Hi everyone, I am new to this so bear with me.
I currently have a form with textboxes and 2 combo boxes. I have a submit button at the bottom of the page and would like this to take all the infomation from the form and add to a master table.
I was hoping to be able to create a pop up message to say "This item has been added to the database"
Can anyone help point me in the right direction?
Many Thanks!
Hi everyone, I am new to this so bear with me.
I currently have a form with textboxes and 2 combo boxes. I have a submit button at the bottom of the page and would like this to take all the infomation from the form and add to a master table.
I was hoping to be able to create a pop up message to say "This item has been added to the database"
Can anyone help point me in the right direction?
Many Thanks!
Hi There
I am wandering if anyone has a solution to this problem i has basically have 2 tables 1 called departments, with the fields: Dep No, Dep Name, then i have another table called Items, with the fields: Item No. Item Name, Item Price, Department.
What i want to do is create say 10 command buttons and create an array of them i know sort of how to do it in visual basic and all the 10 command buttons name is the same and an aray is created but i dont know how to do it in access i know that it doesnt let you create an array but i have seen it done somehow in a project that i came across.
so basically what i would want to have done is on the form load the 10 department buttons captions are loaded from the table departments and when a department button is clicked its is linked to items where i ahve created say 20 command buttons called items.
I dont know it it makes sense what i have written but any help on this matter would be very apreciated it pr if anyone knows of any examples as i have been stuck on it a while
Many Thanks
Hey all, I'm in a pickle and hopefully you guys could help me out. My users are old and scared. They require things made in a familiar fashion which slows people in the know, but it's what makes them work well.My most recent request from them requires me to make a "Submit" button for one of the forms that way they "know" the data is in the table. However, I know of no way to hold data cached until a button is pressed.Is there a way to do such a thing? Cache data until a button is pressed? To the best of my very limited knowledge, data entry takes effect immediately.
View 4 Replies View RelatedI have a form which is used in the Data Entry mode. I have a button on it called SUBMIT which closes the form. Of course in actual fact, as soon as data is entered on the form, it goes into the relevant tables, even if the form is closed without using the SUBMIT button.
I want the SUBMIT button to actually work like a submit button, so that no data entered in the form is actually entered into the underlying queries or tables UNLESS the SUBMIT button is clicked. Is it possible to do this?
Alternatively, if there could be a MACRO or something so that if the form is closed in any other way, the data just entered is deleted.
Any help appreciated.
Thanks!
I have been creating an inventory control system for my small business. I am looking for a code that will generate to another form. So for example if I take out 4 aprons from the first row by hitting the '-1' button 4 times leaving 46 in total how do I generate the information from one form to another by hitting that submit button.
My other form shows Product ID, Date Taken, Product Description, Employee who has taken it, Amount Taken, and Total left in inventory. I need the correct information to show accordingly in the Inventory control form.
I am attaching screen shots ....
I have this database with the purpose to storage all the tasks that are done in my team. I have a table named Tasks with all their fields. Now, I would like to set a more user friendly way for clients to update this table. I have created another table with a list of most common tasks, so when a client wants to add their tasks list they can choose one of this tasks and add it to the list. I had created a form with multiple items that contains the common tasks and next to each task a button that adds the information they choose into the table "Tasks". This works just fine. However, I would like to add a single button at the top to add all the tasks instead of having to choose one after one.
The "Add All tasks" button has this code:
Private Sub Command79_Click()
Dim valSelect As Variant, MyDB As DAO.Database, MyRS As DAO.Recordset
Set MyDB = CurrentDb()
Set MyRS = MyDB.OpenRecordset("Tasks", dbOpenDynaset)
[Code] ....
Hello everyone!
Before i forget: Sorry about my three identical posts before :-(
Here is the thing:
I've attached a picture of one of my forms (on a very early stage). I want to save the inputs into a table1 containing all the coworkers. I want to write the value 'X' into the column selected in the drop-down menu. But only at the coworkers whose numbers are entered into the textboxes 1-6.
How is that done???
// JR
I have a form (called User_Input)with 2 text boxes, 5 combo boxes and a Submit button, which is bound to a table (called Submssion table) i.e the form submits its entries into the table called Submission.
I want the submit button on the form to work based on this condition:
1. Check current submission of four fields (corresponding to entries from 4 out of the 5 combo boxes on the form) in the table and confirm if the current selection on the form already occurs in the table up to two times. If this is the case, the Message Box should pop up on the form informing user to make another selection as maximum number of entries for that particular selection is already in the Submission table.
