In my table i have three columns for data entry. They are Subject 1, Subject 2, Subject 3. I need to be able to produce and query that will bring results up if for example 'english' is in anyone of these columns. I know how to do it for just one but i need it to be able to check all three columns?
I have a table of data (codes & amounts) which I want to display on a form via a list box (purely for information purposes; the list box will be locked / disabled). Basically, the list box will mimic a pivot table as it would appear in Excel, albeit without any of the filtering functionality.Codes can appear multiple times in the source table, each with a different value assigned to it.
The list box should have 3 columns :the unique code strings the number of instances of that code string (i.e. Count) the total value assigned to that code string (i.e. Sum) In descending order based on the number of instances of each code
I have the following query set up to pull the data :
Quote:
SELECT tblData.Code AS Expr1, Count(*) AS CodeCount, Sum(tmp.Amount) AS CodeSum FROM (SELECT Code, Amount FROM tblData) AS tmp GROUP BY tblData.Code ORDER BY Count(*) DESC;
I want the 3rd column of the listbox (the summed value) to appear as a formatted $ amount rather than a raw floating point. So "$10,000" rather than "10000.00". And, if at all possible, right aligned.But I have no way of formatting the columns of the list box (that I am aware of) either through the listbox properties directly or by VBA indirectly.Is there another way I can do this, either by applying the formatting to the query itself or any other trick to somehow apply the formatting as I need it?
I have been trying to figure this out for a long time. Any tips/helps is much appreciated it.
I have a table with 3 columns(SSN,DeductionType,DeductionAmount). Let say I have 100 employees. There are 3 records per employee, because each have 3 different deductionType(TypeA,TypeB,TypeC).
I want to create a queryTable that will result with 1 record per individual, with TypeA,TypeB,and TypeC as column names and the DeductionAmount as their values. Make sense? Below is an example of what the new table should look like:
I have created a list that has 5 column. Data is filled in list using a query. I know how to remove 2 columns, but I do not know how to increase the width of columns.
I am trying to concatenate values from seperate columns. Which is fine, however if there are no values in any of these columns I wish to include a dot (.). I also need to add a dot (.) inbetween values.
What is the correct way to save the values in a listbox column to the fields of a table? I can use rec("field1") = Me.list16.ItemData(Varitem)and that records the bound column to field 1 but how can I save the unbound columns to other fields in the table?
I want to make the default value of my column "TimeonOW" to be the difference in months(past 12) from the entered date in "OWStartDate" and the current system date.
Hi, I am trying to compare two columns' values within the same QUERY table, but I kept on getting the "Data type mismatch in criteria expression" error. What am I doing wrong?
Here is my Select Query Statement: SELECT qryDedparmDedetail.EMP_ID, qryDedparmDedetail.[Employer Amt], qryDedparmDedetail.[Employer Actl], qryDedparmDedetail.[Admin Amt], qryDedparmDedetail.[Admin Actl], qryDedparmDedetail.[Employee Actl], qryDedparmDedetail.[Employee Amt], qryDedparmDedetail.FirstOfSTATUS, qryDedparmDedetail.FirstOfAGENCY, qryDedparmDedetail.FirstOfTITLE, qryDedparmDedetail.FirstOfFORMAT_NM, qryDedparmDedetail.RepUnit, qryDedparmDedetail.FirstOfDEDTYPE_CD1 AS Expr1, qryDedparmDedetail.SumOfNBR, RepUnit.REPUNITDESC, qryDedparmDedetail.LeftType FROM qryDedparmDedetail LEFT JOIN RepUnit ON qryDedparmDedetail.RepUnit = RepUnit.REPUNIT WHERE (((qryDedparmDedetail.[Employer Amt])<>"Employer Actl") AND ((qryDedparmDedetail.LeftType)="01"));
I have a column that's called "Date" which stores values for begining to end date as 'Text' like: 070314-073114 So I need to split it to 2 columns that has the Start Date as 070314 and End Date as 073114?
This database is still in Microsoft Access, and eventually after cleaning it up, we will move it to SQL Server.
I'm new to Access programming. I want to setup an Archiving/Storage Database which contains data of boxes with folders in it. The data would be the box number, begining folder, ending folder and box description (See Below).
[BoxNum] [FromRange] [ToRange] [BoxInfo] 123456 10000 10100 Case File 123457 10101 10954 Batch File 123458 11234 11545 Case File
I would like to setup a database that once the data is entered a user can open a form and search for a folder like 10054 by entering it in to a field like [SearchBox] and search the values between [FromRange] and [ToRange] and retrieve that boxes information 123456.
