How Can I Convert A Week Number To A Month?
Sep 29, 2005
Help!!
I have 2 fields in a table one for a year and one for a week number that data is being collected against.
I need to change these to a month and year for the report. Is there a way to do this??
View Replies
ADVERTISEMENT
Jul 18, 2014
Recently, my parents have bought a campground and I agreed to attempt to build a database which they can useto keep track of openings, reservations and I want to be able to now calculate the price for the customer. I know I can easily create an "invoice" using the forms.
Originally, I thought this would be easy and it actually wasn't too difficult, I had everything set up to go. Then I hit a snag. The prices are by days, weeks, months and season and get slightly cheaper for each tier you go up. Charging for a week is cheaper than charging the daily rate seven times, makes sense right? it makes it difficult for me because, I'll use the example of nine days, for a stay like this you would charge for one week and two days.
I can't just convert the days stayed into a number like 1.3 weeks and multiply it by the weekly rate because it would be undercharging the customer by about $30 and this number would go up as the stay got longer. I know I could do something like an "IIf" statement but in order to cover all the variables, that would be a long equation with lots of spots where a mistake could be made.
Through doing research, and asking here, I figured that it would be best to develop a UDF which would take the number of days stayed and convert it to something which would count them and turn it into a number like "1 week, 2 days". From there I will have to figure out how to make it so that the program knows which sections to multiply by which rates to build the price. I have taken a course in Access and have a huge book relating to the subject but I'm not quite sure where to begin.
View 1 Replies
View Related
May 24, 2005
Hello everyone.
I would like to ask for help on my current problem.
I need to input a date on a text box and another text box say txtweeknumber should determine the week number the date falls on the current month.
for example:
May 1, 2005 should fall on week 1 and txtboxweeknumber should say Week 1
May 9, 2005 should fall on week 2 and txtboxweeknumber should say Week 2
May 17, 2005 should fall on week 3 and txtboxweeknumber should say Week 3
May 25, 2005 should fall on week 4 and txtboxweeknumber should say Week 4
May 30, 2005 should fall on week 5 and txtboxweeknumber should say Week 5
Same goes for all months.
Is there a function to determine which week number of the current month the input date falls?
Please help.
Thanks,
Edwin
View 2 Replies
View Related
Apr 9, 2008
Hi All - I would like the user to be able to import a month name (April for example) and then have access convert that name to a number (4) so that I can search for records that were opened before the month entered. I have been using:
MonthName(Month([CompletionDate])) = [Enter Month]
but
MonthName(Month([CompletionDate])) <= [Enter Month]
does not work.
Thanks!
View 1 Replies
View Related
Feb 4, 2008
Hi
I am struggling to get a number to change to a month name.
When the user chooses a month from a drop-down:
Value List
1;"January";2;"February";3;"March";4;"April";5;"May";6;"June";7;"July";8;"August";9;"September";10;"October";11;"November";12;"December"
I use the month number to run the query, ie: 1, 2, 3 etc.,
But I want the Month Name to use in the subsequent report.
I have no other data in the query other than a month number to use so I thought about an invisible text box that get's the month number and I could reference it from the report, but I just can't get the text box to get the month name from the drop-down.
=Month([Month4Query].[Column](2))
Maybe there is a better, easier way?
Martin
View 3 Replies
View Related
Oct 13, 2014
I have a table that has just Months in a column. As in January, February......
I want to convert these to Numbers as in 1-12 in VBA. I tried all the DatePart in every combination but can't seem to get the results.
View 5 Replies
View Related
Aug 8, 2005
Hi,
I'm looking for a module wich converts a date to a week.
Ex: i type 08/02/2005 and i obtain Week #2
(Some years have 52 and other 53 weeks, depend on the date of the 1st week of the year, an other problem is that some people say the week begins the monday, other say it begins a sunday)
Maybe a built in fonction exists.
Thanks in advance for help.
VINCENT
View 9 Replies
View Related
Nov 6, 2006
I have a query that groups records by date into week numbers using the following expression.
WeekNumber: DatePart("ww",[Date],2)
I would prefer to display the result as the week commencing Monday date.
How?
View 13 Replies
View Related
Mar 3, 2006
I need a formula that will return the nth full week of the month that specified date falls in.
Example:
03/31/2006 would be "5" - the fifth full week of March
20/13/2006 would be "2 - the second full week of February
I've tried using a formula that subtracts the week number for the 1st of the month from the week number the date falls into, but it's just not working as I expect it to.
format([ETA],"ww",1) - format(date(format([ETA],"m",1) & "/01/" & format([ETA],"yy",1),"ww",1)
View 3 Replies
View Related
Feb 20, 2007
Good day!
