Hello,
I was wondering how to check a date in a table vs current date and
then put a yes/no in a colum if the date in the table is past current date.
In the form I know it should be wrote in the Upon Open Event
But I am unsure of the code.
Thank you for your time,
Derek L
I am building a database to track contract of employees so that I can know which contracts are valid and which are expired.
My table has the following fields:
ID (Primary key)
Employee ID (Foreign key to link to the employee table)
Start_Date
End_Date
Status (Either valid or expired)
Challenge
I want when I enter the end date, the system checks the end date against the current date and fills in the status field with either valid or expired as appropriate. For instance if the contract end date is March 10,2016, the status must be filled in the word valid.
I have a report that displays simple date fields. One of the fields is "lease execution". On the report, I want "lease execution" to display differently depending on the date the report was run.
So:
- If the "lease execution" date is more than 120 days away from today, I want it to display as Q YYYY.
- If the "lease execution" date is between 120 and 90 days away from today, I want it to display as MM/YYYY
- If the "lease execution" date is 90 days or less away, I want it to display the normal date MM/DD/YYYY
I was thinking I would need to do DateDiff() to figure out an amount of days that's between Now() and [Lease_Execution]. Then based on that amount make the report show it differently. Pseudocode would be: if DateDiff() = 40, then display [lease_execution] as MM/DD/YYYY
I want to create a form that will update several tables at the same time.A field that is important in each table is "ID" and "DATE" date being the current date the record is being created and ID is the Unique ID of user creating the record.These 2 fields should be incorporated in the different tables without the user having to identify himself every day or to add the date all the time ( I want the system date to be automatically used)
View 4 Replies View Relatedi have just started to use access and i know how to insert the current date into a field using date() but i am not sure will this change the date everytime i open the form ? i want to create a form for invoices that shows the date the invoice was created and doesnt change if i re open for editing,
View 1 Replies View RelatedI have this table that records sales events for properties, with multiple sales records for some parcels. Each parcel has unique field: MapTaxlot. I want to create a select query or make table query that shows only the most recent sale event for each parcel. Instrument_Date is the date field for the sales records.
See attached example of the data table below.
What is the simplest method to accomplish this?
TableSnip.JPG
I am using access 2010. I need to rename a table when I import the a new table. But I can't get the docmd rename code to work. I also want to append the current date on the end i.e.
docmd.rename, "tblOldTable(Currentdate)", actable, "tblOldTable"
doesn't work.
I have a form, has some fields, one of them is the current date, so when the user click (save )button , which make (add new record )to the only table I have the problem that .all fields are inserted in the table , except the current date !! it is a text box ( Now() )!!
View 1 Replies View RelatedWhat I really need is for when the form opens, it looks at todays date, then matches current user and then goes to that record for today, if no current user there, then will goto new record..
i know, sounds complicated, and probably is really easy, but my heads not with it today, as about to get drunk as its my 40th, and got people ringing and texting and still trying to get this done....
I've included a copy of this database, named Timecards..
i have 2 tables.. 1 with bookings and 1 with a BonusPeriod range.
in the Bookings table there is a field called [ServiceDate]
in the bonus table i have a field called [Period] which is text i also have 2 dates, [StartDate] And [EndDate] i need to Dlookup the Bonus table to return the value of the period table based on where the [ServiceDate] falls.
i dont want to use VBA (i really need it to work within a query that inserts it's data into another table)
i've tried everything but had no joy
Expr1: DLookUp("[Period]","BonusPeriods","[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","[Staff_BookingsAndQuotes_Master].[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","(FormatDateTime([ServiceDate]),"yyyy-mm-dd") Between (FormatDateTime([BonusPeriods]![StartDate]),"yyyy-mm-dd") and (FormatDateTime([BonusPeriods]![EndDate],"yyyy-mm-dd"))))
I am trying to make a report, that will tell me how many days left to the birthday of a person. I have tryed to use =now(), but I get problems, can I put it in a query or whats the best way to do it.
