I have a table listing xxx reasons for dispute - Users will check boxes. How do I build my query that would list all the entry numbers which have a text box?
Might sound stupid but what would be the criteria? Think it would be easier to get these results into a report and sum.
I'm baffled!19142:confused:
I made a form for users to go back and see saved records as and when required. However my cascading combo box are not showing the saved information. Information is saved in back end.
View 5 Replies View RelatedHi,
I was wondering how to delete records that have been checked (through a checkbox) in a form...
Also, I want to add a record after the record that has been checked. I only want this ability to add records available if only one record is checked. Otherwise, if more than one record is checked, the "Add Record" button would be disabled.
Any help would be much appreciated.
TIA.
Hello Folks.
I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.
Hello Folks.
I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.
Dear All:
I posted this question before but I did not include the right information. (Many thanks, Mwalts)
I have created a form with checkboxes. I wish to export data to excel on only the people that are checked.
To export is not the issue. I have created a query to list only the people that are checked. The control souce of the checkbox is called graduated. When I go into the datasheet view, the people who are checked are represented with a -1.
In regards to the design view of the query, what text or value do I place in the critera field to list only the people that are checked?
Any help is greatly apprciated.
Regards,
Dion
I have set up a database to record several different sets of records for a volunteer group that I run. The types of records that I am keeping are hours on duty, uniform issued and attendance at training. The attendance form is a subform which contains a list of dates and the two fields of checkboxes showing if they attended or sent their aplogises.
What I am trying to do is to count the number of times that members attended training. I have set up a 'unbounded' text box in the footer and would just like to add a formula in to the command box of the box properties. Anything more i.e. coding then it goes over my head very quickly.
Hi, I hope someone can help me. I have a database as thus:
Several tables ->appended together using 'union select' into a query called 'sheet1'-> information that is coded converted via linked tables in a query called 'sheet2'
'Sheet 2' looks completely fine - it works dandy but when I try and run a pivot table not all of the values in one column that should show don't even come up as an option.
The values that are missing on the pivot report do actually exist in the query that it is running from.
There are no filters on and Pivot tables work okay on the origional tables.
Has anyone had anything similar?
Help would be most appreciated,
Thanks,
Erica
My form, which is linked to my employee's table wont show all the records.
I know this is a basic thing. I've checked that it's not set to data entry in properties. I don't know what else to do.
the record source maybe? However, It was a tabbed form (cause it contains quite a lot of data capture fields).
this problem has occurred ever since I split my database.
When I add new records to the form and close the form, the tables are updated with the new records, but the new records don't show in the form (navigation).
View 14 Replies View RelatedHello. This is a very basic question. I have a query that has relationships set within. Now.. When I pull up the query with a criteria such as "date" ... the query pulls up all the information for only the items that have all the related fields filled in. How would i make this query show ALL the items from that "date" even if their related fields are blank or there are no relationships in another table?
Please let me know.
OvAdoggvO
Hi All
I have a feeling that this is an absolute newbie question.
I have three queries, qryVisitsDue, qryVisitsOverDue, qrySiteView.
The query qrySiteView uses SiteID to produce a listing of all sites which includes a count of visits for those sites. If there is no visit data the site does not display. To display the counts I'm using the other two queries. In the first two I'm querying a table, tblVisits, to find what visits are due or overdue based on the current date. They work fine where there is visit data. My problems start when there is no data for a site. I need to be able to show the sites where there is no visit data.
I'm not very experienced so basic explanations are probably the best.
Any help much appreciated.
ChrisD
I have two tables, bad design, not my choice of the way it's set up.
Table a has Fields 1-2, dups allowed in all fields. No pk was originally assigned.
Table b also has the same fields 1-6, but also has field 6.
Table a has all of the records in question, table b only has some of the records from table a but does not have any records that are not in a.
Something like this.
Table a
Field1 Field 2 Field 3 Field 4 Field 5
John Shirt blue denim button
Mark pants green straight
John Shirt blue silk button
Table b
Field1 Field 2 Field 3 Field 4 Field 5 Field6
John Shirt blue denim button new
Mark pants green straight used
If I query the two tables, a left join to b, then I get the correct number of total records. If I select any records from b, then the total records goes higher than there are, even for the two combined, listing the same record multiple time.
Any suggestions are appreciated. I am a blood bank lab person, not an IT person, or DBA, so simple responses are greatly appreciated.
I have a work order system that people use but it somewhat randomly puts blank records into my table. I've added a lot of validation checks when submitting, closing and resetting the form and limited the way people can exit out of the form to fight this issue but it still happens.
View 3 Replies View RelatedIs there a way, aside from using auto number, to find a records postion. I am using a list and want to be able to double click an entry and have it open a form and go to that record. However I can't use auto number because I allow for the deleting of records, and once deleted the auto number no longer corrilates to the records position.
If anyone knows of a different sytem that renumbers after deleting a record that would be great if you could share it with me. Or if there is a way to open a form and use goto record but instead of using record postion use where statement.
If anyone has any other ideas on this please share. Thanks.
I've got 2 tables, same structure, one [T-temp-Target] holds number of training units split by module a trainee needs to finish the course, the other [T-temp-Actual] holds what they've completed so far.
