Have a look in the attached screenshots
I'm wondering why the relationship interface is still missing many tools that perform the work more efficiently. The interface misses the following (comparing with what we have in the ArcGIS software)
1. Pan tool
2. Zoom in/out too
3. Zoom all tool
4. Automatic arrangement
I have 3 tables.
Table 1: contains staff names and contact numbers
Table 2: contains training above staff have been on or need to go on
Table 3: contains pc and printer asset numbers of above staff
I used a form and entered some new members of staff in table 1. They got their auto numbers etc but when I open table 2 and table 3 those new members are not showing up in those tables. I have checked the relationship status between the 3 tables and the staffID from Table 1 is associated to table 2 and to table 3.
What's stopping the new entries from showing up in tables 2 and 3 ?
My form was working fine but when I added an extra tab it started showing as completely blank in design view. When I deleted the tab I had added I still was left with the same problem!
I've attached an image of the form properties. I want to use the form to enter data so it needs to show even if there are no records.
I had read that it could be if there is no data but typing data in the tables hasn't worked either.
So you make this nice continuous form (or report) using the tabular layout, layout/format the whole enchilada... and then at some stage you need to add one more field to the display.
You could change the layout to stacked, drag the field from the Add Existing Fields list onto the layout and then change the layout back to tabular.
Is there any other smart way to add a field to a tabular layout in A2007, so that the label winds up in the header section and the textbox (or other control) in the detail section?
We have an application which is used in a couple of offices and on a number of terminals. The data is stored in a back-end database on the server on each site.The databases are getting to the stage that we cannot roll out changes to the back end table layouts relatively efficiently. What I want to do through vba if possible is basically have a blank local version of each table and say:
check tab_1 on linked_backend, if tab_1 layout <> tab_1_local layout then update the back end layout to mirror that of the local layout.
We cannot overwrite the data, but on occasion, we need to add an extra field to a central table as new bits of the application are developed.I've tried a few searches here, and am probably using the wrong phrases, but not getting any results.
I would like to export fields from Access 2003 with a comma pragmatically added between each field as a CSV file.
I am able to export the fields without the comma, but the Accounting Program that I want to use for the importing of the data requires a comma to separate each field.
Example
one,two,three,four,five
Hi,
I have a 3rd party desktop application to manage inventory. The data will be stored in local MS Access database. I want to sync any changes (insert, update or delete) made to this database to remote MS Sql server immediately or in batches using a scheduler.
Is there any method to know the changed rows in an MS Access table after x time. I mean I want to get all the rows in an Access table that have been added or modified after a particular date and time (say "05-23-2007 10:15:00") without using a user defined date time column in that table.
If i can do the above operation, i will write queries to get the added or modified rows and update remote server in batches.
Thanks and Best Regards,
Anz
Table has a relationship with master table. Joined on TractID primary table - auto number, TractID child table - number. This works as it should when adding a new record.
What I am trying to do is create a new key for each new record added in the child table with an ID that looks like this: TractID.A, TractID.B, TractID.C etc. for each new record added in the child table. if so where do I look, how to accomplish it?
I am wondering if it is possible to automatically create a new field in one table whenever a new record is entered in another table. The name of the field would be the primary key entry of that new record.
I have one table (table 1) in which each record corresponds to a particular mouse with a unique ID number, and each field is the ID number of a particular genetic marker. The table overall shows what genotype (+ or -) a mouse has at each marker.
In the other table (table 2) the primary key of each record is the ID number of a genetic marker, and the fields are several different bits of information about the marker (e.g. what chromosome it's on, its location on the chomosome, etc.)
I would like to have it set up so that if I enter a new genetic marker in table 2 a field named after its marker ID will automatically appear in table 1. Is there a way to do this?
I am still new to Access code.
I was wanting to know if there is a way to Add the Username to a table as a default value when a new record is added. I know you can add =Date() to get the date. Is there a simple way to get the ID of the person logged into Window?
I have a table A in which I write down orders for cars. A record is an order. A single order may contain multiple cars in varying quantities.Each car has its components. Some cars may have some of their components common. There is a table B which indicates each car and its components required with their quantities required to build the car. There is a record for each different car.
Now suppose there is a new car we are going to produce so we need a new record in table B for the car and all its components. Also we need a new field in table A because people can now order the new car(in some quantity).
With form for table B we can introduce a new record. But how can we add a field in table A automatically after a record is added in table B?
I have an existing table that has calculations. When I added a new field with an default value of zero, it did not populate the existing records. Now my tables are not calculating. How can I update the existing records with the new default of zero.
View 2 Replies View RelatedHow to make a custom ID format that increment every time you add a new record the sample ID look like this "HCCR-SMA-CV-ST-000".
View 4 Replies View RelatedUsing DAO recordset, table enters unbound fields data properly for desired records, but adds an extra record which is a duplicate of the first record entered....any known access quirks for adding unwanted records?
View 3 Replies View RelatedIs it possible on the Find Record button added to a form to adjust the search function so it defaults to a specific box on the form? I have a form for tracking employee's and on my Find Record button I would like it to default to the Last name instead of the Record number.
View 3 Replies View RelatedI have two tables of data, each relating to three business branches (branches A, B and C).
Table 1 shows the expenditure of each branch (by fuel, premises and wages).
Table 2 shows a number of units for each branch (mileage, floorspace and sales).
What I would like to do is calculate unit costs, based on the expenditure in Table 1, divided by a relevant unit in Table 2. The catch is that I want to have a third table which allows the user to specify which expenditure (from Table 1) is combined with which unit (from Table 2) to generate the calculated unit costs. I've been able to do this in Excel, and have attached an example. I've also attached an incomplete Access version with the first two tables. Given the complexity of my actual data, I feel this could be better handled in Access than Excel.
I am about to set up a database but wanted to check the relationship of the main tables before I add to it. I have attached the relationship design
For a PROJECT, there can be many TESTS, for a TEST, there can be many PRODUCTS
Is my design reasonably sensible?
I've only just started using Access 2007 at my new job. I've been asked to create a database that will show appointments for all 10 of the employees. I have created a table for the main schedule (where ill put all the data) then one for each of the employees. I've managed to link the tables no problem but it wont let me create and updating relationship. It keeps saying "no unique index found for the referenced field of the primary table". How do I fix this?
I want it to automatically update the date, time, location, customer name and description, if its changed on the main schedule for a certain appointment on the corresponding employees schedule.
I created two tables, but i don't know what kind of relationship i should create.
In the first table, i would like to put all different tests (medical tests, such as EMG test, and so on), in the second table, i want to add the settingup for each test, say, recording site, stimulating site et.al, then i want to use one form to populate data into these two tables, what should i do?
I am trying to define a relationship between tables. However, the unique nature of my data doesn't seem to be allowing typical relationships. I am not sure if I need to somehow create a relationship (junction table?) or just keep things as they are. Do I need a Foreign Key? FYI, I am only querying the data - no updates.
I have two tables that I am able to join by using a field in Table1 tied to a portion of a field in Table2. No other columns in either table can reliably relate the two tables. For example:
Table1.ColA has a 5 character string.
Table2.ColA has a 10 character string.
I need to match Table1.ColA to Table2.ColA where the first five characters in Table2.ColA match Table1.ColA.
This match, produces 1 to Many results (for every Table1.ColA string, there are 1 to many Table2.ColA records that match.
IMPORTANT FACTORS:
- Table1 contains data at a SYSTEM level.
- Table2 contains the parts that make up the "SYSTEM" in Table1
- The PARTS in Table2 can be in 1 to many SYSTEMS from Table1
- Table1.ColA is not unique by itself (it's part of a composite PK in Table1).
- Table2.ColA is not unique by itself (it's part of a composite PK in Table2).
Hi,
I have a db with two table.
Table1 Trade has the following among other fields: RefNo (autoNo) PK, TradeDate, HostName, Methodology, etc.
Table2 Market has the following among other fields: MarketDate as Date ( ), USD/EUR_Rate, USD/CHF_Rate, USD/BRL_Rate, etc.
I need to link both tables so that the TradeDate correspondes to the MarketDate. what is that say on TradeDate if it is on 15/01/06 I can see what the Market values for the MarketDate corresponding to that TradeDate.
I tried to link MarketDate as PK on Market table2 to TradeDate on Trade Table1.
It seems to work but it does not seem right as sometimes I get errors in entering data, etc on the Market table2.
The MarketDate is unique meaning only one data of values for a given date, they can be modified but not duplicated.
Can anyone help, on the best solution for the links to work?
Thanks
dfuas
I feel confused about something and I have the need for assistance because solving this small thing would make my life easier. I very much appreciate you taking the time to read this.
I'll focus in on a small part of my database:
----------------
| tblBreakpoint|
----------------
| BreakpointId |
| Remarks |
| ... |
----------------
each Breakpoint can have only one Module and a Module can have many Breakpoints
----------------
| tblModule |
----------------
| ModuleId |
| ModuleName |
| .... |
----------------
each module can have only one Function and a Function can have only one module
----------------
| tblFunction |
----------------
| FunctionId |
| FunctionName |
| ... |
----------------
I want to normalize my database as much as possible.
I will make a make a form for Breakpoint containing two comboboxes. The top combobox will contain all Modules and I want the second combobox to contain only the Functions that are related to the selected Module from the first combobox.
I know this can be programmed, that's how I do it now: in the onChange-event of the first combobox, I load the content of the second combobox.
However: what I would like to know specifically 3 things:
--> what is a common way to solve this?
--> Is there a way to solve this using just table-relationships? (drop 2 cbo's on the form and with correct relationships access populates the second and/or the first automatically)
--> What are the correct table relationships for this and therefore what missing ID's (used for relationships) have to be filled in in the above 3 tables?
Hi:
Tables:
I have 2 tables, there are same fields: Name, Date, and Invoice #
I make a relationship between 2 tables, connect Name, Date, and Invoice #
And click "Enforce Referential Integrity", "Cascade Update Related Fields", and "Cascade Delete Related Records".
One-to-One.
After that, I go table 1, create a record, then close it, then open table 2, the record I created in the table 1 is NOT over there. Does the relationship create record? It only update and delete. What about Add ?
Please let me know about it. Thanks.
is it possible touse visual basic 6 for example to create an interface for the finished access database so that I can create an install application for users that do nothave Access.
in other words, I want to have a standalone application through VB 6 that will manage the database application.
regards
I need to develop an intranet site to allow not just read only but write access using either Access 2002 or 2007 (maybe). Does anyone have any advice to which is the best tool to use? I have Dream weaver MX already but I’m not that good with it, I have been looking at CodeCharge Studio 3.1 online Has anyone used it?
Thanks.
:)
Hi People,
Another question,
My database is looking good now, but I have one question, I dont want users to view it as I do, i.e with all the wizards etc, so how do I create an interface which does not allow the user to view the backend?