I need to create a query that combines two columns (lets say Column A and Column B for example) however the problem is that whatever non-null values that are in Column B must replace any value in Column A. If Column B has a value that is null then Column A's value is shown.
I have an example of what I'm working with (access file) and what result I want (excel file).
I have a form for student attendance that is bound to a query and stores a temporary value for ClassesAttended in a StudentEnrollment table as faculty enters the attendance. They then run an append query to write the temporary records to a StudentAttendance table. Because the ClassesAttended field is bound, when the form is opened, it recalls the last number entered for that student in that class as entered by the faculty the last time attendance was updated. I tried leaving the field unbound, but the first value enter into the first record of the form is updated automatically to all subsequent records.
Is there a way to change the properities, use code, etc. to assigne a null or 0 to the ClassesAttended field when the form opens, without the first updated record to propagate through the reaming records?
Runtime Error 3075? I have attached a copy of my database. I am trying to make a calendar form with the list boxes having two columns. It works fine with the strFieldID and strFieldName but when I try adding the strDone I run into the error.
I have a columns that do not incur a count value within the time period of my query, yet i still want them to be displayed with a 0 or no value in the query view, how do i do this?
I have an unbound combo box with three columns, which get the values from a query. The first column is hidden. When I close the combo box after my selection, only the second column value is shown on the box. Is there any way that both the second and third column being shown on the box after selection?
I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code: TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID] SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID] FROM Register GROUP BY Register.National PIVOT Register.P_Gender;
I'm trying to make a database to track inventory or several items. Basically, I have four tables:
1) RawMaterialList - includes a list of all raw materials. 2) PartList - includes a list of all finished product using said raw materials. 3) RawMaterialRecieving - contains details from each packing slip of incoming raw materials. 4) ShipmentRecord - contains details of daily shipments.
Each of these tables is fed by a form of the same name. I should note at this point that I basically taught myself how to use Access and I imagine I'm in the dark about quite a few things it can do. I've made several databases over the last few years, but I'm stumped at this point.
Here's my problem. In the form RawMaterialReceiving, I have several fields aside from basic information:
1) Item - a list of of raw materials from table RawMaterialList 2) Description - also dependent on info entered into table RawMaterialList 3) Quantity
My problem is I want to add up the quantities of each raw material and I'm not sure how to go about that. Lets say on May 13, I received 15pcs of Part A and 20pcs of Part B. I enter this information as Item1 and Item2 respectively. On May 14, I received 30pcs of Part B. I enter this information under Item1. Now I want to add up all of Part B (50 pcs). But Part B has one value listed in the field Quantity1 and one value listed in the field Quantity2.
The columns are PayPeriod, StartDate, EndDate, FiscalYear
What I want to be able to do is highlight a chunk of dates and have the first selected StartDate and the last selected EndDate populate two hidden text boxes so I can use them for my queries/reports.
I've tried a couple different ways. Each time what happens is it only uses the last item I have selected in it's calculations.
Code: Dim ItemIndex As Variant For Each ItemIndex In Me.lstPayPeriods.ItemsSelected If Me.lstPayPeriods.Selected(ItemIndex) And Me.lstPayPeriods.Selected(ItemIndex - 1) = False Then Date1.SetFocus Date1.Text = Me.lstPayPeriods.Column(2, Me.lstPayPeriods.ListIndex) End If Next
In this example I tried to have it go through each Item of the listbox. I wanted to check to see if the current row was selected and the row before it wasn't. That way I could determine it was the first item selected in the group of selected items. It would always only use the last item I had selected.
Code: Dim CurrentRow As Integer Dim FirstDate As Date For CurrentRow = 0 To Me.lstPayPeriods.ListCount - 1 If Me.lstPayPeriods.Selected(CurrentRow) Then Date2.SetFocus
[Code] ....
I tried to do something similar with this code. Again, it only uses the last item I have selected.
I am trying to obtain totals from two columns in the list box into text boxes on the main form, but my third argument is not working as expected.The source of one of the tex boxes is:
Access 2010 - I would like to use DLookup to show results values from a table and display in a unbound textbox on a form. the results from each column in the table need to be on seperate lines, a break if you may. Here is the code I have so far.
I m new to access, i want to get the Project_name into "form!project_name " from the project table when user select project_id in the form. Any idea will be appreciated.