I have a Date Field and I would like to complete another field depending upon the contents of that date field.
In this way: if the Date is, say, 4/27/12 I want the other field to read: April 2012 and so on. Reading the month, putting it into words, reading the year, writing it out. This second field is NOT a date field.
I am trying to do some simple table operations. I have a field (Date) containing dates, and an empty field called Day.
I want to extract the day number from the Date field, and write it to the Day field.
I didn't get very far until I ran into trouble when setting my recordset. I get the error "Too few parameters, expected 1". Clicking "Debug", will highlight the code line "Set rs = db.OpenRecordset(sqlString, dbOpenDynaset)".
So far, my code looks as follows:
Code:
Private Sub Command16_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim sqlString As String
Dim dataDay As Byte
'Open connection to current Access database
Set db = CurrentDb()
[Code]...
I am not very familiar with the various types of recordset settings. I just want to be able to read data from the Date field, and write data to the Day field.
I am having trouble parsing the month from a date like 05/12/2007 and I want to return the leading zero with the month. Example of 05/12/2007 and I want to display 05 only.
Please send any suggestions.
Thank You,
MJ
Hi All,
Can someone get me started in the right direction?
I have an unbound field on a form "txtScan". This field is populated by a barcode scanner.
The data looks like this ~Field1~Field2~Field3~Field4~Field5~Field6~Field7~ Field8~Field9
I am using ~ as a delimiter. Since I am encrypting the barcode, I can pretty much do anything to the barcode.
I need to parse
~Field1~ into txtFirstName
~Field2~ into txtLastName
~Field3~ into txtCompany etc.
A key point is that one of the fields may be blank so, if field 2 in the string is blank, "Field2" does not get populated.
I've never tackled anything like this before and don't know where to start.
Any help
TIA
In a query, I have the following data. If a number has more than six digits, I need to parse past the fifth digit and that becomes a new field. If it has five or fewer digits, no record is entered into Column2. For example:
Column1 Column2
12345
54321
123456 6
12345678 678
123
9876541 41
6
What simple code does it take to perform this in a query?
Access 2003
I have a process which imports a txt file into a memo field of my TBLORIGINAL table Each file may have one record or it may have multiple records Every record begins (exactly) with
Quote:
FRE Order Order RAD ShipDate Customer City State Postal Code
For each record in the memo field, I need to create a new record into my TBLPROCESSED table
This can probably be done while it is importing but I need to keep the original file intact
I suppose I could copy and paste but there must a vba way of doing this
Is it possible to have IIf function which checks if there is a text1 in another field and if true writes text following text1 in to field containing IIf function.
Example(field1 containing text1)
Na avtocesti Maribor - Ljubljana pred priključkom Blagovica v smeri Ljubljane je zaradi prometne nesreče zaprt vozni pas.
I want to check if it contains red text and if true, write blue text.
field1.................................field2
***v smeri A***.................A.........
****proti smeri B****.........0........
Hey Guys,
I'm looking to create a "Same As Billing Address" check box that would automatically udpate the address in an order to reflect the customer's billing address.
I understand how to sync a combo box to an option group ( -- great article by the way)
I Guess what I'm looking to do is:
1. Sync a "Same As" Checkbox to multiple text boxes in the form (Unit, StreetAddress, City, Province, Postal) such that these fields are UPDATED (writen to) with the same information as the billing address
2. [U]IF the "Same As" Option is selected, I need the updated fields to lock, allowing no further update... but must by unlocked if the "Same As" option is NOT selected.
Please help me out with this one guys.. I really need it.
I am trying to update a memofield from a form.My file.. sign_midi.asp has this partial code.First I pick up the record I want to update.
And then present it in a form.
"
<tr>
<td align="right" height=10 valign="top"><b>Beskrivning :</b></td>
<td align="left" height=10 valign="top" width=250><TEXTAREA WRAP="soft" name="M1" cols="65" rows="8"><% = rs("text")%>
I have a form which has an unbound text field which is a calculated filed showing a date which is x months after a separate field on the form.
I need to write this field back to a table in the database when an "add" command button is clicked.
