if I type 3.75 it will convert to 3.45 hours? Will I have to add another field to enter this and then convert to my field where hours and minutes are correctly entered? :confused:
View 2 Replies
View Related
Apr 20, 2006
I have a query that shows a list from GPS software (car fleet management), unfortunately the software is not capable of doing a decent reports thus I'm trying to use its data and do it myself.
The table structure is as follow:
Car, Date, Time, Position.
The time interval I have now is 1 minute (short time format), I don't need it so detailed, that's why I was thinking to limit this into 5 minutes interval.
Is it possible?
Thanks for any suggestions.
View 1 Replies
View Related
