i am very new to access and even vba. I have a form called FrmAgent. Here there are 5 check boxes [CheckBob] [CheckJim] [CheckNikita] [CheckNoe] [CheckKyle]. I have one button named "RecieveData". I have one table named "Agent" and a query called "QryAgent". in the same column there are five people Bob Jim Nikita Noe and kyle. What i need is to have the button when its clicked run my query to produce the data. However, if multiple boxs are checked i need the data for those people. As of right now if i click the button (doesnt matter how many boxs are checked) it gives me data for all five people. Is there a way i can do this where i can receive the data only for the people that their boxs are marked?
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
I have several check boxes, that are however categorised, in my form. I was now wondering, in order to save some time, how could I make a check box that marks/unmarks all the boxes under that specific category ??
I am using a yes/no field to select a number of records for a report. Is it possible to deselect and turn them all back to no at one time when finished with the report. It would be nice if I did not need to deselect all of them individually.
I have a table and in that table I have multiple columns one being check boxes and another is the description. There are others but these are the relevant ones. I filter under description for HR Payroll but this description is not uniform. After HR Payroll it could vary so the description is not always the same. I want to select all check boxes under this description and was told use a query no clue how to do that though.
I have a form that has three checkboxes (IDDocument, DrivingLicence and Certification) on it. What the form is looking to do is based on the selection it will open a scanned document of the requested documents. There are 5 permutations that could be selected (either first on only, second one only, third one only, first and second and first and third). How do I code the IF Statement this so that the system will look at the different options and then do certain things accordingly.The code I have at the moment is:
Public Sub ProcessRequest_Click() Dim Form1 As String Dim Form2 As String Path = "Staff" & Me!EmployeeName & "" If Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = False Then
Do one thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = True And Me!Certification = False Then
Do a second thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = False And Me!Certification = True Then
Do a thrid thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = True And Me!Certification = False Then
Do a forth thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = True Then
Do a final thing
End If End Sub
All the bits work (the form stuff) but my IF statements are not working. It seems that access is seeing the checkboxes as null and so the IF is not working when i check box 1 and leave the other two unchecked.
I have a form named Member, this form has field named hobbies, this field has multiple values selection i.e. a user could select football, cricket, listening to music and etc. these values are stored in another table and i have looked up the values in my form named member, i know access has multiple value option in combo box while we look up values from another table, but i don't want that the check boxes appear in combo box, they should be listed right in form so that i can see them without going inside the combo box and at the same time the values of these populated check boxes should be stored in a single field.
I have a table of data regarding companies (contact info, etc). The company I work for provides these companies with up to 10 different products. On my input form, I have created 10 check boxes (and thus, 10 columns of Yes/No data in the corresponding table).
Each company has at least 1 product checked off, and up to all 10.
I would like to create a combo box that lists all 10 products, and upon selecting one, a list box then populates with the names of the companies (primary key) that use that specific product.
So, for example,
Company A buys CATS and DOGS from us Company B buys DOGS Company C buys CATS and ELEPHANTS Combo box options: CATS, DOGS, ELEPHANTS
If I choose DOGS, then a list box gets populated with:
Company A Company B
and when I click either of these, the record should be brought up for the respective company.
All of this should take place in the header of the form, while the form itself can be updated based on search selections.
I have a form I am creating from a query that has numerous yes/no checkboxes. I have been able to enter over 2/3rds of the yes/no boxes. However, I'm trying to enter the last of these into the form, and they suddenly change to text boxes. When I go back and check the query, they have also changed to text boxes there as well. I've checked and re-entered the data from the table to the query and finally to the form again. Same thing happens everytime. Any idea what's going on here? Thank you ~
I have a query problem that I have had no luck solving either through books or other post on this fourm. It might be because of my lack of Access skills or just might not be possible. I have a query that looks at one field in a table to count how many records have the check box checked. It works great when the query can find at least one as it reports it back, but when there are none with the boxes checked it comes back blank. What I really need it for when there are no records checked for it to come back with a 0. I have tried using NZ with no luck. If anyone has a solution to this either using NZ or some other way please let me know. Also please explain in beginner terms as Im still learning.
Can someone tell me why my check box selections on my form aren't inputting into my table?**BlueStreak and Rework are check boxes on both the form and tableINSERT INTO tblRules ( Origin, Destination, [Road to], Train, Block, Junction, [T/C], [L/E], [S/R], BlueStreak, Rework )SELECT Forms!AddForm!txtOrigin AS Expr1, Forms!AddForm!txtDestination AS Expr2, Forms!AddForm!txtRoad AS Expr3, Forms!AddForm!txtTrain AS Expr4, Forms!AddForm!txtBlock AS Expr5, Forms!AddForm!txtJunction AS Expr6, Forms!AddForm!txtTC AS Expr7, Forms!AddForm!txtLE AS Expr8, Forms!AddForm!txtSR AS Expr9, Forms!AddForm!chkBlueStreak AS Expr10, Forms!AddForm!chkRework AS Expr11;
I made a database on a survey that I want my agency to fill out and return. I need to know how many checked off yes for each question. I can't figure out how to run the query to get the count of all of the check marks. Please help!
I am running a simple query. Three Fields Customer Standard SLA Non Standard SLA
The two SLA fields are Check boxes. I wish for the query to bring back only the customer name if the check box is ticked. I have tried putting Yes, True and -1 in the criteria. Some come back with no results and others come back with all the Customers listed even though not all have the field checked. What should my criteria be to only show the checked boxes. What am I missing?
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change() Me.Requery Me.cboCourseName.Requery Me.Check178.Requery End Sub
Hi, I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks. By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
I have a problem building a query using multiple check boxes. The situation is as follows:
I have a database to monitor enquiries which come into a central email account. I have devised a system where several check boxes are used to define the nature of the enquiry. Users can tick any number or none of the options to describe the enquiry.
I would like to create a query where users can search the database based on the check boxes which have been ticked. For example, if users want to search for enquiries where a specific three check boxes have been ticked, I would like all of the records where these three boxes are checked to appear, and so on for all different combinations of check boxes ticked.
I've tried a few methods, including creating a seperate form for the query where users check their search criteria in line with the enquiry form, but I can't link this with the original form.
I hope my description adequetly conveys the problem I have!
I have a table(Product Change) with these fields: Tracking Number Approved (a check box) Engineering (text box that represents department) Purchasing (text box that represents department) Quality (text box that represents department) Production (text box that represents department) Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value. So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
I really hope someone will be able to help me with this one as I am sure im just missing something simple.
I have an unbound form which has 20 yes/no unbound check boxes. The purpose of the form is to allow users to tick the various fields and a subform return the results. The subform, which does requery when a check box is ticked is based off a query. Initially, I wanted all the records to display before any check boxes are ticked so I have used the following criteria:
Like IIf([Forms]![Search]![Field1]=False,"*",[Forms]![Search]![Field1])
Which basically reads if field1 is no then display all records, else display all yes. Now that works fine but what I would like to have working is that if a client ticks field1, field2, and field3 it displays all records that have ‘yes’ in either field. Currently, if more than field is ticked the query treats it like:
Field1 And Field2 And Field3 And etc = true
I want to be able to select several check boxes and have the query return results for each check box that was checked. I would like to avoid doing this by having an append and delete query per checkbox.
Im trying to do the following query work. I have a form, with combos , text fields which are filled in with parameters. The query I want to make is complex. For example we shall use field1, field2, combo1 , combo2 for explanation. I want the field1 param AND the field2 AND combo1 AND combo2 to be evaluated for a result. At the same time, I want the user to fill in only field1 and combo1 or like that and the result to be right. Is there any possibility to make them all work at the same time, individually, or in combinations ?
Sounds too Complicated ?
I ve managed to make it work only by filling in individually the fields or combos and have the right results. The other ways didnt.
I am currently having problems with a multiple criteria query with combo boxes (see attached file).
The problem:
- When user defines all 3 criteria (e.g. selects Project: A, Category: Services and Equipment Type: Packages), the query returns a result - no problem here.
- When user defines no fields (i.e. all combo boxes empty), query returns all records - again, not a probelm.
- However, say a user wants to display all records belonging to just Project: A, for example, the query returns no records. Obviously, there a a number of combinations of this (another example would be a user wanting to show records from project: B, with Category: Equipment Type).
I have included the Is Null statement in the query but to no avail. Could anyone advise on a solution based on the attached database. Your help would be greatly appreciated!
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
Hi In my tables I have set a field to Yes/No and the format to be True/False. When I activate the table it shows the field as a checkbox, however when I create a List Box on a form to that table it displays the fields as True/False, how can I get the list box to also display the field as a checkbox.