hi all, :D
i am new in this forumn i have one access db in which i have one table all Customer having info of no of customer i want to design one form in access which access the record from table customer and also i am able to edit and update the reocrds in form i want to navigate the records as fristrecords,next record,prevoius record, and last record how can i do this pls help me regarding this...
thanx,
Regards,
Nilesh thakur
Hey guys.This is a real basic question but I am a newbie at this.:confused:I have created a form in Access that is actually an INVOICE for my company and therefore I have fields like [qty1],[rate1] & [amount1] In the form in [amount1] I have used the following expression to get automatically generated values.=[qty1]*[rate1]This gives me the Amount. But problem is that the result that is automatically generated by this mathematical operation is not stored in my database under the field amount1 and the field is therefore blank. I wish to use this resulted value in a report and also want to use it in other forms e.g. my sales register.kindly help me out with this.:)
View 1 Replies View RelatedHi, I wonder if any one could help me with what I think is a simple query.
I would just like to show all the orders thats have been made within the last 7 days.
So far I can retrieve all the orders made today, by using 'Date()' as my criteria, but cant figure out what criteria to use for the last 7 days. It would also be good, if i could figure out how to retrive all orders made within the last month, and as well select all orders made between two specific dates.
Regards
Hi,
I am in need of help to sort out some records. I have tow existing queries I would like to combine and get one final set of records out of. They go like this:
Query 1. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 x x (check
Y ACD 2 x x boxes)
Query 2. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 8/8/05 9/8/05 10/8/05 (query
Y ACD 2 8/8/05 9/8/05 10/8/05 performs calculations)
What I am looking to retrive through the third query is this:
Query 3. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 8/8/05 9/8/05
Y ACD 2 8/8/05 10/8/05
Where the third query only shows the calculated dates when the check box is true. So for month 1 & 2 I get dates for Lot X and for Lot Y I get dates for month 1 & 3. I have tried to go through the expression builder, but to no avail. I either get all records, like query 2 or I get nothing reported. I am not sure how to limit the records based on the check boxes.
Thanks,
CB
If my make queries in the data base and the source data base is another .mdb and the table names in the other .mdb which would be used for the queries are the same as those in the data base where the queries would be made......does anyone see any problems with that in the area of corruption or similar.
The queries made would be indentical to their counterparts in the data base where they are made and would serve the same purpose.
It would be a toggle type of thing whereby the recordsources for the forms in question would be changed.
For what I want to do it works perfectly but I am not sure if there would be problems that would only surface with longer term use and varied conditions as opposed to some short term testing.
I have data from a survey with qualitative responses. For a single qualitative question, I moved the ID & responses into a new table and categorized the response according to a bucket/theme, where each column is a new bucket. I now have 10 columns. Each response is represented in 1 or more columns. I used an excel formula to copy the response data into the column itself.
Example:
A1 // B1// C1 // D1// E1//... L1
ID // Response // Cats // Dogs // Elephants //.... Column 10
1 // I like cats // I like cats //(null)//(null)// ... (null)//
2 // I like cats and dogs // I like cats and dogs // I like cats and dogs //(null)//..//
3 // etc.
However, now I'm realizing that Access always wants to show data for all records, or at most I can limit using a WHERE clause in my query.I want to use Access to generate this report:
1. Section 1: Show all responses from the Cats bucket where there is data
2. Section 2: Show all responses from the Dogs bucket where there is data
3. and so on
I know how to do summary values, and I know how to do filtering that apply across the whole report, but this seems like more advanced filtering, where I want to see selective details differently for each field.
First I would like to give thanks to all the knowledgeable folks here who have helped me with my DB to date. It is working and every one is very happy and I have learned a lot.
So now I would like to add some more functionality to this existing project.
My DB is for data input of customers for a drawing. It has the following fields: Id, account number, first name, last name, date/time, score1, score2.
I t is taking a great deal of time for the users to enter in hundreds of entries a day. Most of the entries are customers who are already in the DB. I would like to get the fields to auto fill the data for existing customers say after the account number is entered. So after you put in the account the name and any other pertinent data would shows up saving users from typing it in again.
The first problem I am having is that this is still a data entry form and I can’t figure out how to be able to see the account information and still add new data to the record? The new data is a daily score they get.
Second I haven’t figured out how to call up the customers information from just the account field.
I’ve googled this and haven’t found anything terribly helpful.
i would like in a form for a combo box to be able to select an item from a table and input relating information automatically into other boxes in the form..
I have 3 tables: Table 1 has product code and product description.
Table 2 has invoice number company details, address etc.
Table 3 has product code and product description qty and invoice number..
Table 3 relates to table 2 by the invoice number and table 3 product code looks up the product codes available in table 1 and also table 3 looks up the list of products descriptions in table 1 using the combo wizard.
This means the wrong code can be put with wrong description.
What i would like to know is how i select a product description and the product code in the form fills out automatically?? i hope this makes sense please helppppp!!
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
I want to use the same form in datasheet mode for data entry and retrieval. When retrieving, all controls are disabled and locked. I am trying to enable and unlock them for modifying but that isn't working.
<code>
DoCmd.OpenForm "PO_Practice Data", , , , acFormEdit, acHidden
Forms![PO_Practice Data]!PO_Name.Enabled = True
Forms![PO_Practice Data]!PO_Name.Locked = False
Forms![PO_Practice Data]!Practice_Name.Enabled = True
Forms![PO_Practice Data]!Practice_Name.Locked = False
[code]...
