I am pulling in source data and inputting it as a table in access. However, I would like to stop constantly adding in the column on excel and then importing the data into access.
Is there a way to use a Query to add a status column or another method on Access?
I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....
I have 3 queries named Mech Final Equipment 3 Mth, Mech Final Equipment 6 Mth, and Mech Historical Final Equipment.They all have two fields-Final equipment and Sum of Sum of Down (calculating the number of minutes each piece of equipment was down in the time period selected).
My ultimate goal is to join the three queries to display a pivot chart that uses the Final Equipment as the category field and 3 Mth, 6Mth, and Historical as seperate data fields.What I have is a join query (Which I have named Mech Final Equipment H63 Joined)
Using this SQL:
Code:
SELECT DISTINCTROW [Mech Final Equipment 3 Mth].[Final Equipment], Sum([Mech Final Equipment 3 Mth].[Sum Of Down]) AS Duration
FROM [Mech Final Equipment 3 Mth]
GROUP BY [Mech Final Equipment 3 Mth].[Final Equipment]
UNION
[code]...
Which returns a table that looks like this:
Final Equipment, Duration
Ancillary Equipment, 225
Ancillary Equipment, 401
Ancillary Equipment, 1787
Brush Unit , 1252
Brush Unit , 2519
Brush Unit , 8004
And so on.What I need the table to look like is this
Final Equipment, 3 Mth, 6 Mth, Historical
Ancillary Equipment, 225, 401, 1787
Brush Unit, 1252, 2519, 8004
And so on, like a cross tab.I tried to do a crosstab query but I don't have enough fields.
I am trying to add calculations to queries based on columns in the query... it seems to randomly expect 'Expression' or 'Group by' as column types, and Im having to create 3 sets of queries following on from each other to de-dupe data and allow filters on calculated values.
Also I've got a function which turns a date into a quarterly cohort, e.g. Oct 2013 -> 20134. I use ot on a lot of dates. I created a VBA function, CohortQ used as follows in queries:
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 CohortQ([InputDate]))
In the VBA, InputDate is defined as a date
Code:
Function CohortQ(InputDate As Date) As Integer
If InputDate = 0 Then
CohortQ = 0
Exit Function
End If
[Code] .....
But when I run it on a date field, it gives me a data mismatch error. I can't step through as it's working on 600K rows.
If I put the function into the query,
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 Year([InputDate])*10+DatePart("q",[InputDate]))
it works.
I was wondering how to do a crosstab query and have to column headings
I need the Organization Number and the Org name..so something like this
4005 4010
Office of HQ Office of Accounting
Is this possible?
I run a query with several columns. The first column in that query is full of individual names; about 50. I have another spreadsheet with three names. I used to be able to set a criteria or a filter (whatever you want to call it) in a query that when "Run" would only return to me the names from the spreadsheet with 3. Not a drop box or a pop up where I have to fill out the name, just a spreadsheet with all the transactions that occurred with these specific three individuals.
View 1 Replies View RelatedI have a table of Cabinets. Each cabinet has 20 fields for Hardware (HW1, HW2 etc)and 20 for Hardware Quantity (HW1Qty, HW2Qty etc). Not all fields are populated.
Hardware is entered as an ID number
eg "Hinge" = 620 and "Handle" = 750
So say there are 3 Cabinets in a Job Order
Cab1: [HW1] = 620, [HW1Qty] = 2
Cab2: [HW4] = 620, [HW4Qty] = 4
Cab3: [HW1] =750, [HW1Qty] = 2 AND [HW3]=750, [HW3Qty]=1
Each Job Order (list of cabs) is different.
I need to total all the different hardware items, no matter which column (HW1, HW2 etc) they might be in.
So I would end up with totals like :
620 (Hinges) = 7
750 (Handles) = 1
for each Job Order
I have a database that I just imported a table and I am trying to get the top 5 by desc order of my member count. The problem is some of the counts are duplicated as 1 but the other columns are not a duplicate. I am attaching an example of the Excel I am importing, but this is just an example. I have multiple product across all states and products and then there is WLP, AGP, MMP under Legacy.
Then I have the top 10 top1dx and the ranking is actually 1 to 10. The layout was pulled asking for the top10 diagnosis or dx1 and then give me all the dx2's that fall under that dx1. So I might have 100 dx2's but only need the top 5 but as I said with the count of 1 on many, if I do my query, it will give me the top 5 and chop off any 1's but then I don't get each ranking 1 through 10. I will post an example also of what I need for the output and just having a difficult time with the right query. Here is the query I used:
Code:
SELECT OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT
FROM OP
WHERE ((([OP].[TOPRANK]) In (SELECT TOP 5 TR.TOPRANK
FROM OP as TR
where OP.TOPRANK = TR.TOPRANK
ORDER BY TR.MEMBERCOUNT DESC)) AND (([IP].[MEMBERCOUNT])>1))
GROUP BY OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT
ORDER BY OP.MEMBERCOUNT DESC;
Even if the top 5 ends up showing only 3 in the mix, that is fine. As long as I have in the end every legacy, product, state, the dx1, dx2, toprank accounted for by memebecnt desc.