2. The checks for the four fields will be done simultaneously as the selection will be done together on the same form.
3. However, if the entries on the Submission table is not up to 2, the entries should be saved to the table and Messagebox should display "Thank you for your Submission"
I need to use Macros for this being a web database which will be published using Sharepoint and VB is incompatible with the web database.
I have a table TO-det and another table DO-DET.The table DO-det will have details about all DO for each TOID record.Both have a common field name TOID The tables are related under ONE-MANY relationship.One TO-DET record can have many DO-DET record
Now I wanted to create a form where if i add a new record to TOID i must also be able to add data for DO-DET for that corresponding TOID.
Hi,
I have not used Access for over 10 years! I am using Access 2000 to look at tracking cow weight over time!
There are 2 tables:
- main table
- weight table
I want to set the main table's January weight to a value from the Animal weight table (logical expression):
UPDATE [main table]
SET [main table].Jan07 = [Animal weight].[Kg]
WHERE [main table].[Line no])=[Animal Weight].[Line no] AND
[Animal weight].[weigh date]= 10/01/2007;
I have tried several times to get this working, but it tends to prompt for the weight to be given as an input.
Any ideas?
many thanks
Lactaman
Hi I wonder if someone could help as I'm relatively new to this. I have tried to search for my answer but I'm not finding stuff that answers my need.
I have 1 table with products (tblProds) and 1 with stocklevels (tblprod_Stocklev). the PLU field is in both tables
tblProds tblprod_stocklev
PLU PLU
Descritption StockLevel_1
CategoryMaster StockLevel_2
CategoryGroup StockLevel_3
Category StockLevel_4 etc....
My query filters using 3 combo boxes using the category fields and the Option group sets its value to the corresponding number in the stocklevel table from a form (1 for stocklevel_1 etc). I have the category filter working as I need (ie selecting all records if left blank)
So to the question: How do I get my query to retrieve only the stocklevels for the required branch? :confused:
Any help/advice is much appreciated :)
I've inherited a data base which has the address details of our members spread across multi fields i.e. Add 1, Add2, Add 3, Post town, Post code etc.
Not all the fields contain information which means when I do a mail merge for address labels there are blank lines.
I would like to either be able to create a single field in the table (like a memo field for example) which contains all the address detail, or create a mail merge without blank lines.
How do I submit a zipped mdb for help solving a problem? Is there a file size limitation?
John
I have a label that I use to display certain information that will not refresh for new, but existing, records. I have prepaired/reduced an zipped Access 2003 mdb file. Would it be possible to submit this file for review in order to locate the refresh problem? The size of the file is 598KB; what is the size limitations?
thanks,
John
Hi,
I have a form, that has some text fields and a couple calendars for the user to select the dates from.
What I would like to happen is, after the user enteres the data, and they hit submit. I want the form to go back to a new entry, but it's not quite doing this.
The data they type in dissapears after submit, but the calendars seem to hold whatever date they used. And when they try and enter another entry, they can't select the same date as before. They have to hit a different date first, before it allows them to re-enter the same day.
Anyone know why? Is there a way to make the form refresh, or reload after they hit submit? So it will allow them to enter something for the same day?
thanks
chris.
I have a simple data entry form...when the user enters in something and tabs to the next field, it automatically adds the data into that field. Is it possible to dissalow or turn this automatic update off? I ultimately want the user to complete the whole form, then click submit. At that point in time and only then will the data be updated into the table....(the submit button simply goes to a new record to add)
Or, same thing, when they tab down to the last field, and then tab to the first again (rolls over to new record)
thanks!
I know many are opposed to multi-valued fields, but in this case it works out nicely for my purposes.. I pick a couple things from a table to put into a field in a separate table via multi-value lookup, and when I hit ok, nothing happens. Literally. Tried the enter button, tried a mess of different keyboard mashing, and nothing. URL....
Row Source:
SELECT [Cage Codes].[CageCode], [Cage Codes].[Company], [Cage Codes].[Division] FROM [Cage Codes] ORDER BY [CageCode];
I am working on a form and I only want the information to be inserted into the database if the user clicks the button at the bottom. In other words, if the user is filling out the form and then closes the form, I do not want that record saved.
