How do I set my table to sort all entries by time? I have Auto Date formatted for a date field but I have a time field that needs to be sorted in ASCENDING order so that any entries are sorted by time.
This is a phone log file that calls need to be returned in the order received according to our phone system.
Thanks!
I am trying to put together a form where employees will be entering maintenance information into my database. One of the requirements for this data is that when they perform repair work on an asset, they have to list a problem, cause and remedy. These are codes that are specific to each asset.
The closest thing I can think of to what I am trying to acheive is the selectors on car search websites. You select a MAKE, and then the MODEL list is narrowed down based on that, then you pick the TRIM, which is narrowed down based on the model selection. I have an Excel spreadsheet of the Assets(Failure Class), Problems, Causes, and Remedies...I'm just not sure how to put this into Access to get the desired output. I have attached a sample of the Excel spreadsheet for illustration.
I believe I'm going to have to put each of the columns in a seperate table and use relationships..but I'm not sure about that.
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
Hi,
Over the past three months I have been trying to develop an application which can repeat appointment entries.
I would like to have the option to repeat an appointment entry for a given number of weeks.
For example if an appointment entry was placed for today (Wednesday), there would be a command to create additional duplicate enties for the same day of the week for a given period of weeks ie say every Wednesday for the next 52 weeks.
Any help on how I could approach this would be very much appreciated.
Thanks
im in the middle of developing a database to log DOWNTIME of various machines in the factory. Basically myself and others will use it to log breakdown details and the amount of time (in HH:MM) the machine was off.
I have a form which will list details of a certain machine in a list box which i can populate using a query.
The list box will display 3 columns: Date of Breakdown, Machine Name and Downtime
I then have a text box below this that i would like to display the TOTAL amount of downtime for that machine (The listbox may have different information in it depending on the query criteria, e.g. It might display a certain month for a certain machine).
THE ISSUE i am having is its proving to be difficult to get the correct sum of the accumulative time to display correctly in the text box.
Is there a way i can use a query to calculate the total time of a column and return a value which is formatted as time (like this hhhh:mm or dd:hh:mm) or preferably use some VBA code on the form itself to total up the DOWNTIME column of the list box and display it with the correct format in the text
I have gotten close, but as the total amount of time exceeded 24 hours, it went past 00:00. I'm assuming it treated it as a clock and went into the next day? This is NOT what i am after, i need the total amount of days, hours spent on the machine and not a time of the day.
I have a text box linked back to a table and I am needing to be able to make multiple entries at one time for this text box but when I enter the first number and hit tab all the other text boxes that are linked to this one in the table show the same number....
View 2 Replies View RelatedIn access 2007, I was wondering if it was possible to have multiple people enter information in a form at the same time and have it save? The database is split so that multiple people can be in the whole database at one time, but when two people enter information in the form at one time... only one of the two can save...
View 2 Replies View RelatedThe recordsource is a query with over 6,000 records. The form currently lists the records in datasheet format with header and footer for things like buttons and filtering. The client wants to be able to go from page to page of the souce query, showing 100 records on the form at a time.
But at the same time, they should be able to filter or sort the data source in it's entirety. The person who created the form came up with what seems like an awful solution to the problem. It seems to use a random number generator to determine how many records to portray at a time. I see this in the code as well as in operation, because the number of records on page to page varies. It doesn't even start out at 100! Worse yet, using a sort on the page only sorts the records that are visible.
I have a table in access which is updated weekly; I need to create two tables from this updated table.
1st table will consist of all the new entries for the current week
2nd table will consist of all the entries from the previous week - an amalgamation of all the entries which are not from the "current week" (table) For example; the table below shows the two entries from last week.
ID
Name
1
Adam
2
Ben
This week I have three new entries New entries
ID
Name
3
Charles
4
Richard
So when I run the same query next week I will get something like this.
Old Entries
ID
Name
1
Adam
2
Ben
3
Charles
4
Richard
[code]....
How do I get a query /queries which divides up the weeks new entries and also all the old entries.
i made a report based on a query. when i run the query, my results are sorted by Job Time Ascending, like i want...
when i made my report i chose job id as the main group priority in the wizard..
now in my report it displays the jobs in ID ascending, rather than Job time ascending as my query says..
i dont want to re-do the report it took ages.. how can i fix this?
Hi all,
I have a form in Access 2K that properly displays city, state and zip codes. As I type in each letter of a city's name into the combo box, I get the first city in the sorted list displayed (autofills). That's fine when there is only one zip code for a city, but when I enter "chic" for chicago I still get the first chicago zip code in my table.
It sure would be nice if I could do a "sort within a sort" so that if there were two or more records with the same city name then that whole group would drop down so I could choose one of the other zip codes. If this is doable, kindly point me to an example as I need all the help I can get.
Thanks in advance for any responses.
D
I have a query that sorts players batting averages from highest to lowest. When I run the query just by itself it sorts it right however when I open the report based on that query it does not sort in descending order like I asked. What am I missing??
View 3 Replies View RelatedI have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View Relatedhow to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM
[PunchOut] = 11/23/2013 5:43:30 PM
[ShiftLength] =DateDiff("n", [PunchIn],[PunchOut]) = 572 minutes.
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View Relatedso i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedI have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedHi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
Hi all, I havent' been around in a while (toddler, work, getting my BS degree and new baby coming in a week and a half) so I am hopefully not asking a previously posted question.
I'm suspecting my new work isn't accurately paying for the hours worked. I made a quick simple DB where I input my punch times in short time format. There's the typical In, Out for Lunch, In from Lunch, and Out. I've got it correctly adding the times so that it reports the total hours worked per day, though, in order for it to display correctly, that total is in short time as well.
The problem is, when I group a week together, as soon as the sum of the totals reaches 24 or more, it goes back to 0, as it's on the idea that there's only 24 hours in a day.
Hopefully, it's just a formatting issue or is there a function to convert the times (or just the sum) to number of hours?
Thanks and Happy New Year to all.
-Jim
I am trying to create an Access database where I can let the employees enter their time-in and time-out, at the end of their shift. I already created this function working, but running into another issue. Everyday, employees need to enter a break. Sometimes they take a break and sometimes they don't, if they work shorter hours. Thus, the break is not a default 30min and has to be enterd by the employee.
Below is the code I have to calculate the total hour:
txtCalcTime has the below code in control source:
=Int([CalcTime]/60) & ":" & Int([CalcTime] Mod 60)
Control source for this form "FrmTimes" property, in which Txtcalctime resides:
QryTimes
"QryTimes" query has the code below:
SELECT TimeID, TimeIn, TimeOut, Brake, DateID, DateDiff("n",[TimeIn],[TimeOut]) AS CalcTime
FROM EmpTimes;
This shows the total number of hours worked. But how can I make it to substract the break time entered by the employee in "txtbreak" on FrmTimes
I have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE
FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID
WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
how i get end time due to CHECKTYPE]=O