Both tables have structure
TRAINEEID
MODCODE
CountOfUnits
I'm trying to find the modules that they've not done yet so I can add up the units for them, only modules that have been started are recorded in the table of what they've done [T-temp-Actual], modules they haven't started yet aren't included in it. Here's the SQL
Code:
SELECT
[T-temp-Target].TRAINEEID,
[T-temp-Target].MODCODE,
[T-temp-Actual].MODCODE
FROM [T-temp-Actual] INNER JOIN [T-temp-Target] ON
([T-temp-Actual].TRAINEEID = [T-temp-Target].TRAINEEID) AND
([T-temp-Actual].MODCODE = [T-temp-Target].MODCODE)
WHERE ((([T-temp-Actual].MODCODE) Is Null));
I have a database for work where I have a table of meters and a table of Faults which has a list of all faulty meters at one time. When a fault is repaired, I have a macro which updates the Meter Status to Working, adds a Fault Closed date, appends the record to the Closed table and then deletes it from the Faults table.
The user runs this from a form by clicking the Closed Fault button which activates the macro. I've added Echo on and off to hide that the form is temporarily closed while the Append and Delete queries are run and then it is re-opened again.
My problem is that the Form always opens at the first record in the Faults table. I would like it to open to the record which would have been next after the one that has been moved to the Closed Faults table.
Below is the code I have been using to test the Copying Meter Reference, closing and opening of the form and finding the correct record:-
Function CopyTest()
On Error GoTo CopyTest_Err
Dim strMeterRef As String
DoCmd.SetWarnings False
DoCmd.GoToRecord , "", acNext
strMeterRef = Meter_Reference
[code]....
As you can see I am trying to go to the next record, copy the Meter_Reference by setting it to strMeterRef and then Find strMeterRef when the Faults form is re-opened.
I have a Macro embedded in a button which calls the above Function by using RunCode but nothing happens.
I have created a form for a table which contains ~600 movies and their name, genre, rating, director, year it was made, and length (min).I need to be able to enter numbers into the two Year boxes, and then it filters the movies in my database and only shows me records from between those two years. The years in my database are just in one column in the format of: XXXX e.g. 1996 etc..I've tried the code:
Code:
Private Sub Year2_AfterUpdate()
Me.Filter = "[Year] BETWEEN" & Me.Year1 & "AND" & Me.Year2
Me.Filteron = True
Debug.Print "[Year] BETWEEN" & Me.Year1 & "AND" & Me.Year2
End Sub
Year1 and Year2 are the boxes Year: and To: respectively. [Year] just being the column name which contains all my years.When I try to run my query it shows me my records, but it shows me all of them! It doesn't filter it at all!
I have attached part of my database.
I need to show the complete rows for all the status in each year with or without any record/data.
I want query to find duplicate records, i have two field in one table
Cusip and category
cusip and category are many or duplicates
but in one cusip category should be the same if not then provide the cusip which has different category used
like this
CusipCategory
123R
456P
123R
456P
678Q
678Q
123A
result should be
CusipCategory
123R
123R
123A
I have a table where csv files get imported to on a daily basis. The key fields I am working with are a supply number and date. The problem I have is that sometimes the csv file will contain information that is correcting/updating information held in the table. This is creating duplicated records.I need to either create a query to find records that have the same supply number and date or find a way of overwriting the records in the table with the new data.
View 2 Replies View RelatedI am trying to create a report which basically includes the following:
Company, Wages, Contribution.
Each company reports wages for each employee every month. Then they also contribute to a general fund based on a percentage of the wages. For instance:
Company---Employee---Wages---Contribution
CompanyA---EmployeeA---$4000---$40
CompanyA---EmployeeB---$3800---$38
CompanyA---EmployeeC---$3800---$38
CompanyB---EmployeeA---$4200---$42
CompanyB---EmployeeB---$4200---$42
...and so on.
Each employee is required to contribute, in this example, 1% of gross wages to the general fund.
On occasion, the company does not pay in the required 1% of gross, say, for CompanyA EmployeeA, they only paid in $35.
Here is what I need to do. If any contribution amount for any employee is incorrect, I want to display all the records for that company, not just the incorrect ones. The report is grouped by Company, and may contain dozens of companies.
I am already passing a number of criteria to the report using a filter, including the date range and other fields which are informational.
I'm trying to write record set contents to excel. My query runs perfect in access query wizard, but recordset showing as null. My VBA code
Code:
Dim cnn As ADODB.Connection
Dim recordst As ADODB.Recordset
Dim strSQL As String
Dim strPath As String
Dim appXL As Excel.Application
Dim wb As Excel.Workbook
[Code] ....
I am designing a database for my organisation. I have done most of it but am stuck on this. Ideally I would like to have a check box (in a table) that when checked a load of data is carried across from that record to a record in another table.
Given that I can't and don;t want to use VB is there anyway that this can be done easily?
Hi.
i.e..............
Table A has records 1,2,3,4,5,6,7,8,9,10
Table B has records 1,2,3,4,5,6
How do I create a query that returns values 7,8,9,10 for Table B when I compare Table A and Table B?
What sort of query do I need? I tried the "Unmatched query" but this did not get the result I wanted.
Thanks for reading.....
Frank.
I have a table 45 fields. There is a field ID. I would like to get the records where fields contains "No". I would not like to create 45 queries for each field check. how can i generate a table which shows ID, Field Name that contains value "No".
View 4 Replies View Related