How To Show Extra Fields In A Form If A Value Is Selected
Nov 30, 2011
I'm using Access 2003 (with Windows XP).
I'm intending to make two extra fields open up if a particular value is selected. Just as a simple example:
Field: Type of Item
Possible Values: Alcohol, Beverage, Cutlery
So if either a beverage or alcohol is selected, I would like a new field to open up. For both Alcohol and Beverage, I would like "Content of bottle in mLs" to open up. For Alcohol, I would also like "Percentage Alcohol content" to also open up.
So basically, if a specific value is selected, I would like extra fields to come up. I'm not sure if there's any simple way to do it, or whether it requires VBA coding, but either way if it is possible I would like it to be done.
1) How do you make an input mask enter from right to left? For example, if post codes can either be 4 or 5 digits long, I put 90000 (requiring at LEAST 4 digits) but if you start entering data, it starts from the 9. Would it work if I did 00009?
2) Is there any way to make a form go through a progression of screens rather than all the input fields being on the one page?
Using DAO recordset, table enters unbound fields data properly for desired records, but adds an extra record which is a duplicate of the first record entered....any known access quirks for adding unwanted records?
The situation is i have two forms, looking at the same table, but the main table shows more records, I would like to select a record in the datasheet subform and have the main form flick through to the corresponding record.
I have a suppliers table and a products table. Two forms, Stock form with combobox to list Suppliers and a sub form with combobox that lists Products.I want to select a supplier from the Stock form and then the combobox in the subform to only list products directly sold by the Supplier.Have dabbled in SQL as follows:
SELECT Products.ProductID, Products.ProductName FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID = Products.SupplierID WHERE ((Stocksubform.SupplierID=Stock.SupplierID)) ORDER BY Products.ProductName;
I am building a tracking database where we would be able to track information which field are null data and report them to our Administration to fill the null data. For this I have created a form name "Search" and I have a combo box control on that form which is bound to "Table = employee" and its ROW SOURCE TYPE="Field List", I would like to able to query records where the selected value in this combo box is null through out the table.
For example if I select "Telephone" from this combo box dropdown, I would like the query to show all the records where the "Telephone" is null, how to set the criteria in query to take the combo box value as "Field Name" and then compare it with the Field/Column in the table and show the null values.
Hi Does anyone know how to delete the extra blank fields you get at the end of a query. I am converting the query to a handheld database with a field limit and the extra fields push my field count over the limit. i have tried just 'deleting' them but they reapear when I reopen the query. they definitely count as fields because if I delete some real fields i can do the conversion. i dont want to alter the structure of the original database as it has been in use some time and works well. any ideas advice Thanks supateach
Hi again I am still having problems with too many fields in my query so it will not convert to a handheld database. I have tried making a test query (with the wizard)from the same table and sure enough there are extra fields at the end, which do not come from the table, which reappear after they have been deleted, when you reopen the query. I have attatched the query to illustrate that I have deleted the fields and then they reappear. It does appear to be impossible to get rid of them, in which case I shall have to decrease the number of 'real' fields to get below the max the handheld can convert. Any advice gratefully received Thanks supateach
Is it possible to have an extra field that is added to the calculated weeks left? Such as what if I want 2 extra weeks instead of the 12?
I know this is probally an advance question! Thanks in advance!!!
This is the awesome example from sbenj69:
Expr1: 12-(datediff("ww",[join date], date())
What I want to do is add another column which will have an additional number. The additional number would just be added to the 12- part of the code. So if I have a field with 2 in it, the 12- would become: 14-(datediff("ww",[join date], date())
Is this truly possible or is it something that can't be done in access
I have created a form with combo box which shows certain fields I selected. By clicking that I want to open a NEW form which has all the fields so that I can edit the record.
I have built a form that holds details of training records. What I want is when a drop down is selected in the main form, that it will populate some of the fields in the subform. I have this working at the moment, that for example, when a certain course is selected, that their modules will appear in the subform. Where my problem arises is that I have a relationship between two tables that I want to appear on the subform, so that details can be filled in on the subform against the list of modules that automatically appear.
I have a main form with several continuous subforms on it. These subforms are based on a selection of fields of a complete and editable form, so these subforms are overview forms so to speak. Whenever a field of a certain record is clicked, the other subforms show the linked data for that record, whenever a field of a certain record is double clicked, the corresponding form opens so data can be edited.
I would like to show which record is selected (record selectors are not enabled) in the way you select text in any application in windows. So when record A (holding fields A1, A2, A3 and A4) is selected in any way, the text should be lit up as if struck with a text-marker pen.
How do I go about that?
It would really be nice, since there is a cascading effect of records going on in the main form, which can get a bit confusing if you have to or want to glimpse at which record is selected. So for ease of use, this feature would really be nice.
I have a form that is just a display/edit type form and I don't want a blank "new" report to show at the bottom when it is opened up. Is there any way to turn this off or disable it?
i'm a begginer at access, so please excuse me if this question is very basic. i have a multiple table select query which shows me which user has which piece of a equipment at that given time. I also have a form that logs any problems the users have with the equipment, what i want that form to do is show the results of the query based on inputting the users name. ie put the serial number and model number into the relevent fileds on the form. I can get the form to run the query but that just shows it in the query window, i need it to show on the correct feilds on the form.
Hope that makes sense and that somebody can help me.
I have form that is tied to a query. When I enter criteria that matches what i have in the table, it returns the infromation on another form fine.
However, if there is no data for the criteria I am entering, I get a blank form. Is there anyway to have the fields of the form show even when there is no data?
I want to create form with 10 checkbox, each checkbox is linked to a field "name, Address, TelephoneNumber, BuissinessName" I would like to know if it is possible for the user to check the box and then the field will show in query. if only name is check then only name will show in the query.
I have tried using [Forms]![Formname]![CheckboxName] as criteria but this didn't work it when I had more then one checkbox and when the one check box was not checked nothing showed in the forms.
I have a form that I want to expand to show more fields depending on whether a user decides to or not.
Basically there will be 5 fields that a user always completes for this form, however depending on whether they answer yes or no on the final field I want it to expand the form and have some further fields that need completing.
If they select yes it should expand, if they select no then the form is complete.
I have a form that has four combo boxes on it that enable the user to select entrants in a golf tournament for tee off times and tee. (I have attached part of this database to this post) It all works fine but after selecting the first player in the first combo box and then selecting the second combo player I would like the player selected previously not to show up. Is this possible or do I have to rethink the way players are selected.
What I want to do is... open a file dialog from VBA "This of cause is no problem" the file dialog is opened from a double click function of a textbox holding a link to a picture, what i want to happen is... when the explorer opens I want it to show only the picture that was linked in the textbox.
Example "C:markPhotosPicture 085.jpg"
the code i have so far is as follows...
Private Sub FilePathLbl_DblClick(Cancel As Integer)
Dim fFile As String Dim fd As Office.FileDialog Dim retVal As Variant Set fd = Application.FileDialog(MsoFileDialogType.msoFileDialogFilePicker)
[Code] ....
It opens in the correct folder but it shows all the pictures in that folder.
Any way, I have created a table "accountstbl" to which i have AccountsID, Accountnumber, Accountname, Accountaddress, Accountcontact fields.
My question is i created a form with a combo box linking it to the accountstbl and Accountname field. When i click on the combo box it lists all my Accountnames from the accountstbl which i want but i want to click on an account name and once selected it will show a report of the selected name.
Reading through lengthy pages there is reference to event procedures but this is code which i do not know.
Simples is me select name from combo box and voila you have a report of your selected account name.
I am trying construct a form that will only show an invoice if all the invoice records have been approved. I have created a form that will allow the user to look at each line of an invoice and has a checkbox to approve it. If the user has selected all the boxes it will disappear from the Approval view, which is a query that shows unique values.
The problem is that if all of the lines but one are checked it will also show up in the view for the unapproved invoices AND the approved invoices. I would like to know how to structure a query that shows unique values but ONLY if ALL of the invoice line items have been approved.
How would I create a relationship between a subform and a coverage field such that when i multi select items in the subform, it will show what items are selected in the coverage field as in the example.
What I am trying to do is create a master table which references the every other table.But the primary key references another primary key.I can get the combo box to display all the options, buy shows options already selected for other records.in other words...
I have 4 reference IDs from table A. (ID1, ID2, ID3, ID4)
Master_Table has a combobox to select between the IDs. if record 1 has ID_1 Record 2's combobox will show all 4 IDs If I only have 1 ID that can be put into record 4, it's combobox still displays all 4 IDs.
What I want is: If ID3 is selected for record 1, it wont be displayed in the comboboxes for the other records.
I have a form that looks and prints exactly as I want it to, except for two little things. These things are extra pages. They don't appear on the print preview, but they always show up on the printer and on the pdf file when I email it. One page is blank and the last page has "Page 1 of 1" at the bottom right corner of the page. I would always limiting the printing to one page.