View 1 Replies View RelatedI would like to get the next date of current date in MS Access.
Access has any macro to support this or we have to compute?
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code:
Private Sub Update_DOD()
Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset
Dim DOD As String
rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code:
CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
How can I add 7 days in todays date to store target date in the table?
Code:
ssql = "Insert into tblUpdate([Update_ID],[Date],Username,Status,Target_Date) values('" & j & "',#" & Format(Date, "mm/dd/yyyy") & "#,'" & k & "','Open')"
CurrentDb.Execute ssql, dbFailOnError
I want the query to return the results of all records that are for the next day.
Sort of like =Date() +1
Please help
There is a Date Submitted in my form that I would like it automatically poplulated with the current date. How do I do that?
View 1 Replies View RelatedI have a table, tblVisits, holding patient's pre and post surgery visits:
Code:
PatientID VisitDate
1 1/5/12
1 3/10/12
1 9/1/13
2 ...
And another table holding patient's surgeries (each patient will have only one surgery)
Code:
PatientID SurgeryDate
1 4/1/12
2 ...
I need to compare these two tables and create a variable that indicates which pre-surgery visit date (i.e., VisitDate < SurgeryDate) is closest to the surgery date. In the above example, it would return:
Code:
PatientID VisitDate ClosestToSurgery
1 1/5/12
1 3/10/12 Yes
1 9/1/13
2 ...
I've tried various MIN and MAX approaches and can't seem to get it right.
How do you automatically put in the current date in a table?
View 3 Replies View Relateddear all
what is the difference between current date and system date?
for current date : =now()
for system date : =date()
am i right as above?
many many thx
Hello,
I have about 1500 records in a table. We use a form to search through the records to find info on certain accounts. We now want to only search through accounts that are current, so I made a query to see only current accounts. I switched the search form from going off data right from the table to the new current date query. Now when you load the form it says "running query" and the application stops responding. The query seems to load up quick in raw format.. how come the application freezes when searching using the query instead??
thanks,
Matt
Hi there, I am trying to put a query on my form which selects the most recent date of a members attendance from an attendance table and displays it in a text box, the code I am using is:
Private Sub Text41_BeforeUpdate(Cancel As Integer)
SELECT MAX(Attendance.AttendDate) as "LastAttended"
FROM Attendance
WHERE Attendance.membershipNo = Forms!Customer.sbfAttendance.Form.membershipNo
End Sub
Customer is my main form and Attendance is my subform. I think the mistake is that I dont have a field called last attended (you are not supposed to store data like this are you) and I need it to display in my text box (text41) on the main form
Thanks in advance,
Jon
When I print queries (and maybe forms) I would like to have the date printed on the sheet so I know when I printed it out. How should I do this??
Thanks
Hey guys,
I'm trying to pull data that has a due date within 30 days from the current date. I'm trying to use
WHERE x <= Now() + 30
but I'm getting incorrect records. Can someone please help me out? Thanks.
Maybe a simple question, but i do not know how to put the current date in the WHERE clause of a SQL query.
The query i have so far:
select [table1].*, [table2].* from [table1], [table2] where [table1].[field] = [table2].[field] and [table1].[enddate] is null
After this there has to be something like
and [table1].[begindate] < [Date] (where [date] is the expression)
I know that with Date() or Now() the expression can be made, but i do not know how, please advise..
Thanks in advance
Hi,
I hoping someone can assist me here, I've looked through the forum for other date related threads raised, but none seem to assist me with what I need to achieve.
I have created a query with an appropriate date field, and I am can't seem to work out how to write the correct formulae to get the query to only show data with a date range for the current month only.
I don't want the user to be prompted to enter any information, I want the query to automatically always, when in the current month only show data for the current month.
Any assistance would be most appreciated.
John
Help!
Im trying to get a text box on a form to always automatically insert the current date. This seems like it would be so easy to me but apparently im stooopid.
Thanks to anyone that can help.
( I already have the field in the table, and its in the query)