I have a form that has a subform in it. I want the key field in the form to dictate what fields show up on the subform. When I try to set the Link child and master fields, I get a 'can't build a link between unbound forms'. How do I make this subform bound to the form????
Thanks, JOe
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
View 1 Replies View RelatedI have a unbound form in my data base now i want to bound it to a table in the database .
how to do it
I have a database that has student table (I am not a student doing an assessment!) with a one to many relationship to coursebooking and then a course table that has a one to many relationship with the coursebooking table so coursebooking seems to be acting as the link table between the many to many relationship. (I didnt design it).
I am creating forms to make the booking process faster and to perform the correct sums to produce an invoice and update a financial transactions table along the line.
I have an entry form that creates the student, and then other forms synchronise to the master form and gather the data. I am now at the point of wanting to get product details so ex course A, taxi to school and enrolment fee and add these to the booking table.
Historically the process was messy and couldnt calculate course A cost (per week) times by number of weeks.
I want to be able to select the products from a combo to build up an invoice and then once acknowledged as details correct commit to the tables coursebooking and transaction table.
I am not sure how best to achieve this ie is it best to have a bound form to the booking table and add new records to it line by line or to use an unbound form and some kind of product picker and to see the products built up perhaps using vba and storing products in an array until ready to post.
Some advice would be most welcome.
regards
Peter
:eek:
I'm trying to change the display of a bound control on a form to a linked field in another table. Seems like it should be easy to do; I just can't figure it out.
The bound column is [StudentEnrollment]![AnnualClassNumberID] and is linked to a table called AnnualClassNumbers. The field I want to display is the ClassNumber from the is the AnnualClassNumbers table.
I'm having a bit of a problem - I built quite a complex db that works great and I'm comfortable with code and access. But, I've been working with ASP for a while now and I think it has made me a bit fogetful re: Access.
If someone can point me in the right direction conceptually it would be appreciated. My system is primarily built around scheduling and I have created tables and web forms to interact with my current access database to allow our recources to check and confirm their daily schedules online.
My problem is on the Access side. I need to build a dashboard using a form that queries the table that holds our resources status information and will display whether or not they've logged in and confirmed their schedule. As well, I need controls on this form to allow me to update their individual schedules if it has been changed. Most of this is no problem, the big problem I'm having is the display of information and form interaction... Can I use a continuous form for this?
When I try to use unbound controls such as images - hiding/unhiding images depending on a specific records value (for let's say a traffic light that shows whether a resource has confirmed their schedule) - it seems that I can't control images, checkboxes, etc. for individual records on the continous form with code as all these unbound controls defualt to the value of the first record.
Hello All,I am new to Access and VB and have gained some very very useful tips from this site whilst compiling my new project.I have a question which I have been unable to find anywhere here.I have two tables at the moment. One is the main table from which my form is created. My second table is a list of registrations and the corresponding number of current hours accrued by the registration (eg ABC has 512 hours used)I query the rego table on my main form to give me a listbox so that for each new record, the user can select the rego, and the starting hours are automatically filled in the 'Start hours' field on the form (using an after update event to set the hours after the rego is selected), which is bound to the 'Start Hours' Field on the main table, so that when it is saved, the info saves to my main table.When the user returns, they then enter their Finish hours, and this finish hours is then written to the rego table, so that next time the rego is selected the start hours is the same number as the finish hours from the last time the item was used.Now for the problem. Users can fill out some parts of the form, and take it before the finishing hours are entered for the previous record. Therefore, when they return to enter their finishing hours, the starting hours hasn't updated on the form, and it doesn't change unless they reselect the rego from the list box to trigger the after update event.Is there any way, (I have tried, Me.Refresh, Requery etc) I can get the after update event to fire in the current form automatically, ie without having to reselect the same rego again? Is there a way to just refresh the rego field so that it thinks that it has updated and triggers the after update?I may have now made it clear as mud, but this is my first post so any help would be very much appreciated. I can elaborate on any problems if needs be.Thanks in advance for your help!
View 1 Replies View RelatedI have a form which I've spend many hours designing to look and behave as I need it. It is bound to a table (get's it's data from there). I now want to add one or more new fields to the table (which I've done ok), but I can't seem to get the Form to see those fields. I've tried creating new controls on the form and the control source list to select from doesn't include my new fields.
Even if I write VB code embedded in the form to refer to the fields, the debugger trips on the field names saying no such method/object. The only way around it I've discovered is to create a new bound form which will mean re-dooing al the layout work again.
Surely this is a common situation which has an easy solution ?!!
My code is not working.
1. The code below should equal the Current Month
2. It does not close the form if no data.
PHP Code:
If DLookup("[CurMonth]", "tblEmpEvaluation") = Format(DateSerial(Year(Date), Month(Date), Day(Date)), "mmmm ")
DoCmd.OpenForm "frmEvalNotice"
End If
PHP Code:
If DLookup("[CurMonth]", "tblEmpEvaluation") <> Format(DateSerial(Year(Date), Month(Date), Day(Date)), "mmmm ") Then 'No Data. NotWorking?