The table is called Assets
The form is called Assets List
The text field on the form is called txtWED and needs to be written back to the table "Assets" in the field "Warranty_End_Date"
If possible can I add this as an expression on an "add" command button?
What should I do so I can use memo field in database as a memo field so I can write text in more than one row.
For example what is happening now when my user pres enter he does not go to a new row in memofield but he goes to new record.
In fact how can I get something similar to this wysiwyg type?
I have a table name ex. equipment and many fields inside ex. date, equipment name (combo box) and others.
I need to make form for all fields and button search once I click on it will open a report depending on a fields i selected.
I think that I have to use VBA
I need that in a form when I write in a determinate field check if exists and if exists fill all the fields in the form
How could I do it?
I have a query with many fields. One of them is the combination of two fields and is called "Components Reference". What I try to do is, every time this query is updated, the records of only this field "Components Reference" to be written to the field of another table which also takes records from an another query. I wish I was clear enough.
View 13 Replies View RelatedI need to display the year, Date, agent name, amount field, note and sub total for each year.I need to write the SQL query code in VBA and i designed the report with proper field positions.
YEAR column: Display Value only once for the FIRST ROW for Maximum value of Date field value for each set of YEAR. If it has only one record, it display that year.SUB TOTAL Column: Display Total Value for Amount field only once for the LAST ROW of each set of year record (Mininum value of year). How to make it available the values for first and last record alone ?
I just wrote my SQL code based on your inputs in my editor..Based on the input from Plog (from this forum), i wrote a code which listed below.
Code:
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = "SELECT CessioneCredito.Anno, CessioneCredito.Data_Movimento, CessioneCredito.Note_Liq_Cessione_Credito, CessioneCredito.Importo, " & _
" Agenzie.Denominazione, DCount("[Anno]","CessioneCredito","[Anno]=" & [Anno]) AS GroupSize,
[Code] ....
While saving it, it shows the code in RED COLOR due to compilation error.As I am writing the query in Me.Recordsource = "SQL query", where i should place the below listed code in the query as per Plog???
Change the Year Control Source to this:
=IIf([GroupPos]=1,[Year])
Change the GroupTotal Control Source to this:
=IIf([GroupPos]=[GroupSize],[GroupTotal])
If this is not possible in Me.recordsource, then its advisable to use recordset like writing in two different queries.
Code:
Dim ds1 As Recordset
Dim ds2 As Recordset
myquery1 = "SELECT CessioneCredito.ID_Agente, CessioneCredito.Data_Movimento, CessioneCredito.Importo, CessioneCredito.Anno, CessioneCredito.Note_Liq_Cessione_Credito, Agenzie.Denominazione
FROM CessioneCredito INNER JOIN Agenzie ON CessioneCredito.ID_Agente=Agenzie.ID_agenzia
WHERE (((CessioneCredito.ID_Agente)=[Reports]![R_StoricoCessCredAg]![ID_Agente]))"
[code]....
what is the correct syntax to write a command line able to UPDATE more than one field in the table records having multiple WHERE criteria.
Here is my challenge:My TableI has the columns A, B, C and D which are populated, for example, as follows:
TableI
A B C D
1 2
2 6 4 3
1 7 5 9
1 2
2 5 8 5
etc.
I also have a FormII which updates TableII. Among the existing fields of TableII there are the fields C and D (same as above). When saving data entry thru the save button of the FormII, fields C and D will be naturally saved on the TableII. Well, I also want C and D info updated into Table I as well, but only when field A=1 and B=2.So what I need (for the click event of the button save in the FormII) is to open TableI and either insert or update it with the values of the fields C and D in every record WHERE A=1 AND B=2.For instance, assuming C=& and D=%, the desired result should be as follows:
TableI
A B C D
1 2 & %
2 6 4 3
1 7 5 9
1 2 & %
2 5 8 5
I did not find any examples in the net including multiple criteria..Here is what I wrote unsuccesfully:
Private Sub BtSalvarFrmII_Click()
CurrentDb.execute "UPDATE TableI"
Set FieldC = Forms!FrmII!FieldC.value AND Set FieldD = Forms!FrmII!FieldD.value WHERE FieldA = 1 AND FieldB = 2
Docmd.save
Docmd.close
End Sub
What would be the correct syntax?