I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected
Total Envelopes=sum(Envelopes) for date selected
Total Documents=sum(Cases) for date selected
Total Pages=sum(Pages) for date selected
I want a Text Box Query on my form to display the Status, Workshop, Time, Enrolled and Limit. The problem is these values come from two different tables and the Enrolled value comes from a single field that contains the different workshops.
What I mean is: In Table[Attendees] a row contains a customer's Number, First Name, Last Name, Workshop and Phone Number. The workshops vary for each customer so one row on the table could have John Doe attending Cover Letter Writing and the next row could have John Smith attending Resume Writing. What I want is to be able to count the different workshops within the Field[Workshop] and total them and then display the total in a Text Box Query. I have a Text Box Query set up displaying Status, Workshop, Time and Limit as these values all come from Table[Workshops].
So basically I need to Query to also display a result that is the Total for each workshop from Table[Attendees] and display the total for each workshop in a Query with data from Table[Workshops].
Here is a link to an Example Database [URL] ....
I'm trying to avoid putting things on different reports and the like because the people using this are basically computer illiterate and if they have to click a button (no matter how well labeled) they won't do it and the information might as well not exist.
And if there's a better way to do it, I'm all ears. The only thing is, I have to update these workshops month by month. Since they are dynamic, I want to avoid creating separate tables for each workshop.
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
View 14 Replies View Relatedwhat I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes
View 9 Replies View RelatedI am trying to save specific data from a data entry form to a specific depending on what the user selects from a dropdown/combo box.
So if the user selects "test company from the combo box, that data (from that form) will save to the Test company data table.
I have a database that I import data from an excel spreadsheet into multiple times daily. The table that this data is imported into has several key fields that if the data already exisits in the table, and I attempt to import data that is the same except for one or more of the key fields is different. At this time the database it creates a different record. I am trying to get the database to overwrite the data in the database.
View 1 Replies View RelatedMy aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
My question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:
ID WorkerNumberDateworkedTimeStartTimeEnded
121/2/201310:00:00 AM3:00:00 PM
221/3/20132:00:00 AM11:00:00 AM
321/4/201312:15:00 AM11:30:00 AM
421/5/201310:25:00 PM11:00:00 AM
531/2/201311:00:00 AM3:30:00 PM
631/3/201312:00:00 PM10:00:00 PM
731/10/20137:00:00 AM4:00:00 PM
I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.
Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).
Background I have a query (Q1) that retrives data from a table (Table 1). One of the fields in Table (F1) contains both text and numeric data (ie: 24 eggs). I want to separate these values in Q1.
Questions
How can i in Q1 retrive only numeric data from F1 and display that data i a field?
How can i in Q1 retrive only text from F1 and display that data i a field?
thos is f.i. a json data sting :
{"vip_kaarten":"0","reg_kaarten":"0","extra_vip_ka arten":"0","bedrag_extra_vip_kaarten":"0.00","extr a_reg_kaarten":"0","bedrag_extra_reg_kaarten":"0.0 0","vrjr_kaarten":"2","extra_vrjr_kaarten":"0","be drag_extra_vrjr_kaarten":"0.00","website_link_spon sorpagina":"1","website_banner":"","social_extra_m ededelingen":""}
How can i convert this to readle data?First string is the field name, second the value.
I am trying to use SQL to run queries in our access database in order to (hopefully) speed things up. I'm trying to create code that basically takes data from one table and inserts it into another whilst doing calculations on the data.
However I can't get past this:
Code:
Private Sub Test_Click()
Dim strSQL As String
strSQL = "CREATE TABLE [TempRedAmberGreen]" & _
"AS (SELECT " & _
"[ID_CHK] String," & _
"[Red] String," & _
"[Amber] String," & _
"[Green] String)" & _
"FROM [035 - Meter Point HH Data];"
DoCmd.RunSQL strSQL
End Sub
It keeps saying "Run-time error '3292': Syntax error in field definition.
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
I have a field in a table that is comprised of mostly numerical data but some records are text.
I want to convert this field to numerical only and make a new field to put the textual data in.
However converting the field will delete the textual data. What is the easiest way to convert the field but save the textual data AND append the textual data to the SAME record that they were in originally in the new field?
I have a table and a simple query that pulls results from the table. Nothing too crazy. But, if I were to go in and change some of the data/values in the query results it will change the respective data in the table. I know that this cannot be right. What do I have to do to either prevent the ability to change query results and/or prevent any changes in the query from altering the original data in the table.
View 2 Replies View RelatedI was assigned by my manager to design an Access database system that is able to import all data from excel file monthly and creating charts & tables to analysis how each sales people and industry perform.
We originally have a big excel master sheet that has more than 10 sheets. I tried to import the current excel into access, but then i realized that this is not gonna work. because for next month, there will be new data and I can't do the whole import process over and over. Plus, after this system is designed, the users will be someone who has no knowledge in access, so i need to create a user-friendly system for them to use.
My questions is:since the data is always cumulative number, if I imported current excel file into access, when the next month comes, how to update the new data into excel. p.s. EXP. Mike's sale volume is different each month, and with the access system, for that column, it will be a cumulative number, like the total from the month of November to this month. how do i achieve this kind of update/import goal?I tried to link the excel to access, but by doing that, I will not be able to set relationship or change the attributes of any data type in access.