I have an append query. I want to get a column that is the sum of 3 other columns:
Oil_T_C_(bpd) Gas_T_C_(MMcfd) LNG_T_C_(Tonnes_per_Annum)
1000 2000 3000
I want to get a column called Total_Throughput
What is the exact syntax that I have to put into the query design form?
so: Total_Throughput: than what?
I have 2 tables, one called Addresses and Extended Areas.Within my imported orders I have addresses with postcodes and countries. My Extended Areas table has Country, zip_low, zip_high and extended area with a Y.I wish to check certain postcodes from a particular country between zip_low and zip_high, which gives Y if it is indeed a Extended area.
View 14 Replies View RelatedI have the following scenario and do not wish to use a crosstab for various reasons. I am combining three queries into one. The last query has information as follows:
Project Type Rev Budget
12345 Debt 100,000
23456 Impact 50,000
34567 Other 25,000
There are hundreds of these line items. The first two queries hold the project information as well and that would be the field that I would use to join each query. Currently the information above is in line form and I need to put it in column form to coincide with my other data. The final result needs to have the following column headings:
Project, Desc, Exp Budget, Expenses, Debt, Impact, Other, Rev Budget
Please note that the first four headings come from the first two queries so I have this taken care of. how do I change the query to put the Type by line item as a column heading and sum the Rev Budget accordingly without creating a table and doing appends or update queries? Can it be done in the query where I am combining the three queries?
I have two tables which I need to change stock levels. I have one table that has the stock levels as of now and another table that shows stock levels from yesterday. I need to produce a txt file so that it checks both stock levels and if the NOW stock level is different to the Yesterday stock level it shows only these items so that I can update them.
View 1 Replies View RelatedWhy is my query limiting itself to only 16 columns? when I tab right for another field, it jumps back to the first field. I have other queries with far more columns than that. My DB size is 3,400 kb.
View 3 Replies View RelatedI have two calculated columns in my query for example... table.num1 - table.num2 as "Col1" and table.num1 - table.num3 as "Col2"
I then want another column equal to:
Col1 - Col2
I know that I could say:
(table.num1 - table.num2) - (table.num1 - table.num3)
but I am wondering if there is an easy way to just take two calculated columns of the query to use in the calculation of another column.
doing something like:
Col3: Col1 - Col2
doesnt work because it doesnt see Col1 and Col2 within the tables.
I have a table that lists Cost Center, Partner, and Cost. I need a query to sum the cost when Cost Center and Partner do not match. How can I write that expression?
View 4 Replies View RelatedI have a table that looks something like this in structure:
P_date (date)
Location_No (integer)
Invoice_type_A (integer)
Invoice_type_B (integer)
Invoice_type_C (integer)
Invoice_type_D (integer)
I want to create a query which shows the sum of the number of all four invoice types for a specific date regardless of the Location_No. By putting something like "Invoices_total: Invoice_type_A + Invoice_type_B + Invoice_type_C + Invoice_type_D" in the top field I am able to get the query to show me the total number of invoices per date AND location, but I would like the total number of invoices for a given date regardless of location number. How can this be done?
I have several tables that I need to join together to create a single form for multiple entries. Job Table, OPR Table, Organization, Program List Table, Program Notes, Rank, Reference Table, and Status Table.
Ultimately, I need to be able to display all of these in one form and allow for adding/editing notes from the Program Notes section. I also need to be able to let the user look up all info by selecting the Program Name and have the other field populate correctly. The issue I am running into is that I cannot get the Program Notes table to join to the Program List table correctly.
This is what I attempted to use in SQL:
SELECT [Program Name], [Status], [Reference], [Self-Inspection], [IG Checklist], [Continuity Book], [Bragging Paper], [Program Strengths], [ORI Reports], [Best Practices]
FROM [Program List Table]
UNION
SELECT [Log Date], [Log Entry]
FROM [Program Notes]
However, I keep getting an error. I have read that it is because I don't have the same amount of columns, but the tables don't have the same information.I have also tried to do it through a normal query and through a third table, however I get errors about ambiguous outer joins and I can't seem to make that work either.
Simple example of what I'm trying to achieve...