DoCmd.Close acForm, "frmEvalNotice"
End If
i want to use vba to lock or diable a date box on my form.
I have used[button].Enabled = False
This works ok for buttons but doesn't seem to work for my date
fieldMe.OrderDate.Enabled = False
I get an errormethod or data member not found. it highlights the .Enabled part...
I am looking for a complete working example of a fabricated ADO recordset bound to a form. The purpose of this is to provide a selection tool for records of a table in a multiuser database.
I could do this using a table to store the selections in the db, but I want to get a tool I can reuse in the future, obviating the need for extra tables and keeping track of users and multiple copies of the application ran by the same user.
So far I can display MEMO text, all the other values of my recordset (yes they are present) generate #ERROR in the form controls.Yes I did google. Apparently I am not the only one with this problem, but the solutions range from bizarre to weird.
Code:
.Append "MailSubject", adLongVarWChar, 10000
' .Append "MailSubject", adVarChar, 255
.Append "MailBody", adLongVarWChar, 10000
.Append "MailID", adBigInt
.Append "MailTemplateID", adInteger
.Append "RevisionID", adInteger
.Append "SentOn", adDBTimeStamp
.Append "myField", adInteger
Any complete (with form) working example that includes at least one integer field in a record ...
I have a form and subform. The main form shows some customer details, and the continuous sub form shows that customer's charity donations.The code below runs when the form opens, and binds ADO recordsets to the two forms. The binding appears to be successful.
However whatever I do I can't make the subform update correctly to show the relevant customer donations. For example, when I use the **'d lines to update the link child/master fields, I get a "Data Provider Could Not Be Initialized" error.
Code:
Private Sub Form_Load()
Dim cn As New ADODB.Connection
Dim rsCust As New ADODB.Recordset
Dim rsDons As New ADODB.Recordset
[code]...
I have a form based on a query. I'd like to add a search box to the top to look up values and then populate the rest of the form. I can't do it with the combo box wizard because the relevant (third) option doesn't show up, I assume that's because the form is based on a query not a table.
Any alternative method of adding a search?
I have a bound form that normally is opened via macro. Very straight forward just has the following in the where.
Code:
[userID]=[Forms]![Home]![txtSelectUser]
I'm trying to open the same form via doCmd.
Code:
DoCmd.OpenForm "frmUserInformation", , , "UserID=" & Me.txtProblemID
I've msgbox'd the txtProblemID and the correct ID is being passed. Where I fall into an error is on the frmUserInformation's onLoad event which uses the ID form the frmUserInformation.txtUserID box. The error I get is "Syntax error (missing operator in query expression '[fldUserID]='."
Code:
strEndMonth = DLookup("fldDateExpiration", "qryUserExpirationDate", "[fldUserID]=" & Me.txtUserID)
What I've narrowed it to is the timing between the docmd.openform and the onload of the form. I've tried changing the onload to be on activate - and it just opens empty.
how to get the docmd to open the form correctly before the onload tries to fire?
I have a number of forms that are bound to recordsets as follows:
Dim rs As New adodb.Recordset
sqlQuery = "Select * from myTable"
rs.Open sqlQuery, sqlCNN, adOpenKeyset, adLockOptimistic
Set Me.Recordset = rs
Set rs = Nothing
In Access 2003, users could open these forms and filter on basically any field by using the right click-> Text Filters functionality.
In Access 2010, this functionality appears to work (users can apply the filter and the Toggle Filter button in the ribbon shows a filter is applied), but all of the records are still visible in the form.
Any work-around that does not involve redesigning the form to be non-recordset bound?
I'm using Access 2007. I've created a table with two fields. "Novice and Recertification" as in combo box.
I put it on the form. Now the idea is when a user clicks Recertification, it shows up on the report. When the user clicks on Novice, it should be empty on report (Reason why I want to keep novice is so that we have a record of it.)
Now the challenge is I added another column, empty field for Novice and Recertification for Recertification. Thing is if I set the bound column, I select on an empty field on form and it will be empty on report. But I want the user to see Novice on the form and it must not show on the report.
On my form, I currently have a combo box that updates text box data with each new selection. However, after these text boxes for FirstName, LastName, etc. are updated, they cannot be edited. Here is the error message that appears in the status bar:
Control can't be edited; it's bound to the expression '[Form]!EmpList.Column(13)'
I'm thinking it might be a result of the data source for the text boxes being a combo box expression.
Any suggestions on how to fix this?
Thanks. :)
I can't make edits with ADODB recordset bound to my form.
Access 2010 linking to SQL Server 2008.
Simple form bound to a single table.
Connection string works fine.
Code is as below (cursor etc is set using enums btw).