View 2 Replies View RelatedI'm trying to build an expression where the form can only be saved if the field supervisor approval is not null.
View 1 Replies View RelatedHi Folks,
I'm working on an order management database for a small company and have an order details form which I hoped to list each product of the order. As each customer has a different price per product I have a combo (based on a query) to choose the product and display the unit price (working fine) - the quantity and product ID are also input on the form and stored in the order details table (un-tested). My problem is on the first line of the order you choose the product and it and relevant details are shown, however, on line two, three etc when you choose the product - the other lines change to this too. How do I fix this???
Many Thanks in advance for help given!!
Mary
I am almost finished this project. :p There are just a few things left that I would like to do and I need some help.
1. Add an email notification when data on the form has been edited
2. Filter the form for only OPEN orders, status not equal to 6 or 7
3. When an order is closed (status field) I would like to default the "Date Closed" to today, but allow the user to edit the date if need be.
4. Once the status is closed and the date closed is entered, ask the user if they would like to create a followup order.
I have most of #4 done. I added code on the After Update event on the Status field to set the Date Closed to today and then disable the control, then ask if they would like to create the followup order. The users would like to be able to modify the date closed if they don't happen to do the entry until the next day. I have tried adding my code to the After Update of the date (which is updated with a pop up calendar), but once I select the date from the calendar, the focus stays on the date and the user is not prompted to create the followup order.
Any help you can offer would be wonderful
Thanks
Pat
I have extensive experience of other SQL databases but, in Access I don't know how to access the SQLCODE (as it would be in other DBMSs) to see if my query worked and if it did then how many rows were updated.
Anyone speak my language?
Hello!
I have a problem figuring out a solution for following problem.
I have a database of details and their properties.
All the details have been described in one table.
As there is a need to describe groups of details I have found myself in a hard situation that needs to be resolved.
The structure of described detail groups is as follows:
Product
Detail Group1
Detail groupx etc.
Detail4
Detail groupx etc.
Detail groupx etc.
Detail1
Detail2
Detail3
Detail Group2
Detailx
Detailx
Detail groupx etc.
Detail groupx etc.
Is there a way of decribing my products in access so that there are no limits of how many groups does a product have and how many levels of groups the product have.
Thank you
Hi All,
I am rather new to this and I must admit I am getting everything completely wrapped around my head!
I am developing a database that stores technical support requests received and their solutions. I have three main tables :
Problem - stores all the details of the problems received
Client - stores the address details of the client which is then associated with the 'Problem' table
Company - stores the name of the company which is then associated with the 'Client' table. This is a separate table as different clients can work for the same company.
At present, I have a 'problem data entry' form in which I enter all the details of the problem. At the top there is a section where I can do a search for a particular client and company and the details appear in the respective text boxs on the 'problem data entry' form. If the client does not exist, I have a button that I use to open another form which allows the entry of the new client's details ('New Client'). The user can choose which company this client works for by using a combobox. If the company is not already in the database, I have another button for opening a 'New Company' form!
Its all a little convoluted and it does not work particularly well to be honest. When I add a new company, I need to move forward a record and then back in the 'New Company' form in order that the new company information is saved correctly.
The company selection combobox in the form 'New Client' is then updated with the new company name BUT I need to actually open the combobox and select the company name myself for it to work properly! Once again I also need to move forward one record and then back again in order to properly save all the information before I can close the form.
What would be nice is to do a search for the the company in the combobox on the 'New Client' form, if the company is not found, it automatically adds the company to the database whilst updating all the necessary links. Hence getting rid of the 'New Company' form. I would also like to get rid of the problem of having to move forwards a record and then back again.
Any ideas? I find my method to be rather poor, there must be a simpler way of doing this!
Many Thanks,
Lee
Hello,
I have not used access that much, but what I am looking to do is basically have 2 details sections within a report that will have different records in them.
I first used a subreport but that really did not work as intended. It left large gaps in between the records and just plain didnt work.
Here is a image of what I am trying to achieve:
hxxp://img379.imageshack.us/img379/9471/accesshelpnx9.gif
As you can see theres two different sections. One is for regular campaigns and one is for extended campains. There is a field in the table that has the extended date. For the compaigns that field should be blank or null and for the extended campaigns it is not blank or null.
Is there anyway to achieve this in Access 2003, if so can you tell me or describe me the steps?
Thank you!