I'm planning to create a form that would show total number of sales transaction per week: If today's month is February, i would like users to see records like this: (Week should start on a Monday and ends on Saturday)
GroupNo______Week1_____Week2_____Week3____Week4___ _Week5___MTD
GroupA________12_________2__________10________11__ _____15_____50
GroupB_________8_________5___________7_________1__ _____21_____42
I can't find a sample code for this particular date criteria. :-(
Thanks in advance!
Sheila
View 6 Replies
View Related
Mar 3, 2014
I have found multiple ways of calculating the week of a month for a given date. Now, I want to reverse it, i.e. given a month and week and day of week calculate the date.
Note that in week 1 and last week, there will often be days with no value.
View 2 Replies
View Related
Sep 23, 2013
I am trying to return a value in an expression (call it FundedPeriod): CurrentWeek, CurrentMonth, PreviousMonth, based on a date value in field [funded_date].
Here are the criteria I am using:
Current Week: DatePart("ww", [Funded_Date]) = DatePart("ww", Date()) and Year([Funded_Date]) = Year(Date())
Current Month: Year([Funded_Date]) = Year(Now()) And Month([Funded_Date]) = Month(Now())
Previous Month: Year([Funded_Date])* 12 + DatePart("m", [Funded_Date]) = Year(Date())* 12 + DatePart("m", Date()) - 1
Based on example, I expanded upon that and came up with this:
Code:
Function FundedPeriod(FD)
' returns CurrentWeek or CurrentMonth or PreviousMonth or None based on FundedDate (FD) criteria
Dim ret As Boolean
ret=CurrentWeek
[Code] ....
Am I in the ballpark w/ this in order to return:
CurrentWeek or CurrentMonth or PreviousMonth
so in the query expression I think I would type FundedPeriodName: FundedPeriod([funded_date])
View 5 Replies
View Related
May 5, 2014
I am trying to create a database that will keep track of the orders placed for a given part number by month. Currently, my table houses the part number, and the ordered amount for the past three years by month (there are thirty-five columns for every part). My column headings are ORDER_MAY_2013, etc. I would like to set a query up that will look at the column headings and pull the amounts ordered for each part for the past twelve months. In other words, I have three years of data in my table. In my query, I just want one year. However, I don't want to have to rewrite the query every month so that it will pick up the new data. Is there a way to accomplish this?
Is there a better way to build this database? I thought about just have four columns in my table - PART_NUMBER, ORDER_MONTH, ORDER_YEAR, ORDER_AMOUNT. The only problem there, is that every part (there are about 450 parts) would have to be listed 35+ times. That seemed too redundant to me, so I built the table this way. However, now I am having trouble querying against it.
View 2 Replies
View Related
May 31, 2007
Hi
Would be great if I could get some help on this:
I have big table that gets updated almost every day with new data. There is a date column. I have a Form where I can enter queries. I need to add a panel where I can spcify if the query should involve the data should involve the date from last week only, from the last 2 weeks, from the last month or if the query should involve the overall data.:confused:
It somhow need to be check what the date is today and then caclulate back.
Any help on this would be much appreciated.:D
Thanks
Daniel
View 6 Replies
View Related
Dec 31, 2014
I have a query based form i use to gather data to generate a report. I have 2 forms Form A is where users open all reports from. On form A i have 2 unbound fields "Report Start Date" and "Report End Date" my queries us these from Form A as the criteria for the queries. I have like 30 reports using this method and it works great. I am now building 2 new reports, a monthly and a weekly report. These reports required and data entry point so i built "Form B"
I created my tables for these reports and went through and created the records. So when a manager needs to enter data for any given report they would us "Report Start Date" to identify what record they want to work with, so if they want to enter data for the December report the would select 12/01/2014 and then open "Form B". This works great and the report looks as good as any Access report can.
Now they are asking to add to "Form B" a comparison to the previous month or week depending on the report. for example:
This month we did 250 units
Last month we did 300 units
so we did 15% less
"Yes my math is not exact"
They don't need to see last months data but i need a way to query the previous record to compare the data
This is the criteria code i use in the query that "Form B" is based on.
Code:
[Forms]![Form A]![Report_Start_Date]
I am pulling up the 12/01/2014 in "Form B" but need the 11/01/2014 record floating behind to compare data.