Private Sub Form_Open(Cancel As Integer)
Dim rst As ADODB.Recordset
If g1OpenRecordset(rst, "tblName", rrOpenKeyset, rrLockOptimistic, False) = False Then
Cancel = True
Exit Sub
[Code] ...
So I'm not new to Access but I am to 2010. It has been a bit "challenging". Here's my first question:
1.) I'm trying to search on a field by using a command button. I basically want to click the button and the following message pops up: Enter MRN.
2.) When the MRN is entered, I would like the form to filter on all records that have this MRN.
3.) In old versions of Access, I would create a Macro for this and then call the Macro in the form.
4.) I've tried the FindRecord action in the Macro but it does not work. I actually came across several actions that don't seem to be working properly (getting error messages).
5.) In my head, this should be one of the EASIEST things to do. I've done this before in several different databases. I will admit it has been a few years since I have used Access for this (ie. building forms, macros etc.). I've primarly used it to pull in a data set and then run some queries to get the data I need quickly versus using Excel.
I have a form AddNewEquipment. This is bound to a table, EquipmentDetails.
EquipmentDetails has a Yes/No field, 'ParentChoice'. So when EquipmentDetails.ParentChoice = Yes, I want to open up a new text box, AddNewEquipment.ParentDescr, into which someone can put some text. This text I want to append as a new row in a different table, ParentList.ParentName. (that table also has an autonumber field)
I only want to do the save when I save the whole form.
Is this something like using an On Lost Focus event from the ParentDescr field which only invokes when the overall form save button is clicked? What would I put in the On Lost Focus event.
I have been working on a bound form that I can't seem to get working.
It records deliveries and what I am trying to achieve is after the form has been filled in the user will click a save button where the record will be added to the table and a record automatically printed via a report and emailed to the shop manager, but i keep getting the error "No Current record" no matter what way I try to do it, I have tried using to run the report. Is the best way for me to accomplish this o change it to an unbound for and run an insert query on click?
I have attached a copy of what I have been working on : DatabaseDelivery.accdb
I have a report that generates 100 items in alphabetical order. All of the items are also displayed in a table. I have a bound form attached to the that table, and when the items appear they are not in alphabetical order. Therefore, it is a hassle typing in the data when the form will not appear in order, because instead of going in order I am flipping through pages. What is causing this to happen? And what can I do to fix this?
View 2 Replies View RelatedI have a Split form displaying parts information and have all data displayed from the table including an obsolete field which is a Yes/No checkbox.
I want to display ONLY unchecked fields on a button click. I have tried this code so far but it didn't seem to have any effect
Private Sub cmdCurrent_Click()
Me.chkObsolete.Visible = Nz(Me.chkObsolete.Value, True)
Me.Requery
End Sub
Commands:
- cmdCurrent = show all unchecked fields
- cmdShowAll = show all fields
- cmdSearch = filter based on textbox entry
Other: There is also a hyperlink in each field (on the form only) to open each individual record for editing.
Field in question is chkObsolete
Command in question cmdCurrent
I have created a form that is bound to a table.
There is a button on the form that allows users to send email with the form as an attachment in pdf. I'd like to create a date/time stamp in another table called tblLog. Trouble is the code works uptil sending emails but it doesn't record the stamp.
Heres what I've done so far.
Private Sub cmdEmail_Amd_Click()
On Error GoTo cmdEmail_Amd_Click_Err
DoCmd.OpenForm "frmAmendment_Master", , , "[Record_ID]=" & Me.Record_ID.Value
DoCmd.SendObject acForm, "frmAmendment_Master", "PDFFormat(*.pdf)", "", "", "", "Amendment Form" & " " & Surname & " " & Firstname, "", True, ""
[Code] .....
I would like to populate form fields with records from a table/query so that they are bound to the recordsource and the record to be displayed can be selected from a combobox. I am hoping that in this way, any changes made are propagated to the original table.
I have created a combobox from which the primary key can be selected and added all the fields from the table appearing on this form as values.
In my Change event for the combobox I have this code:
Private Sub cboID_Change()
Me.RecordSource = "SELECT b01_Participants.*FROM b01_Participants WHERE (((b01_Participants.ParticipantID)= " & cboID.Column(1) & "));"
Me.Refresh
End Sub
However, I receive an 3075 error when this code runs which seems to relate to my syntax or an extra ")".
I am working on a web database with a form which is bound to an underlying web table where the submissions occur.My challenge is that the fields on the form get submitted to the table even before the submit button is clicked regardless of whether the form was completely filled.
My request is that I want the form to only submit to the submission table only when the submit button is clicked.When I searched on the net, the only solutions I got are VBA written code but my web database cannot use VBA code.
VBA code:
Option Compare Database
Option Explicit
Private blnGood As Boolean
Private Sub cmdSave_Click()
blnGood = True
Call DoCmd.RunCommand(acCmdSaveRecord)
blnGood = False
End Sub
[code]....