Hi!
I have two tables Atable and BTable and both have a field called AcctNo. In Atable, it is type of Number and in BTable, it is type of Text. When I do a join with these two tables
select * from Atable, BTable where Atable.AcctNo=Btable.AcctNo
I get error saying "type mismatch".
My question here is: How can I convert a type from number to string or string to number in my sql statement?
Thanks,
Aijun.
A bit of a longshot me thinks! But anyway... can you make a measurement converter on Access 2013. I would like to be able to convert meters into feet and feet into meters!
View 5 Replies View RelatedI have a field on my Report called Revenue. It is used in a calculation and there is a calculated field called Profit. Revenue-Cost=Profit. That all works.
The only thing that is wrong is that the Revenue field displays its numbers like this:
0.7
12.43
4.3
0
etc.
i.e. not formatted for currency. But I don't get the currency option under Format. It is based on a Query and this Query is based on a Linked Table.
Any suggestions on how to get it formatted as currency while still having the calculated field working?
how I can convert the first column to show the number? I used the expression below, but it does not convert anything with a letter or a 0
Expr1: Val([SPPC TEST]![JULY_ACCRUAL_ADJ_X])
I need to run a query that converts a 19 digit number stored in a Short Text field to a hex string
Example of the string is "3310854670615838865" the result should look like "2DF284C801000091"
I have a form that takes input to the first, indexed, field from a barcode reader (and keyboard at a pinch). The data coming in has always been numeric so I have several checks in place to ensure it is numberic (field specification) and also that it lays in a predefined range. All works well! I've now been asked to enable this to work with a single letter prefix e.g. T1234567.
As there are many forms which use this same field I'd like to keep it numeric and as the prefix won't change I can add it later using a query. Is there a way to programatically strip the first letter from the string and use CLng() to convert to numeric using the on entry Event Procedure? All my other validation is here but I can't see a way to do this. Failing that, can I use an unbound text box to take the entry and set the index field?
I have an expression that converts a string to positive/negative number. It seems to be working fine, however, it doesn't convert "00000000001}" to -10. It shows as 10.
This is the formula that I am using in my query:
PJUNAccrual: IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",-1,1)*(Val([PJ_ACCRUAL_ADJ_X])/IIf(IsNumeric([PJ_ACCRUAL_ADJ_X]),100,10)+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "A" And "I",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-64)/100,0))+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-73)/100,0)))*100
I have been trying to convert string into double number format. I am running a SQL query in VBA that returns a double number format; however my understanding with SQL queries in VBA is that they return string only. The results are showing up perfectly fine when I run the query in the query editor; however when I try using the returned value in further calculations in VBA I keep getting a "Type Mismatch" error.
View 7 Replies View RelatedI want to convert a number column into a text column.
Number Column is called Customer.
Below I can't match to the other table containing the text column Customer No.
How can I convert columns in vba?
Code:
strSQL = "SELECT CALCULATED_Forecast_TNS.*, USEFUL.TRP_in_EUR " & _
" FROM USEFUL INNER JOIN CALCULATED_Forecast_TNS ON (CALCULATED_Forecast_TNS.[Reference No] = USEFUL.[Reference No]) AND (USEFUL.[Customer] = CALCULATED_Forecast_TNS.[Customer NO])"
Set qdf = CurrentDb.CreateQueryDef("REPLACABLES", strSQL)
DoCmd.RunSQL "UPDATE REPLACABLES SET CALCULATED_Forecast_TNS.TRP_in_EUR = USEFUL.TRP_in_EUR"
The dates in my table are strings that appear as 12305 (1/23/05) and so forth. So some are 5 and some are 6 digits depending on the 1 or 2 digit month. I want to convert them in my query to a date field. I think I have to use the DateSerial and extract the parts of the date, but that leading 0 that is not there is throwing me off. Any easy solutions?
View 2 Replies View RelatedHi,
I have a field in my database which captures either single digit numbers or comments in text format. I want to be able to count the numbers but obviously I've had to use a memo field in order to capture both numbers and text.
The only way I can think of is to take the field and look for single character responses, then convert these into a number field so that it can be counted.
Does anyone have any idea how to do this?
Thanks.
I am trying to create an order ID field based on the 1st 3 letters of the name of the buyer and the date of purchase. For example, if the buyer is James, I want the order ID to become JAM010112 (If the date is 01/01/12). How do I go about doing this?
View 1 Replies View RelatedHihi
I have a field containing data in this format
01Apr04:12:34:56
for example
It is not recognized as a date by Access, so it is stored as text
I need to put it in any general date/time format, like
dd/mm/yy hh:nn:ss
I also need that Access actually reads it as a date/time (not a string) to be able to merge with other data, then sort chronogically.
How can I do that (please no code, only query if possible, i'm really a newbie...)
thx!
caroline
In my query I want to extract the last 10 characters of a string in a column which represent a date in the format DD.MM.YY and then convert these to a real date format to be available for further processing.
My query looks like this:
SELECT Angebotskopf.[Laufende Nummer], Angebotskopf.Angebotsnummer, Angebotskopf.Angebotsdatum, Angebotskopf.Anfragedatum, Angebotskopf.Kunde, Angebotskopf.Ansprechpartner, Angebotskopf.Telefonnummer, Angebotskopf.Faxnummer, Angebotskopf.Projekt, Angebotskopf.Preis, CONVERT(varchar(10), RIGHT(Angebotskopf.Projekt, 8),104) AS TestAngebot
FROM Angebotskopf;
But Access gives an error message "unknown function 'CONVERT'"
The "RIGHT" functions works but the resulting column is not being recognized as a date, it is a only a string and therefore useless for processing of any date related calculation.
I have a string value that comes out of a query in the form of
01012015
02012015
12012014
etc...
where the first 2 digits are the month, the next 2 are the day, and the next 4 are the year.How do I convert these values to a valid date that can be queried on?
In the following statement i tried to send BeginningDate(textbox value) and
EndingDate(txtbox value) to the SQL stmnt but it gave an error saying "Type
Mismatch" even though i used CDate method. answer for this problem is greatly
appreciated......
"WHERE Project.tProjTitle='" + Trim(cboProjectTitle) + "' AND
Project.nProjId=Indicator.nProjId AND Indicator.tIndicatorName='" +
cboIndicator + "' AND Indicator.nIndicatorId=IndicatorData.nIndicatorId AND
Region.nRegionId=IndicatorData.nRegionId AND
Institute.nInstituteId=IndicatorData.nInstituteId AND" + _
"IndicatorData.indicDate Between '" + CDate(BeginningDate) +
"' AND '" + CDate(EndingDate) + "' " + _"GROUP BY
IndicatorData.nRegionId, " + Trim(Replace(cboRows, "_", ".")) + " "
I have strings with hours and mins i.e "1 hour" or "7 hours 30 mins" or "10 mins". how to convert it to timestamp hh:mm so i can caclulate the totals?
View 1 Replies View RelatedThis has to be a simple way to convert a positive number to a negative number. For example, convert 5 to -5. The field is quanitity and I wanted to convert to negative number. I tried to use negative = "-" & [quantity] but it doesn't work.
View 2 Replies View RelatedI am connecting acces to oracle servers via ODBC .
In the table there is a date time stamp - format data type text:
20130225060621
I would like to convert so that it is recognised as a date so I can calculate against e.g. Now() or another standard date format.
this is what I am currently using (which is OK) BUT I need to calculate against the time also.
Current Check Point Date: CDate(Mid([DZ_ZPKT_AK],7,2) & "/" & Mid([DZ_ZPKT_AK],5,2) & "/" & Mid([DZ_ZPKT_AK],1,4))
I spoke to an IT guy who works in TOAD program and he gave me this SQL:
select to_date(dz_zpkt_ak,'DD/MM/YYYY HH24:MI:SS')from orders where ordnr='4411310';
this is the format I would like but cant make this work.
I am in the process of building a new database in SQL to replace my MS Access database. However, I will continue to use the Access forms, queries, and reports. The new tables will house much of the same data. In multiple tables I have hyperlinks that were created and added in the original Access tables. To import these hyperlinks into the new SQL tables I have converted them to 'Long Text' before exporting, thus changing them into strings.
For example:
Hyperlink - Email - Add Additional Mailbox to Outlook (2010) has been changed to:
Email - Add Additional Mailbox to Outlook (2010)#ServernameServerfolderDocumentationRea dy to GoOutlook TemplatesEmail - Add Additional Mailbox to Outlook (2010).oft#
The obvious issue that I am running into is that after the SQL database table has been linked to the Access database it still displays the entire string when I open the table. The form has a textbox and search button that is used as a search function. This runs a query that returns all "search results" for the desired information. Is there a way that the query can convert the string back into a hyperlink so that the query displays just Email - Add Additional Mailbox to Outlook (2010) as a hyperlink and not the entire string?
I would like to convert a text string to integer.
Lots of posts say to use val, but it is not listed in access 2010
So I am trying,
Creating a field that is numeric then just referring to the string field.
This works good except where it finds actual text. It puts the value "#Type!" in there.
Would there be some kind of function to check for an error or check if the value is text.
i have data stored in my paid field as negative ex: 000000460p which is $40.00. how can i convert this into $40.00?
I know i have to make a query but how can i make access pick up all the negatives that end in P and transform them into a negativ e number?
thanks
Hello Everybody...
I have a Question.
How do I convert a number (26) to 26:00 Hours.
The thing is.
I have a database that calculates the hours of overtime.
for example.
I work from 7:00 to 19:00.
Then I get 12:00 hours of total time.
The above is no problem.
But no I want to deduct the number 2 from 12:00 hours.
I hope to hear from u guys soon
I would like to convert a date field to a number in a query. What I am trying to do is take 2 date fields and see how many days they are apart. For example if one date is 3/1/07 and the other is 3/1/06 I would like 365 days to be returned. Thanks for any help!
View 2 Replies View RelatedI am importing data from a text file that contains dates in this format: 08012007
I am trying to convert the number to a date 08/1/2007 so that I can run date related queries.
I have a table with the following fields:
Tool Text
Tool_ID Text
Description Text
The Tool_ID field holds a number if the tool provides a tool id. However, if the tool doesn't provide a tool id, the text "No tool ID given" is automatically placed into the field. Therefore, it needs to remain a text field for this reason and others that are too long to go into.
Anyway, I created a query that pulls only one specific tool which always provides a tool ID. Therefore, the results of my query will always have a number in the text field "Tool_ID".
Question: Is there a way to convert the text field to a number field within the query?
Thanks in advance!
~ Greg