How to display field types of access tables in vba?
can any one show me how i can display display field types(like : phone integer ....) of
access tables in a text box using vba? I have no idea how i
can obtain that information using vba. Looking forward to your
replys.Thanks
I am needing to link two tables but one field is in a "May 2012" format while the other table is in a "053112" format.. Is there a way beyond creating a formula to change "053112" into "May 2012"??
View 2 Replies View RelatedWe have been using an Access (Access 2013) program where we link the program to dataviews created in sql server.
Recently we had to re-link the data views because a change had been made to them. When we relinked the data we noticed that the field type for the field used as the primary key changed from "Short Text" to "Long Text". The programmer who created the dataview from sql server said that nothing was done at that end that would have caused the change
I know how to prevent the problem from recurring. We are changing the sql server spec from VARCHAR(8000) to CHAR(20).
I have a table that has a date format DD/MM/YYYY this is good for some records that the date is known, however some records are more generic and the format is MM/YYYY, is it possible to be able to type both formats in the table (and consequently in the form)?
View 1 Replies View RelatedHi,
I have 2 linked tables, I would like to join these tables in access, however the first table's field is a memo and the second table is a number. I have tried to cint() the field in a query but I get an error message "Explicit conversion from datatype text to smallint is not allowed"
Any ideas how to get around this problem?
Thanks
Michael
I have the following input mask for a certain field in an ACCESS 2010 table : 00-000-a-a-a;0;-
It works fine. That is when I tab down to it and if I know that the format is : xx-xxx-x-x-x
but if someone does not know the format , things can be out of position.how do I code the field such that the format (xx-xxx-x-x-x) is displayed in the input field awaiting the actual keying of the data?
I am building a table where one of the fields is a yes/no field type. When the yes box is selected, I need to "jump" to a different set of field names than field names for selecting no. I have researched on internet and have done some reading but have found no information. Is it possible to do what I want to do in Access? My skill level is that I can build tables, create forms, create reports and run simple queries. Any help offered is appreciated.
View 8 Replies View RelatedI create a table that have one hyperlink data type and i want to open a existing form that i created using this hyperlink.
Can this hyperlink data type open a form in the same access database? or open form in different access database?
Using hyperlink button have the function to open form in same database but the problem is this function is not available in hyperlink data type.
I want a field that I will enter the current work experience of an employee years and months and i would like it to update as time passes. I am willing to accept it displayed as a decimal, i.e 4 years 7 months would be 4.7, I would just need to have it calculate on base 12 but I don't know how?
View 1 Replies View RelatedI am trying to create a calculated field in my table, I am trying to use the following code:
DatePart("ww",[Gas]![Date Opened])
I receive the following error message: "The expression DatePart("ww",[Gas]![Date Opened]) cannot be used in a calculated column."
Access 2007 - I really need to be able to display the week number in the table, based on the Date Opened field.
I have a database for recording jobs and invoices for our transport company. I was thinking of adding an "Attachment" type field to my invoice table to store pdf's of scanned copies of the delivery notes relating to the invoice. How this will affect the performance of the database? Will adding this field greatly increase the size of the database and slow the whole database down?
View 1 Replies View RelatedIs there a way to display the size of the tables? I am using Access 2010.
View 4 Replies View RelatedI am trying to do a comparison between two values and am getting the following error:
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
The code that is creating the error is as follows:
sb = Request.Form("storyboardscreen")
if Not Lcase(Request.Form("AllStoryBoard")) = "all" then
whereClause = whereClause + "theStoryboard = " + sb
end if
I am using the statement to build the where clause of my query. The sb value is retrieved from a pull down menu and "theStoryboard" column is the db is of data type "text". The values stored in the field are 12 digit numbers. I have tried doing a cstr to sb but that doesnt work, any tips on what I am doing wrong? I am using asp with an access db....
Thanks
All, using access 2010. How do I display the default value of a date/time field to just the current year instead of using =date() to get the full date.
View 5 Replies View RelatedHi Everyone,
I have a PO table. Each PO has 3 documents of multiple types (one may be Word, other may be Excel, Acrobat). When I display the PO, the attachments should be shown as Icons, which when double-clicked, will open in its own Application.
I have a pop-up screen where I enter new PO details. In this screen, I have Attach/Detach buttons for each of the Documents.
My Requirement:
When I press 'ATTACH' of Doc1, the File Selection screen should be displayed from where the user will select the file to be attached. This file should be updated into the table field "doc1".
When I press 'DETACH' of Doc1, the file in table field "doc1" must be cleared.
How can I achieve this???:mad:
For reasons I need not get into as it generally proves to be a distraction, I need to document the relationships in databases.
I've been playing around with .Relations with some success.
I can easily get the relationship's name, Table Name, Table Field, and ForeignTable.
Code:
For i = 0 To objDestDB.Relations.Count - 1
With rsMigrateRels
.AddNew
!RelNumber = i
!RelAttributes = objDestDB.Relations(i).Attributes
!RelFields = objDestDB.Relations(i).Fields.Count
!RelFieldsName = objDestDB.Relations(i).Fields(0).Name
!RelForeignTable = objDestDB.Relations(i).ForeignTable
!RelName = objDestDB.Relations(i).Name
!RelPartialReplica = objDestDB.Relations(i).PartialReplica
!RelProperties = objDestDB.Relations(i).Properties.Count
!RelTable = objDestDB.Relations(i).Table
.Update
End With
Next i
However, despite lots of digging into the other properties and attributes associated here, I cannot yet figure out how or where to get the:
ForeignTable field
The type of relationship (1:1,1:many,many:many)
I have a database application that I have to get to display some external PDF files.
I thought that I would create a command buttone and use that to open the files, but that doesn't want to work. Can anyone provide some thoughts on how to open a Word document or PDF file from within an access form? I only need to display it and then close the file so it doesn't have to be anything fancy.
Help
Hello everyone
I am in need of assistance with Microsoft Access. In the reporting function of Access I am trying to have a summarization total of indirect time and direct time based off a Auditor Timesheet form developed. On the report I am able to see both the direct time and the indirect time hours seperate per auditor based on the query that is run to seperate direct and indirect hours and each individual auditor stats.
but the problem I am having is trying to summarize on the report the total direct and indirect hours as a whole.
Please let me know if this a simple solution by building an expression in the field for the report or some type of VBA code input which would suffice?
Thank you
hello good afternoon.
i am trying to open different file types using ms access. the following piece of code i found would only open 'word' documents. how do i make this piece of code more flexible to open pdf documents and excel as well. as it is currently i have a txt field on my form and if the path in the txt fiels leads to a word document when i click a button the word file opens. i want it to open a pdf or excel doc if it was in the txt field
[code]
Sub OpenWordDoc(strDocName As String)
Dim objApp As Object
'Opens the document
Set objApp = CreateObject("Word.Application")
objApp.Visible = True
objApp.Documents.Open strDocName
End Sub
Looking for a way to use transfertext to make a table and create a spec file from csv files I am importing. I want all fields in the table to be shorttext.
Otherwise I need another way to bring the files into a table.
I have a generic spec to use that brings in any data as text.
Created the spec from a delimited file with 255 text fields... Field001, Field002, etc.
However the field names need to be changed. My field names are in the first row of a table. I will need to read each fields data in the first row and rename the field.
In the Access Table, how does one Find and Replace part of the hyperlink if the Text to display is different?
Example of Hyperlink Editor:
Example of Find and Replace
In other words, I'd like to find FAKESERVER and replace it with C:Users in all 1000 records. Is there any possible way to do this if there is Text to display?
I am working in MS Access 2000. I have a query that is returning a table with various types of data. The problem is I can't seem to find anywhere in the Access GUI that will show me the data types of columns it has returned so I can't manually create a table to hold the values returned by query. Question is two fold:
1. Is there a way in Access SQL to import data returned from a query into a table that is not yet defined. Some like this:
a. Create a table that has a primary key but doesn't yet know the number of columns and/or data types of those columns.
b. Import the data from a query into this table and have it create the columns and copy the data types and populate the table while also numbering each row by primary key.
or
2. Is there a way to find out what the data types are for a table returned by a query in MS Access. I have checked the properites of the query and have been up and down the gui looking but I can't find a way while looking at the data returned by a query to explicitely see the data type (i.e., number, Date/Time, etc..) used by each column.
Any info would help. Thanks.
I am new to Access 2010. When working with a form, how do I display the field list? The list of fields for the table associated with that form.
View 1 Replies View RelatedI'm trying to set an input mask for a text field.
The data will be 1 to 4 digits preceded by 1/
I have tried the masks 1/####;; , "1"/####;; 1/####;; , "1"/#### , '1'/#### but none work as if the first nubber entered is a 1 it replaces the 1 in 1/
If it is a 2 then it works fine.
I can set the 1 to and f (f/) and it works no problem.
I have table of transaction data, I want to count the number of successful customer transactions but the table includes cancelled transactions with a negative value. I was therefore looking to create a new calculated field for customer count which report either "1" or"-1" depending on if the price is positive or negative. The idea being a count of this would give the customer count. The expression I am using is:
IIf([Price]>=0, 1, -1)
The problem is it I get an error message saying "The calculated field cannot be created" "verify that expression "IIf([Price]>=0, 1, -1)" includes fields that exist in the current table"
I have a database that was built 5 years ago that has an auto field with an integer. There are relationships attached to this. I an rewriting it to simplify the database and I need to keep the relationships somehow. I want to make the auto field a text fields. How to work this out...
View 3 Replies View Related