Table with two fields:
read_date---read_value
--------------------------
01/01/13-----10
01/02/13-----20
01/01/14-----30
01/02/14-----40
Would like to create a query or queries that summarises the data as follows:
read_date--2014--2013
------------------------------
01/01/14----30----10
01/02/14----40----20
In words, read_date would list dates for the current year. Second column of query would give read_value for current year. Third column would give read_value for same day/month of previous year.
Have thought about using Dlookup to get value one year back, but not sure if is the best approach?
I have two column of expressions
1=(<(Now()+365)-([Service Interval]*30) Or <(Now()*365)-(([Service Interval]*2)*30))
2= (<(Now()+365)-(([Service Interval]*2)*30) Or <(Now()*365)-(([Service Interval]*2)*30))
I want to merge these two columns into one but then have two entry's not one !
And then I can sort by date in a report (i am trying to sort all service due for the customer in the next year)...
I have a file structured as listed below. I need to pivot Patient Id, Patient Name, Send Reason, Provider Name and Visit Number into columns and then insert the values into the corresponding columns.
My data set contains about 1,000 rows, so I cannot simply paste special in Excel.
Patient ID 111111
Patient Name Doe, Jane
Send Reason Cannot resolve provider
Provider Name Doe, John
Visit Number ABCD#F1234567
I have tried Pivot and Transform, neither of which seems to work.
I have a table with 4 columns :
Product Price Quantity Supplier
Product1 5 240 A
Product1 7 19 B
Product1 6 12 C
Product2 96 0 A
Product2 98 23 B
Product2 99 44 C
There are 3 suppliers for the products (name of the suppliers are A, B and C).I want to make a query with the following result :
Product1 5 240 A
Product2 98 23 B
In other words :Showing a grouped list (grouped by products), with the lowest price of the supplier who has stock (quantity >0).I can make a list of grouped products with the lowest price, but it's not possible for me to show the stock and the supplier that's related with it.
I have data like:
Code:
SubjectID VisitID VisitNum VisitDate VisitDetail Rspns
1 5 1 2/10/2001 Fever_1 Yes
1 5 1 2/10/2001 Age_1 12
2 7 1 5/08/2010 Fever_1 No
2 7 1 5/08/2010 Age_1 18
2 8 2 9/30/2010 Fever_2 Yes
2 8 2 9/30/2010 Age_2 18
etc.
I need to convert it to a non-normalized wide format, like this:
Code:
SubjectID VisitDate_1 Fever_1 Age_1 VisitDate_2 Fever_2 Age_2
1 2/10/2001 Yes 12
2 5/08/2010 No 18 9/30/2010 Yes 18
etc.
If I didn't have to worry about the VisitDate, a simple crosstab would do the trick:
Code:
TRANSFORM First(MyTable.Rspns) AS FirstOfRspns
SELECT MyTable.PatientID
FROM MyTable
GROUP BY MyTable.PatientID
PIVOT MyTable.VisitDetail;
I have a database that tracks students and their test scores. I am trying to figure out a way to where it will pull the student's latest test score and compare it to see if they fall within standards. So far I have 3 tables.
tblStudents
studentID
studentName
studentEmail
tblResults
resultID
resultStudent
resultDate
resultTest
resultScore
tblTests
testID
testName
testPassScore
The query I have written looks like this: SELECT tblStudents.studentID, Max(tblResults.resultDate) FROM tblStudents LEFT JOIN tblResults ON tblStudents.studentID = tblResults.resultStudent GROUP BY tblStudents.studentID." The data pulls just fine at this point. What I'm trying to figure out is how to then add more columns to this query to start doing comparisons. When I try to add more columns it tries to use them for additional grouping and adds many more records.
I'm looking for an expression or SQL for use in a query that will count the number of columns in another query. I do not need to count the records, I just need to know how many columns. I can't seem to locate a reference to a column count - everything points me to record count.
View 13 Replies View RelatedI have a problem to count a multi columns into one field. For example, I have a table consist of these fields (simplified version):
- id
- block_name
- handle_type (lookup: big and small)
- kernel_type (lookup: big and small)
- fruit_set (lookup: 1, 2, 3 and 4)
I want to create a query to count a combination of handle_type and kernel_type columns as one column. So the query field would shows these fields:
- block_name
- count_of_big_handle_big_kernel
- count_of_big_handle_small_kernel
- count_of_small_handle_big_kernel
- count_of_small_handle_small_kernel
- count_of_fruit_set_1
- count_of_fruit_set_2
- count_of_fruit_set_3
- count_of_fruit_set_4
I want to count data from my table ( Table ) and to display result like a dashboard (Desired result ). To count this do i need to write query for every column and then link to final column? i have totally 300 columns to count I am attaching Table & desired result images;
View 5 Replies View Related