How I Can Calculate Correct Total Hours In MS Access 2003

Jul 26, 2006

I have a problem with Microsoft access 2003. I want to design a Check in/Check out Time Data base for my university final term project. In this data base I need to show the total of the working hours of each personnel in a month.( for instance: 124 hours and 55 minutes in one month). But adding up the hours, when the time variable reaches 24 then time automatically goes back to 01:00. As a result, the correct total hours cannot be calculated....

View Replies


ADVERTISEMENT

Calculate Total Hours (for All Employees) On Each Department?

Sep 28, 2005

Hello, i have a table with the fields: "employee_number", "shiftdate" "department" "basic_hours", and "over_time"

And a query named "employee_hrs" looks at the fields in this table, i would like a new field in the query to be able to calculate the total hours for all employees together but for each department.

eg the total of: basic hours + overtime for department A)
the total of: basic hours + overtime for department B)
and so on for each department

would only like to show one instance of a department (distinct) with the total hours done by all employees for that department?, if any one could please help me out that would be great!?

View 3 Replies View Related

Queries :: Column Total In Access 2003 Query

Apr 19, 2015

how to have our Access 2003 query total our report column "ProfitLoss`and produce on our report a Total Value of -$420.17

View 13 Replies View Related

Queries :: Self-Referencing Running Total Used To Calculate Next Total In A Query

Jul 23, 2015

I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records

I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do

If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..

View 9 Replies View Related

How To Calculate Business Hours!

Oct 27, 2006

I need to calculate the difference between to datetime fields. However, i need to exclude weekends, holidays and non-business hours. I also need to return the result in hours, minutes, seconds.

can this be done. if so, does anyone know how to do this, or is there code that i can implement and save for future uses.

thx,

john

View 1 Replies View Related

Total Working Hours

Mar 10, 2008

Hi ther,

I wonder if someone could help me with what I am sure is simply code, I just can't seem to get the response I want. :confused:

I am working out each member of staffs working hours for the day.

[Start Time]
[Finish Time]
minus a 30 min lunch.

I would like to display the total hours worked for the day in an hour:minute format.

I've tried a few diferent things and still not got the answer I was after.

Your help with this is greatly appreciated.

View 7 Replies View Related

Total Hours By Week!?!

Mar 11, 2008

Hi All,

me again, now that I've got over the working hours hurdle I'd like to sum by week.

I'm quite new to access so please excuse my simple questions.

My fields are:

LogID {EmployeeID&Now()}
EmployeeName
StartTime {date&time}
FinishTime {date&time}

I have created a query to give me the total hours worked per day. Is there anyway I can total this by week?:confused:

Once again your help is greatly appreciated

View 9 Replies View Related

Total Time On Hours And Minutes

Jan 29, 2007

Hi,
I am trying to show the time difference between 2 times but the calculation is not working correctly.

First I work out the totaltime on mins between 2 dates using datediff, then I am trying to convert to hours and minutes like :
Total_Time: Format([Sumoftotaltime_mins]/60,"00") & ":" & Format([SumofTotaltime_mins] Mod 60,"00")

This is working until I have something like :

03:00
15:45
25:20

this should work out as 44 hours and 5 mins but for some reason it is showing as 43 hours and 5 mins.

why would this be ?

View 4 Replies View Related

Total Amount Of Hours Left / Used

Feb 27, 2007

Hello All,

I need to create a derived attributes (total hours left, total hours used).

In order for the calculation I have days_allocated in the employee table (this is converted into hours by multiplying this by 24).

How can I create a field in a query that works out the amount of hours used and left?

Here is a typical holiday record (screenshot of my query that I am trying to do)

http://img3.freeimagehosting.net/uploads/th.8af9f3cd25.jpg (http://img3.freeimagehosting.net/image.php?8af9f3cd25.jpg)
Can someone please help me create a formula.

Thanks

View 13 Replies View Related

Total Hours (or Minutes) In A Query

Oct 9, 2007

I have a table wherein the time worked by 25 employees are recorded. This table has the start time, endtime, break time and late times. The Late Time is the number of minutes that the employee is late to work. I am required to do a query of the team's (all 25 staff) late times per month. I have done a query which shows the late times of the individual on the dates that they were late to work and created a crosstab query for that.

I am going around in circles. How can I have a total of the team's late times in a query? Please, could someone please point me in the right direction?

View 6 Replies View Related

Queries :: Show Sum Of Total Hours

Nov 4, 2014

I am trying to build a query to show the total sum of hours a staff member has done in a certain department and the amount of sleep ins they have done. Each staff member has a unique ID. In the query I can get all the information but it shows on two lines dependent on department. I want this to show on a single line. Each employee will never have more than two departments. The query is called "QryForForum".

View 2 Replies View Related

DSum Not Coming Up With Correct Total

Sep 6, 2012

I have an Inventory DB Table called [EngData] that has a subform table called [Inventory]. I have in the subform a calculated text box that Sums three columns, StockQtyMade, StockQtySold and StockQtyShrink. This works perfectly.