Hi,
I need to create a query that will parse a word and separate it into a list of letters.
I have had a go myself but am unable to do it... does anyone else know what to do?
Thanks.
Probably very simple but I cannot get the syntax right - it has been far too long since I used Access.
I am trying to seperate a field NAME from these formats:
LAST/FIRST M
LAST/FIRST
To two fields: Field LAST and field FIRST
Can someone please help?
Thank you! It is Friday and I want to go home!
I am tring to seperate a field using a query that has data like this:
02 04 08 18 20 25 31 32 35 39 41 45.... (10 sets of numbers)
into there own fields...
I cant seem to find something along those lines!
I am looking to parse names that go into a table in the field "FULLNAME", but I only want this qry to run if there is 1 space in the field.
UPDATE tblStandardLayout SET tblStandardLayout.FNAME = Left([FULLNAME],InStr([FULLNAME]," ")), tblStandardLayout.LNAME = Mid([FULLNAME],InStr([FULLNAME]," ")+1);
This would be because I dont want it to try to parse names that are not just "First Last"
I am a novice here so your patience and help is very much appreciated.
I am trying to parse text from a field.
Here's an example of the source data (all in "field1"):
Example 1
***** Regular *****
Time..08:19 DATE..03/27/2008
Request NO...20081306101
...and this is how I would like it"
New Field 1: Regular
New Field 2: 08:19
New Field 3: 03/27/2008
New Field 4: 20081306101
Because the values change substantially, I would like to be able to select the data in between two known text strings as opposed to using the MID function, an example of which I have successfully used to return "Regular" is:
MID([field1],InStr9[field1],"*****")+6,7)
But because the values change (e.g. "Emergency") I would rather have the end point based on the string "*****" rather than a count of characters (e.g."7")
Any suggestions?
I have a User Defined Type which stores an array..I have 2 instances of this UDT, one storing matched data, the other storing exception data..I was to parse these arrays to an Excel output routine. However, the parameter variable contains no data when accessing it..
Here is my code:
Code:
Private Type TOutputRow
RACFID As String
FullName As String
Access As String
LastLoggedIn As Date
End Type
[code]...
I am attempting to create a report and pass on the information from the current form to it. It is supposed to create a student ID and I am unable to get the information into the appropriate fields.I can get all the info from OpenArgs into one box but it wont parse it all out. The Form is within a navigation form. I know the below option is not the best way to do it, but other options I have found it has issues with sending when the form is within a navigation form and I prefer not to redo the entire thing at this point to remove the Navigation form.
Code:
DoCmd.OpenReport "rptStudentID", acViewPreview, , , , OpenArgs = "lblSSID|" & Me.SSID & "lblFirst|" & Me.firstName & "lblLast|" & Me.lastName & "lblDate|" & Me.dateAdded & "lblImg|" & studentList.Column(4)
The Parsing which is mostly just a copy from the above site
[code]....
Here is what I need to do:
I have 1 table that contains groups responsibilities, there is a field Code-group that the initiator uses to track the groups & their % of impact to the overall project hours. Sadly enough he enters the data as such (EX:
PROJECT1 GROUP1-25%, GROUP2-50%, GROUP3-25%.
The problem is that he has varied instances of groups listed in each record & wants me to be able to parse the data out regardless of how many groups are listed. I know how to parse data when there are a specific number of groups what I can't figure out is how to parse data regardless of how many groups is in the field.
Any help is totally appreciated.
Phoenix
If I have an XML file, I can load it into an XML document and parse it.
For an HTML file, I have been unable to find similar parsing methods - that is, using DOM and not involving a browser (other than simply treating the file as text). I'd prefer to avoid the browser control because it is different for a number of different Access versions, so the only option remaining that I see is to run Internet Explorer with visibility off.
Can one parse HTML using the DOM without a browser?
Solution to parse the strings below and get number of months
1) 10 years 5 months 5 days - Should give 5
2) 6 years 10 months 22 days - Should give 10