how do i make the fields in my form uneditable(cannot delete or add but can copy a field from form), i tried setting the properties..allow additions deletions by setting it to no, but even then when i open the form and when data is dispalyed , if i go jus delete (say address field)a field it just gets deletd,
i tried locking the fields too!..nothing worked,
so how do i do this,?
p.s IF i set allow edits to No then i am not able to copy the field (say name has to be copied and pasted into another application or something) how could this be accomplished.
tried setting it in VBA as formname.form.allowdeletions=false , still no luck!
I am using Access 2010 and I have my tables hidden in the navigation pane (I don't have any concerns about users finding the tables to make edits), however I am looking to "lock" all fields on a form once a user saves the record. The concern is that when they go to enter a new record they may end up on a previous record and overwrite the information. My thought was to create a checkbox on the table that I can edit each week to lock records. At that point, what type of code can I create or use that will lock records on the form?
i have a form that doesn't allow edits... but i also have an 'inactive' check box.. how can i allow this to be editable.. without the rest of the form editable? thanks.
I am making a library database which would be used in a school. I need to make a form which allows me to type in the persons id number then the persons profile will come up automatically then underneath there will be the persons book loans in a subform which i dont know how to do ...
So the top bit will have the persons details like personid, surname, first name, tutor group and then below there would b a subform with fields in from two different tables like from the book table there will be author surname, author firstname, bookname then from the loan table there will be the date the book was loaned field
The subform would also have to let me edit it so that i can add new loans or remove loans which i also dont know how to do but i was thinking if i had to add new records of the book would the subform have to autocomplete too? to save time typing all the details of the book
so so far i have made the tables added some test data and made relationships between the tables
a person can have many loans a book can have one loan
I think there is something to do with queries to make this whole thing work but I am totally lost what i have to do, I've been reading some forum posts which are similar about autocomplete forms which i have done but it wont work when i do it with the problem I have.
So what I have created is a form with 4 combo boxes which filters a subform with a click button by running a sql query.It was working great yesterday but then when I made the subform a pass through query it seems to no longer run (or just runs so slow it takes a large amount of time to query). To get a better sense of what I'm talking about I basically have a button and inside of the button it takes this query template:
SQL = "SELECT * FROM queryname WHERE 1=1"
concats with if statements to the end of the Where clause with the values in the combo box and then sets
subFormName.Form.RecordSource = SQL
how I can get this table to query...Also, for my second question, is it possible to make this pass through table editable after I filter it?
First post :) found some great tips on here. Anyway here is my story and question.
I am new to Access development. I know what I want to do, I just can not find a way of doing it :( .
1) I would like my form to only be editable when an edit button is clicked. I am not sure if I can do this on a form level or if I have to change each individual part. Any ideas?
2) I capture some clients details, title, first name and last name. I then need to merge the above 3 fields into one to create a 'policies in the name of' field. Is this posisble? I have tried using the initial value expression but am having no luck. Any ideas?
Hi. I created a form to be used for editing records. It displays ALL records in a "Files" table that match the BoxNo entered on a previous form. The record source is a query which has a relationship between the tblBoxes (one) and tblFiles (many). The records are showing in the form correctly but it will not allow me to edit.
I have set the allow edit, addition, deletion properties of the form to YES, and data entry to NO. Fields are not locked, and they have active tab stops. I also tried using VBA and set the datamode to edit.
I have created simple data base containing 2 tables connected each other and I wanted to make a form with fields taken from those tables and unfortunately it did not work and I got errors message.
Before I start to build the form do I need to create the query based on those tables and having the fields I need for the form? If yes, what sort of query, simplest one?
I have a form with split view and data it taken from different table using join query, is there any way i can add edit form data and original table data gets changed.
So i have a Calculated field in a table which is an expiration date. It adds two years to another field. Both field are on a Form. make the calculated field editable because some of the expiry dates are not necessarily 2 years. How do i change this?? do i need to like code it? i have no clue how to even start.
I have a combo box linked to a look-up table. There are 8 fields in the look-up table but only if one of three is chosen do I want additional combo boxes to become visible. Do I put the code in the "after update" or "on change" event of the combo box and how do I express the code-
If TechniqueCombo="caudal" or "spinal" or "epidural" then TextNeedleType.Visible=True
hi, i am creating a website with flash, asp and an access database. in my database i have a 'users' table with the fields, username, password, score, and access level. the score is automatically set to '0' at the beginin, as the user does various things on the site, it begins to adjust their score. eg. they answer a quiz, and they get 7/10 so the 7 points are posted to the database, and the score is 7. in my access level field, i have used the lookup wizard to have 3 options, level 1, level 2 and level 3. what i want is the access level to automatically change for each user depending on their score. so they start on access level 1, and once they reach 50 points, they get to access level 2, and past a 100, access level 3 if you see what i mean. i will then be using these levels to restrict certain users from certain pages. just wanted to know how this can be done in my simple ms access database. thanks
I have a form that has invisible fields. Depending on the navigation to the form, those fields are turned on/off using the visible command.
However, the tab order on the form always takes the user to the first field visible on the form.
How can I tell access to default me a specific field first.
i.e. I have chosen to amend a training file via payroll number. I would like the payroll number data entry box to be the active field when the form opens.
When I run this query, the fields in the new table contains 253 characters. How do I specify in the SQL command that the field Carg2 and Carg3 will contain 3 charachters ?
SELECT dbo_allesc.AccReport, Left([AccReport],2) AS Carg2, Left([AccReport],3) AS Carg3,......................... INTO regTabell
The first is ClientList, which contains typical contact and biographical information (name, address, citizenship, etc), and unique ClientID# for each client. The primary key for this table is the default Autonumber ID that comes with each new table.
The second table is WillInfo, which contains information specific to drafting the client's Will (e.g., spouse name, spouse address, spouse citizenship, similar data on beneficiaries, similar data on executors, etc). The primary key for this table is ClientID#.
I then created a One-to-One relationship between ClientList and WillInfo, binding by Client ID. All this appears to work.
My question arises because I have two clients who are married to each other, which means much of the spouse info I require for the WillInfo table in respect of these particular clients is already accurately recorded as client info in the Clientlist table. So for these specific clients (but not generally!), I want the spouse information in the WillInfo table (e.g., SpouseAddress, SpouseCitizenship for ClientID# 12.001) to EQUAL specific values provided in the ClientInfo table (i.e., ClientAddress, ClientCitizenship for ClientID# 12.002).
I read and understand this is the best approach, following the principle that data should not be entered twice, so as to increase efficiency and avoid mistakes and future problems.
My question is: How do I do this? In Excel, if the client info I wanted to replicate was in cells B4-B9, I would enter =B4, or =B5, or =B6 and so on in the cells for spouse info. What is the equivalent expression for replicating specific client info from a different table.
how can i make the combo like the user cannot enter the vales into that? i want the user to only select the values from combo.He should not be able to enter values into it.
I've spent about an hour searching this site for email issues but most I found we how to send. I want to take existing data and make an email address. I have a FName field and an LName field. In my email field I want FName.LName@email.com. the @email.com will always be the ending. Also where (on gotfocus) is the best place to put this code so it autopopulates after the FName and LName are entered?
I have a table that has several fields that contain a date if a user is licenced to use a certain piece of equipment and is null if not. Each recor has other data in it such as name, and a unique identifier (numeric). What I want to do is make a list of the fields which have a date in them to create a licence for what they can operate. Any help on which way to go...pretty new at access.
If I have a make table query where I want to add in some blank fields, say: Field1: “” , Field2: “”, etc…. is there a way I can make these fields a yes/no type instead of the default text?
I know I can manually go into the table in design view after I run the query, but I was hoping I could do it beforehand. :)
hey, i hav seen a similar thread about this (i think bout a year ago or so) and i didnt no whether to continue it or start a new thread.Option boxes - Making items visible that thread did not fully answer my question and after searchin around n finding nuthin i hav decided to ask
in my form i have the payment methods=> cash, cheque, credit. i did have these in a drop down menu, but i wasnt sure how to do what i wanted...which is based on the selection either make a couple of fields (credit card details etc) visible or invisible. so what i have done is changed the drop down list into an option group with radio buttons. i currently have this coding
this seems to work although say if my first record has credit card selected, then all the fields are visible, but wen i move onto the next record which is cash or cheque...they are still visible until i reselect cash or credit again..(and vice versa)
I am developing a Make Table Query from 2 tables, one of which has an "Employee Name" field (lastname,firstname) and the other table has separate fields for LastName and FirstName. I've been able to accomplish almost what I need by:
WHERE ((([Table 1].[EMPLOYEE NAME]) Like [Table 2].[LAST NAME] & "*"));
Which works fine except when there are 2 employees having the same last name, then it generates duplicates. I suspect there must be a way to do this by incorporating the first name field in the sql statement but that's beyond my ability. I realize that names are not good things to base a query on, but the 2 existing tables have been preset and populated by others and I don't really have the capability to change them.
I have a form consisting of a list box and some fields belonging to a single record. When the user highlights a row in the list box then the fields show the details of that record. Now the whole process is Read only. But I wish to put a toggle switch on the form so that the detail fields of the record become updateable. I have tried the following constructs but I could not make those fields updateable.
I am making a manual for work using access to save all the commands we use. I have a drop down box to determine the command. I want to have fields users fill in and system adds to commands and displays output on screen. Example INFO1 and INFO2 would be what person added in a box. I want the output to be able to be copied as full line.
RTRV-T3:INFO1:INFO2:<CTAG>;
I have taken some basic Access and SQL classes. Is there a way to do this in Access.