How can i use the same setup but pull a 2nd record? I am thinking i can use a 2nd query but with different criteria.
View 3 Replies
View Related
Feb 28, 2014
I am trying to convert a week which is entered in a text box on a form to the first day of the month in which it falls.
My text box (txtdw) is in the format yyww and I want it to be converted to 01/mm/yyyy.
example: 1401 would convert to 01/01/2014. 1406 would convert to 01/02/2014.
I am pretty close, I can get to the correct month but I can't work out how to change to the first day of the month.
Code:
DateAdd("D", Right(Me.txtDW, 2) * 7, DateSerial("20" & Left(Me.txtDW, 2), 1, 1))
View 4 Replies
View Related
Aug 17, 2015
I have 2 columns that are listed as such:
AssumptionMo AssumptionYr
MAY 2014
JUN 2015
JUL 2015
OCT 2016
I need to create a field called AssumpDate that converts the month into a date field on the 1st day of the month. ex May 2014 needs to read 5/1/2014. When I use the expression AssumpDate: DateValue("1-" & [Assumption_Month] & "-" & Year(Date())) of course the year changes to the current one--2015. How can I I change the expression so that the year is based on the AssumptionYr column?
View 3 Replies
View Related
Nov 22, 2011
This has to be a simple way to convert a positive number to a negative number. For example, convert 5 to -5. The field is quanitity and I wanted to convert to negative number. I tried to use negative = "-" & [quantity] but it doesn't work.
View 2 Replies
View Related
Apr 20, 2008
I need to create an auto number for service calls that show the following:
year as 08, 09 etc, month as a letter, Jan = A, Feb = B etc then an incremental number starting at 300 for each month/year combination.
So for example: 08A300
Can anyone help me as I am stuck?
View 10 Replies
View Related
Oct 29, 2006
Hi,
I will really appreciate ur help. I work on Access-2000 database and have a problem. I need to get the number of the week. So i used the funktion as a standard value as following:
"=((Monat(Datum())*30,5-Tag(31-Datum()))/7)"
It shows me for today 39 instead of 44.
Could u please help me and tell me why this funktion doesnt work?
Thanks in advance
View 5 Replies
View Related
Jan 18, 2006
I have a large report that runs a six weeks average based on the last six weeks of production. Our fiscal year starts November 28th and our weeks starts on Monday.
I have used the following format to start the week on Monday
Week1: (DatePart("ww",[EntryDate],2))
To set up the fiscal year I used the following format in my query.
FiscalYear: IIf(Format([EntryDate],"mmdd")>"1127",DatePart("yyyy",[EntryDate])+1,DatePart("yyyy",[EntryDate])) . The criteria is 2006
I have a Weekending table that I have all the weeks listed including the weeks in calendar 2005 that are included in our fiscal 2006 that I have linked to my query.
When I run the report, it will not include weekending 1/1/06 (Week 1). It is totally eliminated. There is probably a conflict in the above formats, but I am not knowledgable enough in Access to figure it out. I have been searching this site without success. I would appreciate any help I can get. Last week I had to do the reports manually because I couldn't get the works to run right.
Thanks,
View 1 Replies
View Related
May 14, 2007
Hi Folks,
I use this to get a week number for a date range:
WeekNo: DatePart("ww",[Timestamp])
Is there a way that I could also get just the first date from that week number to appear in the query as well?
ie. if Week 1 is 3/1/07-3/7/07 the query would show 3/1/07 as well as week 1. TIA
View 1 Replies
View Related
Feb 8, 2007
hi
i am in a situvation that i have to identify the dates which comes under particular week1 or 14.
View 3 Replies
View Related
Aug 23, 2005
Hi,
I've got a combo box that uses
DatePart("ww",[Date],2) AS WkNum
to obtain the week number.
How would I obtain the start date and the end date from just the week number?
Is it also possible to change WkNum to the week number of the selected month?
E.g. if December is selected, instead of week 53, show week 5.
Any help would be much appreciated.
View 2 Replies
View Related
Apr 10, 2008
hi
i would like to display the date and week number on one of my forms but have no idea about dates and how to code this.
can some one help? id appreciate it it beyond me :confused:
thanks :)
rob
View 4 Replies
View Related
May 17, 2005
Is it possible to query using the week number in the year as criteria. For example instead of putting 13/05/05 to 20/05/05 can we use week 12 - the idea is to save on keying info in each time.
View 5 Replies
View Related