On the Main form I have a calculated text box that references the subform calculated field. This also displays correct info.

On another Form I wanted other users to see the total stock on hand by using a calculated field called PullTotalQty. This is set by using DSum(...). The only problem is that the DSum(...) keeps giving totals that are not accurate. Sometimes the quantity is a few pieces less then the correct amount and in other cases the qty is many times what it should be.

Whatever the amount in error it is consistent each time a particular record is displayed. I have tried many things to get this to work but nothing has fixed the issue. I have also tried changing the query and nothing works. Changing the query and using the [Inventory] table in the DSum domain gives a different wrong quantity.

Here is the code: I reduced the code down to one column to be summed (StockQtyMade) just to see if I could get that working first. I will add the other two columns later. for testing purposes I am only looking at the StockQtyMade amounts.

Me.PullTotalQty.Value = DSum("[tblInventory subform].[Form].[StockQtyMade]", "[SumStockQuery]", "[tblInventory subform].[Form].[PartID]= " & Me.[ID])

Here is the SumStockQuery SQL:

SELECT Inventory.TransactionID, Inventory.PartID, Inventory.PrintNo, Inventory.StockRev, Inventory.StockQtySold, Inventory.StockQtyMade, Inventory.StockQtyShrink, Inventory.StockQtyXIncomplete, Inventory.StockLoc, Inventory.TransactionDescription
FROM Inventory
WHERE (((Inventory.TransactionDescription)<>"xNextOP"))
ORDER BY Inventory.TransactionID DESC;

Why the totals are incorrect??

View 3 Replies View Related

Calculate Work Hours Excluding Weekends.

Feb 16, 2006

Let me just start out by saying that when it comes to Access, I ride on the "little bus", so I apologize in adavance if this is a lame question.

I have a table with two date/time fields. One for reporting the date and time of an issue start, the other for the date and time of an issue ending. I'm trying to find a way to get the number of hours between the two without including weekends. I found a module on mvps.org that excludes workdays. However it doesn't seem to work in this case. For instance, if I put in an issue start as 02/10/2006 7:30 am, and the issue end as 02/13/2006 6:45 am, it only counts it as one workday. It won't count the 13th as a workday until the time is >= 7:30 am.:confused:

I'm simply stumped. Any help would be greatly appreciated.

Thank you,:)

View 4 Replies View Related

Queries :: Calculate Time Period For 24 Hours?

Jul 9, 2014

I have designed an access application that logs emails that come into a department. However, the team leader has asked me to create a report to work out if emails were answered within a 24 hour period.

Is there a method to do this. It is not something I have attempted to do within access before.

View 6 Replies View Related

General :: How To Get Total Spent Hours In Office For The Employee

Jan 28, 2014

I am facing one problem while calculating the number of hours an employee spent in the office. Each employee will have a swipe card and the swipe data is stored in an .mdb file. Some employees will have different shifts and may come after 6pm and will go next day 5 am , while calculating their spent hours getting the problem. The swipe data is stored in IOData table , I wrote a simple query below to get the data., it is calculating correctly for the employees who come in between 11AM to 8PM but who are coming after 6PM and going next day , facing problem. Time is storing in 24 hour format in table with Status as Entry,Exit . There may be any no.of exits and entries , so i took min and max of the time in the below query.

I am attaching the mdb file data in an excel sheet(Master_Data.xls) and also the data of the below query(Swipe_Data.xls) and highlighting the employee for which we got problem.

SELECT HD.JobTitle, HD.HolderName, IO.IODate,IO.IOStatus, min(IO.IOTime), max(IO.IOTime), DateDiff("n", min(IO.IOTime), max(IO.IOTime)) AS Minutes, [Minutes] 60 & Format([Minutes] Mod 60, ":00")
FROM HolderData AS HD, IOData AS IO
WHERE HD.HolderNo = IO.HolderNo and
HD.DepartmentNo IN ('0008', '0009') and
IO.IODate between #01/20/2014# and #01/24/2014#
GROUP BY HD.JobTitle, HD.HolderName, IO.IODate,IO.IOStatus;

View 3 Replies View Related

Queries :: Adding Up Times To Get Total Amount Of Hours

Dec 5, 2014

I have a table of hours that have been worked by employees for each day of the week

[moh] (Monday's hours),[tuh],[weh],[thh],[frh],[sah],[suh]
data eg (this is how I would like it to be inputted into the table)
7:24:00,7:24:00,7:24:00,7:24:00,7:22:00,0:00:00,0: 00:00

This equates to 36:58:00

I have tried

Total Hours: [moh]+[tuh]+[weh]+[thh]+[frh]+[sah]+[suh]

but I am struggling to get what I want in the right format.

How to record the initial data or a formula to format the end result.

Excel just does it !!!!!

View 1 Replies View Related

General :: How To Calculate Percentage Of Correct Responses PER RECORD

Sep 12, 2013

What I'm looking to do is calculate the success rate (%) of compliance rates with Quality Control paperwork. Essentially, each record has 12 "check box" fields representing the different QC sheets that are submitted each day.

QCflavourChange
QCfillerOperator
QCblowMoulding
QCtorqueTest
QCnetContents
QClabeller
QCpacker
QCpalletiser
RMpreform
RMclosure
RMlabel
RMcarton

I have been able to find the code for counting the success rate of a specific type of QC sheet across multiple days worth of testing, eg:

=Sum(IIf([RMpreform]=True,1,0))])

But I have been unable to determine how I can count the total of all the successful fields listed above, across a single record.

View 7 Replies View Related

Using DSUM With Textboxes - Display Total Of Hours Based On Date

Jan 19, 2015

I am having difficulty getting a second textbox to display the correct total of hours based on a date entered into a first textbox.

Setup:

Table Name: TestTable1
Fields: 'RequestDate' & 'Hours'
Form: 'Form1'
2 Textboxes Unbound: Named 'Date' & 'Total'

What I am trying to accomplish:

Based upon a date entered into the "Date" textbox I want the "Total" textbox to display the total hours associated with that date.

What I have tried:

I have tried using, in the control source property of the "Total" textbox, many iterations of both Sum(IIF & DSum(

I am currently using the following:

=DSum("[Hours]","TestTable1","[RequestDate]='Forms! Form1!'Me.Date'")

I have tried this without the Forms designation; without the "Me" designation; Etc.

Some attempts return the Error or Name error while other efforts return a blank textbox...

View 4 Replies View Related

Queries :: Time Sheet / Payroll Database - Calculating Total Daily Hours

Feb 18, 2014

Access Query. I am creating a time sheet / pay roll database and I want to be able to get a total of the daily hours in a query.

For example I have 'Mon Start' and 'Mon Finish' for Mondays in/out times and I have a 'Mon Total' which gives me the total hours worked for Monday.

The problem I have is that Mon Total only works if the hours are say between 07:00 and 17:00, anything after midnight (00:00) like 21:00 to 07:00 and 'Mon Total' goes crazy !!

At the moment 'Mon Total' is the result of CDate 'Mon Finish' - 'Mon Start' (bit rough I know).

View 3 Replies View Related

How To Calculate Total?

Nov 19, 2006

Hi, i'm trying to calculate the amount of employee for each company giving me a total in the queries.. how do i go about this? I'm not an person who uses Access to solve this. I have amount 20 Companies stored and over 800's employee.. Here are the field in the table:EmployeeIDEmployeeNameNumberofEmployeeThanks! Hope this helps.

View 1 Replies View Related

Calculate Total Thru Date Value

Jun 30, 2005

Hi All.
I try to generate a report which calculate subtotal for patient AMOUNT for current year and total for whole period from first visit to current date. The result of subtotal =Sum(IIf(Year(Date()=[VisitYr]),[Amount])) is the same like total. What is a correct way?
Thanks.

View 4 Replies View Related

How To Calculate A Total Of 0 When There Is No Data

Jan 8, 2014

Say I have a table with ID's of people and a column with the hours they need to work on a specific day. I want to make a query where I get the total working hours for every person in that table for a certain date. The problem is that when a specific person in the table has no hours for a certain day he doesn't show up in the query if I choose that day.., is there a way to make sure that I get everybody's names for every day even if they don't have any hours on that day, but instead of not showing it would show a "0" instead?

View 1 Replies View Related

Queries :: Calculate Value From Previous Day To Sum To Next Day Total Income?

Dec 2, 2014

I have this columns :

Income | Outcome | Transport | Total Income | Date
Total Income (N) = Income (N) + Transport (N-1)
Total income equals income from that day + transport from previous day

Transport (N) = Total Income (N) - Outcome (N)
Transport from previous day equals Total Income minus outcome

How can I calculate the transport from previous day to sum to next day total income?

View 1 Replies View Related

Modules & VBA :: Calculate Percentage Of Total Proposal Amount

Dec 18, 2014

I have two numbers, i need to calculate how much percentage of one is the other. E.g

num_1 = 100
num_2 = 10
percent = 10%

Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.

Actual Code

Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)

[Code] .....

billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.

View 4 Replies View Related

Modules & VBA :: Calculate Total And Convert Numbers To Words

Apr 7, 2014

I have a form that have textbox that calculate total and then i want to convert numbers to words. Iv got the code with function currencytotext but when i set the code source of another textbox to:

=currencytotext([inv_total])

I have an error. I saw this on internet but i think bcz I am using access 2013 may be the syntax is different a bit.

View 5 Replies View Related

Queries :: Running Total To Calculate Uptime Monthly

Jul 1, 2013

I am having trouble with this running total. Let's say I have a well. I am trying to create a running total that calculates the total Uptime (or hours operational) for each well every month.

I attached a PDF with an example of what I am working with.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved