How To Display Totals At Bottom Of Query Or Report

Sep 11, 2014

I have some columns with hours. I want to simply display the total below each column. I would like to do this in the query results and in the reports that I create.

View Replies


ADVERTISEMENT

Combining Reports To 1 Report To Display Totals

Aug 29, 2005

I have monthly reports developed from various query's and what I want to do is have a single report that I can display my monthly totals from each monthly report without developing a whole new report. I want to use the existing totals from the monthlies and have them all on one report. Can anyone help me?
Jaxfire

View 8 Replies View Related

Queries :: Totals Sub Report Does Not Display Currency Formatting

May 28, 2015

I have a main report with 5 sub reports. There is a detail page for each company and a totals page at the end. The record source for each sub report is a Union query (combines the detailed information with the total information.

One of the sub reports displays currency amounts. The detailed reports display the currency correctly: $26,001 (no cents). The totals sub report does not display the currency formatting: 468934

When I run just the totals query the amounts display correctly ($468,934) by using the CCUR(TotalAmount) variable type conversion. The VarType for the amount field in the totals query is 5 (double precision).

When I combine the detail query and totals query into a Union query the detail amounts display correctly but the total amount is missing the formatting.

Here is the union query.

SELECT TblCompany.TblCompanykey, FormatCurrency(ProviderCostsRetrieval([TblCompanykey],1),0) AS TotalCost
FROM TblCompany
ORDER BY TblCompany.TblCompanykey
UNION ALL SELECT 9999 AS TblCompanykey, CCur(Sum(([QryRptProviderCostsDuringPeriod.TotalCost]))) AS TotalCost
FROM QryRptProviderCostsDuringPeriod
GROUP BY 9999;

View 2 Replies View Related

Reports :: Display Total At The Top Of Column Instead Of At Bottom

Mar 15, 2014

I have reports that total the figures in a column and displays the total at the bottom of the column. I would like to display the total at the top of the column since the length of the column continues to grow and I would like to see that total before scrolling down to view the various individual entries.

No matter how I try the =count(x) always shows an error. Is it not possible to display the total figure at the top of a column instead of at the bottom?

View 1 Replies View Related

Forms :: Open A Subform And Display Last Bottom Record

Jun 27, 2014

I got a form / subform relationship.how to locate the bottom record, when the user after some queries input at the main form. I desire to display the bottom end record (EOF), instead of some sorting and display the last record at top of the subform!!

View 11 Replies View Related

Reports :: Formulate Statistics At The Bottom Of Report?

Dec 21, 2013

Is there a way of formulating statistics at the bottom of a report?

Heres what i have.

The report pulls Rank, Last Name, First Name, Assigned weapon, Weapon qualification date. After 6 months i use conditional formatting to highlight the soldiers qualification date red. Im in the military that's why im tracking all this, but I need figures to report to higher, and at the bottom i would like it to show, "#Qualified", "#UnQualified","% Qualified", "% Unqualified", "#Expired","%Expired"

View 1 Replies View Related

Reports :: Extra Spacing At The Bottom Of A Report?

Jul 16, 2013

I have a sub-report and the last row is highlight, however, there seems to be extra spacing after the last row. I removed all report/page header/footer so all what's left is the Detail section but I still have this white space after the last row.

View 5 Replies View Related

Reports :: Grid Line On Bottom / Last Record Of Report

Oct 25, 2013

I created a report that only has gridlines around the outside border of the entire report (rather than around each record). I want the grid line style on the last/bottom record to be solid so it boxes in all the records. When I change the "Gridline Style Bottom" for the records, each record has a bottom gridline rather than an outside box around all the records.

View 1 Replies View Related

Totals Query/sums/grand Totals

Sep 4, 2007

Hey all! This is my first post. Been searching through the net all day trying to find a solution to this problem. Basically i have a table that looks like this (regular text is what i have and bolded text is what I need:Name Date Qty MOBrad 12/12/2007 23323 4423John 12/11/2007 3445 4432 John 12/11/2007 344 4432 John 12/11/2007 45 4432 John 12/11/2007 44 4432 John 12/11/2007 3445 4432 Grand Total: (Qty)And then I'd like to be able to carry this over and display a grand total at the bottom of every page of a report that I would need to generate. Our company produces forms and we sometimes have 60 - 70 people working on a single job. We want to see their hours individually but we would also like to see a grand sum of all their hours. If someone could help with this or needs more info let me know. Thanks for all your help!

View 14 Replies View Related

Reports :: Unfiltered Report Footer Totals On Filtered Report?

Apr 10, 2014

I've done this once entirely by accident and can't seem to duplicate it...

I have a report. It has the following:

Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments

Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?

View 4 Replies View Related

DataMacro - Calculate And Display Totals On Parent Form

Apr 16, 2012

I have a form, with a sub-form, from which a call a datamacro to calculate totals(from the same table as the control source of the sub-form) and then want to display the totals on the parent form!! The RETURNVARS all have the correct total values, but i cant assign them to a control on the parent form!! none of the controls are recognized when i try and set the PROPERTY VALUE to the totals? (spellings are definitely correct)...

View 2 Replies View Related

Queries :: Column Totals To Display On A Form - Auto Refresh After 2 Minutes

Mar 5, 2014

I have a database which has a table for the quotes prepared, each record has a quote amount. In a query linked to that table I have the ability to get just a specific month view which shows all totals in that month. I want to calculate a grand total for the amounts shown in quote amount:

Record 1 : 100.00
Record 2 : 100.00
Record 3 : 50.00

Grand total : 250.00

Then I want to display this grand total on a form which is visable on a screen based in the office that has an auto refresh on it so after 2 minutes any new records added to the table will increase the grand total on the form on the screen.

I have worked out how to do the totals bit, but now I need getting this figure (I.e. 250.00) on a form without having to run the query and have it looking in the background.

View 3 Replies View Related

Query/report To Display Most Recent Record

Jun 1, 2006

My database includes a Project table and a Status table. They are linked by the ProjectID. The status table contains records sorted by date pertaining to work accomplished on each project. I have created a report based upon a query to give me an update of the status of each project. I only want to see the most recent record for each project from the Status table in my report.

How can I accomplish this?

View 7 Replies View Related

Display Value Of Parameter Query In Report Title

Nov 21, 2011

I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]

Then in the report title I wrote:

=Limousines booked for&" "&[JobDate]

But it's not working.

View 1 Replies View Related

To Display Parameter Query Criteria On Report Even For Nil Results?

Nov 10, 2005

Hi,

Need advise on how to display on my report the criteria that i had specified in the parameter query even if the result is nil.

How can this be done??

Thanks!

View 5 Replies View Related

Report Totals

Jul 12, 2005

this is going to be kind of hard to explain...but here goes:

i have some values grouped in a header on a report. I need to be able to get totals for these values within the group... here is what i tried:

i created a new textbox, set the control source to equal the textbox i want to total up, and then set the running sum of the new textbox to "over group". this gives me the right result, however I only want the new textbox to be visible at the end of the group. so now what i essentially have is a textbox that keeps a running sum of another textbox...

how can i make the textbox only visible at the end of the group? i tried the "on retreat" event for the group so that it will make the textbox visible at the end of the group, but it didn't do anything. i'm not sure what "on retreat" does, but i guess it's not for that.

anyone have any clue as to how this can be done??
just to clarify, this is pretty much how i want it to be set up

0 <---repeating textboxes
1 <---
5 <---
8 <---
6 <---
1 <---
3 <---
-
24 <---new textbox for total

thanks in advance for your help
*j

View 3 Replies View Related

Sum Totals In A Report

Mar 16, 2008

I have a report that sum's up three colums:

=Sum[Totalhours] (text60)
=Sum[HolidayHours] (text61)
=Sum[SickHours] (text62)

the text60 etc are the name of the field with the sum function in.

I have these placed in the work date footer and they total up the colums ok.

What I need to do it add the Total Hours + Holiday hours + Sick Hours in the report footer to give me a total hours to pay then I will need to multiply this value by a Pay Rate.

I have tried:

=[text60]+[text61]+[text62]
=Sum[text60]+[text61]+[text62]
=Sum([text60]+[text61]+[text62])
=Sum[TotalHours]+[HolidayHours]+[SickHours]
=Sum([TotalHours]+[HolidayHours]+[SickHours])

Any help would be great as I am stuck on this one.

View 12 Replies View Related

Sum Totals In A Report

Apr 1, 2008

I am trying to add hours entered in a short time format. For example 08:15 or 02:55. I also would like it to give a total number of hours beyond 23:00. Here is a table with a Name Column and Hours Column

NameHours
BETTER,HEATHER8:00
BETTER,HEATHER8:00
BETTER,HEATHER5:41
BETTER,HEATHER2:35
BETTER,HEATHER1:15
WILLIAMS,R2:30
WILLIAMS,R0:45
WILLIAMS,R11:20
WILLIAMS,R8:25
WILLIAMS,R8:15
WILLIAMS,R10:20

How do I

A) write a query to add up the hours. I believe Heather would total 25:31 Hours.

B) Show this same total in a report?

View 2 Replies View Related

Help With Report Totals

Dec 17, 2006

I have a field which is a tickbox - yes, no response.
In a report i want a total of the fields that are yes.

How do i do this?

I have tried things like = Count([Matrix is true]) but this just gives me an error.

Also is there a way (once again in a report) to find the total of all the fields that have the first three letters being MAT...?

View 2 Replies View Related

Report Totals

Jun 21, 2007

I have a report that shows property address in the address header. Then lists in the details all work done at that property.

I need to total the number of properties we have worked on. The problem I am getting is if we do two jobs at one property then the total property worked on number is increased by the extra job done at that property.

I am using the following in a text box on the report footer: =Count([houseno] & " " & [streetname])

Hope someone can give me a clue where I am going wrong.

Thanks,

View 2 Replies View Related

Modules & VBA :: Write Select Query That Will Search The Data From Bottom To Top Of Table

Dec 3, 2013

see below the code . The select statement searches the Printpoolno value from the top to bottom in table tblmaster. As in my table tblmaster there are thousands of records and it takes long to search for that Printpoolno from the table . Is there anyway we can write a query that will search the table from bottom to top as the Printpoolno will always be in the bottom records and not in the top records.

Code:

Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim r As Long

[Code].....

View 3 Replies View Related

Report Totals Not Displaying

Jun 7, 2005

I have a form with 2 buttons on it, I'll call them button 1 and button 2. When I click on button 1 it calls a class that will go through and calculate some totals and then write them back to a table, all access to the table is managed through ADO. Then I can go over to button 2 and pull up a report displaying the totals. Although when I click on button 2 the report will be about half empty, only displaying 0's in most cases. If I close the report and open it again using button 2 all the data will be populated. What is going on here???

Thank you for any help

View 9 Replies View Related

Problem With Totals In Report

Jun 24, 2005

Dear All:

Code:

=DCount("[Transcript type]","[TRANSCRIPTS]","[Transcript type]='Official Copy'")

The "Transcript type" is from a combo box where the choices are "Official Copy" and "Student copy".

The above is what I am using in a textbox in a report to return the total of "Official Copies" and Student copies" requested.

This report is based on a query where I have "Between [Start Date] And [End Date]". I can select the dates to give a total for a specified month.

Unfortunately, the report returns ALL totals of the "Official Copies" and ALL totals of the "Student copies" for records in the database and NOT the total for the requested dates.

Does anyone know how to fix this?

Any help is most grateful.

Regards,

Dion

View 4 Replies View Related

Wrong Totals On Report

Sep 13, 2006

Hi there.
I have a report which has multiple pages with multiple running totals. It is an invoice style report producing an invoice run for all customers at once. The invoice detail lines are a subreport for each customer. Every time a customer changes a new invoice page is produced (grouped by customer). If there are no invoice detail lines for any one customer a total is still displayed using the IIF command to avoid #Error totals. A running GRAND total of ALL the invoice totals is displayed as a report footer. The problem I have is when I generate the preview report and flick to the last page to see the grand total it is there no problems. However, when I print it I get a different amount!!! If I then start leafing back through the invoices on-screen - say 20 - 30 customers - then go to the end again the grand total changes again! I know the grand total shown initially, when going straight to the end is correct as I have checked it with queries. The report is 630 pages long. Any ideas as this is driving me nuts! (I assume it has something to do with using the IIF statement or perhaps the subreports?)

View 1 Replies View Related

Report Not Showing Requested Totals

Jun 24, 2005

Dear All:

I am totally clueless on this one. Here is the statement I am using in a textbox in a report:

=DCount("[Transcript_type]","[Diplomas_requested_per_month]","[Transcript_type]='Official copy'")

This report is based on a query. The query is called "Diplomas_requested_per_month". The fields in the query are: "Transcript_type" and "Request_date". In this query there is Between [Start Date] And [End Date].

I am attempted to count the number of "Official Copy" for a specified month.

I am propted to input the start date and ending date, it works great when I run the query. But in the report, I get a "#error".

I am thankful for who have responded to the previous posting of this issue, but I am completely lost.

Any help is greatly appreciated.

Regards,

Dion

View 3 Replies View Related

Reports :: Grouped Totals Report

May 8, 2013

I have a table with:

Invoice Number | Customer Name | Item | Item Cost | Invoice Date | Paid | Date Paid

Example of data:

AK001 | A Brown | Blue Car |1000 | 1/4/2013 | Yes | 20/4/2013
AK001 | A Brown | Red Car |2000 | 1/4/2013 | Yes | 20/4/2013
AK001 | A Brown | Yellow Car |500 | 1/4/2013 | Yes | 20/4/2013
AK002 | A Brown | Black Car |1000 | 7/4/2013 | Yes | 20/4/2013
AK003 | B Smith | Blue Car |1000 | 12/4/2013 | Yes | 25/4/2013

I want to create a report from this table that outputs as:

Invoice Number | Customer Name | Total Price | Invoice Date | Paid | Date Paid

Example of report from Example Data:

AK001 | A Brown |3500 | 1/4/2013 | Yes | 20/4/2013
AK002 | A Brown |1000 | 7/4/2013 | Yes | 20/4/2013
AK003 | B Smith |1000 | 12/4/2013 | Yes | 25/4/2013

Is there an easy way to do this.. or will I need to make a new linked table with the invoice number as a lookup?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved