How To Refresh A Form

Feb 20, 2006

What is the best way to refresh a form that has check boxes, list boxes, and text fields ? The table used as source was cleared, but the form was not.

View Replies


ADVERTISEMENT

Update / Refresh A Form Upon Entering Data In A Popup Box / Form

May 24, 2005

I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.

**************************************************
Scenerio:

I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.

Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.

Million Dollar Question:

How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.

**************************************************

Again, I know this is probably simple, but I cannot find it anywhere or most likely I am blind :cool:

Thank You

View 1 Replies View Related

Refresh Form

Mar 9, 2005

I have approximately 20 people using a shared database form. When someone updates a form creating a new record I want everyone to be able to see that new form record without having to close the form down and reopening it. Each form is given a form number by autonumber.

Thanks in advance!

View 3 Replies View Related

Refresh Form?

Jun 8, 2006

I wrote some procedures which handles each a seperate unit.
When a procedure finishes, I want to write an entry to listbox 'lbLogbook' so the users sees what's happening. But the entries in the listbox only appears when all the procedures are finished. When I go into break-mode and go step-by-step then I see the listbox filling up. Do I have to manually refresh the form or so?

Regards,

Johny

View 2 Replies View Related

Form Refresh

Jan 19, 2005

Hi,

I am having a crazy situation.

I have a form (f1)which has 2 sub forms. this form is getting called from another form(f2). When f1 gets loaded , its subforms will have a set of data, and when i want another set of data to be visible or refreshed it is not happening on the subforms.

we have tried.

form.refresh
form.requery

and also f1!subform.form.refresh & f1!subform.form.requery.

What is it that is not allowing to refresh the data on the subforms.

Please Advis.e

hari

View 4 Replies View Related

Refresh Main Form After Inserting New Record In Another Form

Jan 24, 2012

I have a main form where information for a particular part number or job is entered. Should the part number not yet exist, Access will let you know. I have a button within the main form that opens up the Form_EnterPartNumber form which allows you to enter the new part number.

What I would hope to be able to do would be to refresh (requery?) the main form after creating a new part number and closing the Form_EnterPartNumber form..........but, keep the main form on the current record instead of resetting back to record number 1.

Is this possible?

View 1 Replies View Related

Refresh Form From Report

Jan 27, 2005

I have a report that, when closed, I would like to refresh the main form, or subforms in it (Whichever is easier)


Main form: frmMain
Sub form A: subWebLCSel
Sub form B: subWebPartSel
Report: rptLabels


I tried:

forms!frmMain!subWebLCSel.form.requery- told me it cant find the field subWebLCSel

Forms!subWebLCSel.Requery - tells me it cant find the form subWebLCSel


Any ideas?

View 7 Replies View Related

Refresh Main Form

May 11, 2005

Hi

I have a sub form and a button on the main form that needs to be pressed to refresh the data in the main form after data has been entered into the sub form.

Is it possible to have the main form refresh on exit from the sub form field automatically without having to press the button??

Could i hide the button and run a bit of code that runs the refresh button on the main form on exit from the subform field?

thanks in advance

View 12 Replies View Related

Form Refresh Problem

Sep 15, 2005

I have a form with linked fields. If I keep this form open and I input the data in the linked table using another method, but not the form, the form is not refreshed. I would like to add a button to the form that refresh the form with the new data, but I dont` know any functions or VBA code that can do that. How can I solve this problem? There exisist any refresh form function/method in VBA?

Thank you in advance!

View 1 Replies View Related

Form Page Refresh

Oct 13, 2005

Hi,
I have one main form, inside it there are 5 pages, is there any code I can use so that when I go between pages the data is refreshed.
e.g. I have a "fault" page where I log a call, then an "open calls" page where the calls go, however I have to close the form and reopen it for the data to appear!

View 2 Replies View Related

Sub Form Navigation After Refresh

Oct 22, 2005

After a refresh of the sub form, I want to go back to the last record edited. This might be a record not fitting on the top of the screen, let's say record no. 2000.
After the refresh the sub form shows the first records, and you need to scroll down.
How to solve this?

View 8 Replies View Related

Refresh A Different Form On Close

May 8, 2006

HI basically i have a form which dislays records in a continous list, then an add button which adds records to the list. to view the newly added records you have to close the form and open it again.

I have inserted a refresh button but what im after instead is when i close the 'add form' it refreshes the list form. Below is the code for the refresh button could someone tell me what i need to add/change to make it refresh a particular form on close?

Private Sub Command45_Click()
On Error GoTo Err_Command45_Click


DoCmd.DoMenuItem acFormBar, acRecordsMenu, 5, , acMenuVer70

Exit_Command45_Click:
Exit Sub

Err_Command45_Click:
MsgBox Err.Description
Resume Exit_Command45_Click

End Sub

Thanks for any help

View 8 Replies View Related

Refresh Form Fields

Jun 7, 2006

Hi

I have a query that picks up 2 dates from 2 fields in a form. If I change the values of the fields the Query picks up the old values. I have tried Requery and saving the Form programatically prior to running the Query, but the only way I can get the Query to use the latest field values is by closing the DB completely and then opening again.

ViRi

View 1 Replies View Related

Refresh A List Box From Another Form.

Nov 1, 2004

Currently I have a Tabular view List (of text boxes) populated from a query.

What I am looking for is a way to refresh the list. I presumed me.refresh, me.requery or me.repaint would work, but it doesn't.

If I open, then close the list it refreshes. So presumably I could close then open form for an update, but that is crude and there must be a way to do it properly?

The user navigates between two windows (client list *name and age*) and (Client info *in depth info and history*) they click on a record in the list and are taken to (client info) whereupon they can edit or add a new record. The records that are updated do so without a hitch, however the new records do not update in the list.

Paul

View 1 Replies View Related

Refresh Form Data

Aug 22, 2007

I just realized why I wanted to stop using Access long ago...anyway here's my problem.

I have two tables: table1 and table2 (I know,creative). Anyway, table1 is linked from another database, table2 is local to the open database. I use table2 as a temporary table to hold data from table1. table1 is then set as the datasource of one of my forms.

I have a button which is used to refresh the data. Basically, it deletes everything in the temp table (table2) and inserts data from the linked table (table1). When I do this, the rows in my form then all contain #Deleted, but it never refreshes with the new data after I have inserted it.

I've tried using the Refresh, Requery and even Repaint methods. Still no luck. Then, I clicked Remove Filter from the toolbar and the new data appeared, but I don't have any filters in place. So then I tried to do this programmatically by setting the subform (I'm using subforms ) Filter = "", its FilterOn to False and its OrderBy = "".

Any suggestions?

Cheers

View 3 Replies View Related

Refresh Form When Click Out Of A Specific Box?

Jun 29, 2006

I have a refresh button next to a box in my form. I would like to make it so that when someone clicks another field or out of the key box it will refresh the form automatically because that box makes other fields autopopulate and the way I have it set up thus far is that you half to refresh the form somehow to get that date to come over.

How do you like that run on!?!?! :p

Thanks for any help!

View 3 Replies View Related

Refresh Pivot Table In Form

Sep 21, 2006

I'm trying to use a PivotTable Form (in Access), in order to automate a process (previously data was exported to Excel and the pivot table was created manually). I've got my pivot table form working fine but I need to provide the user with a way to refresh the Pivot table - i.e. re-run the underlying query.

In Access Help it says to select design view and then click the Refresh button (the one with the big red '!' icon). This does work and the data is updated but it's not a user friendly option.

Opening the form doesn't automatically refresh the pivot either, so does anyone know a way I can provide a button with VBA code or whatever to manually update the pivot so it reflects changes in the underlying data?

View 1 Replies View Related

General :: Refresh A Form After Importing

Jun 15, 2014

I have a form that's using a query as a record source. Normally that query is empty, as it's just linked to a temporary table, so when I open the form, generally I'm on record 1 of 1.

On that form is a button that imports data from a text file. I want to find a way to refresh the data on the form after importing, so that it shows the new records without having to close and reopen the form. So where I was on record 1 of 1 before importing, I want it to show that I'm on record 1 of 25.

View 3 Replies View Related

Modules & VBA :: Refresh Subform From A Different Form

Apr 15, 2014

I have an close button on a form that is supposed to Refresh the subform of a different form and then close the form with the close button.

frmOperations - no refresh / requery
subfrmPlants - Needs to be refreshed / requeried

frmPlants - Needs to be closed

Currently the button effectively closes frmPlants, but it's failing to refresh the data on my subform to display any changes that have been made on frmPlants. I've tried with refresh and requery, neither seem to work.

Code:

Private Sub lblClose_Click()
If CurrentProject.AllForms("frmOperations").IsLoaded Then
Forms!frmOperations!subfrmPlants.Form.Refresh
End If

DoCmd.Close acForm, "frmPlants", acSavePrompt
End Sub

View 2 Replies View Related

Forms :: Refresh On Form Close Using VBA

Sep 17, 2014

I have combo box that lists data from another form (frmCity) . If the required data in not in the list then frmCity is opened, a new record is entered and form closed. The combo box in the first form (which has remained open) does not show the new entry unless it is closed and re-opened. How can I get the new record to show without closing and reopening?

View 3 Replies View Related

Forms :: Refresh Form That Is Already Opened

Mar 17, 2013

I have forms that show commitments by Client, by Cost Centre, by Provider etc.

If I add new commitments or edit commitments it is done through the Commitments by Client form, as all other forms lead back to this one.

To create a new or edit an existing commitment, it is done through a Commitment Form, which goes into a query (query A)which does all the calculations. My client form has subforms based on Query A, however my other forms (commitments by Cost Centre etc) have subforms which have querys that are based on Query A . I hope that made sense.

My problem is that If I edit a commitment, the client form and subforms refrlect the changes imediately, even though they are open and I can see them changing when I change the commitments. However the other ones don't unless I close them and re-open them.

My navigation within the database is based on once a form has been opened it is set to be invisible untill called on again (i.e. visible = False).

How to requery all the forms without having to close them.

View 1 Replies View Related

Refresh Subform From Separate Form

Nov 23, 2012

I have a form called frm_Incident_Single. On this form I have a subform/subreport called tbl_Incident_Apps_subform. I have a command button on frm_Incident_Single that opens another form called frm_Incident_Apps where I choose multiple selections. When I save or close the form I would like to update the subform - tbl_Incident_Apps_subform.

I've tried to requery/refresh the subform in the save procedures in frm_Incident_Apps but when I save it, I get a syntax error. Here is the line of code:

Forms!frm_Incident_Single!tbl_Incident_Apps_subfor m.Form!Requery

I've tried many variations and can't get it to work. How I can refresh the subform?

View 3 Replies View Related

Onexit A List Box, Refresh A Combo Box On Same Form - How?

Aug 15, 2005

Hi All,

I have a form with a list box where you can add new names, and a bombi box that lits current names already in use. I want the form to update the combi with the name just typed in the list box. I guess I use OnExit event, but I don't know the code I should use for updating the combi list..

any pointers appreciated.

andy

View 1 Replies View Related

Problem With Bound Field Refresh On A Form

Jun 12, 2006

Hello All,I am new to Access and VB and have gained some very very useful tips from this site whilst compiling my new project.I have a question which I have been unable to find anywhere here.I have two tables at the moment. One is the main table from which my form is created. My second table is a list of registrations and the corresponding number of current hours accrued by the registration (eg ABC has 512 hours used)I query the rego table on my main form to give me a listbox so that for each new record, the user can select the rego, and the starting hours are automatically filled in the 'Start hours' field on the form (using an after update event to set the hours after the rego is selected), which is bound to the 'Start Hours' Field on the main table, so that when it is saved, the info saves to my main table.When the user returns, they then enter their Finish hours, and this finish hours is then written to the rego table, so that next time the rego is selected the start hours is the same number as the finish hours from the last time the item was used.Now for the problem. Users can fill out some parts of the form, and take it before the finishing hours are entered for the previous record. Therefore, when they return to enter their finishing hours, the starting hours hasn't updated on the form, and it doesn't change unless they reselect the rego from the list box to trigger the after update event.Is there any way, (I have tried, Me.Refresh, Requery etc) I can get the after update event to fire in the current form automatically, ie without having to reselect the same rego again? Is there a way to just refresh the rego field so that it thinks that it has updated and triggers the after update?I may have now made it clear as mud, but this is my first post so any help would be very much appreciated. I can elaborate on any problems if needs be.Thanks in advance for your help!

View 1 Replies View Related

Modules & VBA :: Add Code To Refresh Form After Change?

Feb 26, 2015

I'm working with a form someone else created and am adding a delete button. I've managed to add the button and get some code working which will delete a record from a table. The problem I'm having is that after the delete operation occurs all fields in the form, and the corresponding items below the form, show #Deleted in all fields. How can I force a refresh using code?

View 11 Replies View Related

General :: Refresh A Form On Closing Event

Oct 24, 2012

I would like to know how to refresh a form on closing event. The forms name is frmDeparturesPaymentScreen. I want to do this in a macro...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved