I need to make a filter by using Macro in Access 2010..So in "Where Condition" I should put an expression belong to the poth of the fields. I now how to use "Where condition" but only for one field like below :
Code:
="[TabReq_No]=" & [Text2]
I have a macro set to email a form to a person once a condition is met. This works fine but I've discovered that Outlook (2010) has to be open BEFORE this macro is invoked.
I wanted to add a step to the macro before the one that makes it email that basically says to open Outlook.
I have tried the RunApplication macro, but I apparently am not getting the path right. I don't understand what the problem is.
I accidentally dragged Outlook to my desktop and therefore created a shortcut from my Start Menu, but now when I go to Microsoft Office in my Start Menu, Microsoft Outlook isn't one of the options. I can't find the path to where it may reside now.
I am using the path to the shortcut on my desktop.
C:UsersJust MeDesktopMicrosoft Outlook 2010
What else am I supposed to do?
i'm using Access 2010 and i created a main form , from which i want to let users to open new table with fixed fileds and rows, also the name of the table will be as per user choice. so if a user want to open new table from the main menu, he will have the choice to press on a command button and a dialoge box will ask to name the table. the new table will then be open with the same fileds and rows names( name only) . the new table will be edited using a form.
View 3 Replies View RelatedWhat I want to do is have the SQL printout list all the fields in a table that I have already created. Also how would I enable SQL view? Im new to Access.
Using Windows Vista and Access 2010.
I am trying to find an average of four fields in either a form or query. Basically I have figures for [Grade 1], [Grade 2] but [Grade 3] is an empty field. I need to include all three field because there are sometimes 3 grades, but a majority are 2 grades. How to do so?
View 2 Replies View RelatedFor some reason our database keeps "not responding" ...
The application stops responding when:A field is selected that has a input mask
A combo box is highlighted (forcing the drop-down menu to open)
Certain buttons are pressed (in fact all but two trigger not responding, why the two buttons are immune)
if I put a break point on a section of code that runs when I press a button (any button, it doesnt matter) and I then press the button which takes me to VBA, to the break point. Then I press F5 to continue to run the code until the function ends (essentially doing nothing, just running the code to the soonest break point I can in the function and then running the rest of the code as normal...) it all works fine again!!!!
I fixed the issue by creating the function:
Code:
Sub aiuewjgaop()
End Sub
saved the database, deleted the function and then saved the database again.
I inherited a defective Access 2010 and am now attempting to import a RECORD consisting of fields of xls data.
I am attempting to import from an existing Form Datasheet so that it overwrites (or appends the new data to the datasheet) from another identical Form Datasheet because it contains an additional 1000 contacts in it.
I have resulted to Using an .mdb file from over a year ago because the current .mdb keeps hitting "The Microsoft Access database engine could not find the object (Error 3011)"
My initial opinion is that the more recent .mdb it is corrupt.
I have staff table which is a lookup field on the phone call table.when the phonecall form opens I want the employee field to auto fill in the employees name from the lookup field according to there security level.so something like this
On Open
Select Case Forms!frmLogin!cboUser.Column(4)
Case X = 4'the employees security level'
Case X = Insert Table_tblPhoneCalls!EmployeeID"4" into Form_frmPhoneCalls!Employee.
End Select
of course this is a syntax error as I do not know the correct code words.
I am using Microsoft Access 2010.
I have a form, having following fields
Nationality, Combo box, Options are Indian/foreign State: With list of States in India.
What I want is, when data entry operator , select, Foreign, State field automatically hides.
And when data entry operator , select Indian, State field shows in the form.
How this can be done in Access 2010
I have a MS Access 2010 application when the User opens form CONTACTS Form
â—¦User finds single record to be used CONTACTID is identifier to be used for selection
â—¦User clicks button to open form frm_MAIL_MERGE
â—¦Frm_MAIL_MERGE has a drop down combo box that reads the folder location where the application resides and displays all .DOTM files (that is all template files) and one more combo box which contains the CONTACTID.
â—¦User selects single .dotm file for merge
â—¦Frm_MAIL_MERGE has either drop down to select CONTACTID or UNBOUND data field for user to type in CONTACTID number
â—¦User enters CONTACTID to be used for the mail merge
â—¦User selects SUBMIT
â—¦Application merges selected .dotm file with the information in table CONTACTS for the selected CONTACTID
â—¦Merged document is saved on the user Desktop as xxx.docx
Is it possible to have a value in an excel 2010 cell be used to update an access 2010 db?
For example, if in a spreadsheet "test" cell A2=3 then in a db "test" a column "value" is 3. However, if the value in the spreadsheet changes so does the db.
I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?
Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.
I’ve created a report containing two labels and two text boxes. The “Record Source” for the report is Tbl_MasterList2. The control source for both text boxes is named field4 and field5, which are based in Tbl_MasterList2. As a result, my report displays all records from Tbl_MasterList2, field4 & field5 including those, which are blank.
How do I write an expression in my report that will allow me to display the values in field4 if filed2 = stringXYZ?
I have a query which working fine:
Code:
strSQL = "Select [nazwa], [id_wycena_pre], [Format_(X)], [Format_(Y)], [kolory p], [kolory t], [nazwa_id], [iloscstron], [numerarkusza], [naklad_pracy], [Kolory P], [Kolory T] from tblGoraZleceniaNowaWyceny where [id_wycena_pre]=" & Forms!frmWycenyObszarRoboczy!ID_wycena_pre & " and [nazwa]='" & "środek" & "' or [nazwa]='" & "okładka" & "'"
Set rst = CurrentDb.OpenRecordset(strSQL)...
But now I would like to add next condition to this query
Code:
where [kolory p] is not null or [kolory t] is not null
- these fields are string
I don't know how to write this condition and add to my exiting strSQL string
Windows XP
MS Access 2007
VBA experience is very limited
So in my forms 'BeforeUpdate' property I want to validate whether a condition is met. The condition is whether 'any one of 4 fields contains something (text or number)'. I have written this code for validating a single condition and it alerts if the field is left blank. This code returns a warning message when the field is blank.
If Me.[txtObjective] & "" = "" Then
MsgBox "A 'Problem Objective' is required, please complete this field.", vbOKOnly
Me.[txtObjective].SetFocus
Cancel = True
[code]...
how to write the SetFocus part. And I dont know if this is correct anyway.
Hi,
I hava a small dbase in which we store address information. Now you have a visit address, a mailing address and billing adress.
I want to use some buttons which trigger macro's to fill in these "Secondairy" addresses FROM the visit adress.
So a buttun that says: copy billing address from visit address. and then the street, Number, PO box en city will be copied from the visit address to the billing address.
It's probably possible through a macro but I'm having a hard time coming up with the syntax. Or it there an easier way? :confused:
I hope you guys can help me out. THANKS!!
I'm relatively new to Access 2010.
I want Access to look in one table for a certain condition, and if it is true to autofill text in a different column but I've never done this before.
Specifically, I have a column in a table that is named "Letter Received" and another named "Letter Received Unsigned" which is in date format. I want Access to write "N/A" in the "Letter Received Unsigned" column if there is a date entered in the "Letter Received" column.
I have a form with various text, date and combo controls. There is a button at the button that runs a macro (Close NB) at the bottom. What I'm trying to do is bring up a msgbox if certain fields are blank and not run the macro. I only want the macro to run if all the fields specified have data in them.
The fields are :
cmb_cliname
cmb_disease
cmb_projectType
cmb_ProposalStatus
The on click code is:
If (Me.cmb_cliname Is Null) Then
MsgBox "Please fill in the relevant details",
ElseIf (Me.cmb_Disease Is Null) Then
MsgBox "Please fill in the relevant details"
[Code] .....
I think what I want is:
1 table(1): record of people & contact details
1 table(2): list of events with check box's with the names of people from the other table
1 report: listing how many events people have attended.
When I add a new person to table 1 I want a field to be added to table 2 in the form of a checkbox, also when I delete this person I want this field to be deleted in table 2.how to make this an automated process.
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
I have a form that has a listbox and a subform. The listbox lists names of events, start date and end date. The subform bellow reveals names of participants to the event that is clicked in the listbox. Against each participant's name is a button to delete the participant.How can I hide or disable the delete button if the start date of the event is past?
View 1 Replies View RelatedI am pushing some data to Excel from an Access query. When the data is in Excel I reformat the sheet by changing the fonts, applying borders and cell formats - I have got all of this to work fine.
The one thing I am struggling with is applying conditional formats. I am pretty sure it is something to do with incorrectly referencing the applcation/sheet. An extract of what i think to be the key parts of the code are below.
....
Dim ApXL As Object
Dim xlWBk As Object
Dim xlWSh As Object
...
Set ApXL = CreateObject("Excel.Application")
Set xlWBk = ApXL.Workbooks.Add
ApXL.Visible = True
[Code] ....
I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM
qryContractListSummarybyDateContract3TYPEBREAK WHERE
qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri
Masonry NSW');'
is there a way to have both Access 2010 and 2003 exist peacefully on the same desktop. My company uses Office 2010, but my department has an Access 2003 application. As a result, I have to have A2003 on my desktop and use it quite frequently for this one application.
I have some small databases that I really want to move onto A2010 so we can take advantage of SharePoint functions, etc. Is there anytning I can do to be sure that the .mdb and .mde open in A2003 and the new .accdb opens in A2010, without getting errors and the Windows installer going through the Office installation process for the respective version? I've gone to the file locations and set the "Open with" setting to the respective version.
I am trying to write a more complex macro that will start another macro at a preset time, however I am getting stopped at the first hurdle - getting a macro to run another macro.
Here is the code i am using at the moment, all I want to do currently is click the first button, then get the second macro to execute. But no luck, getting error 2157 "cannot find the procedure"
Code:
Private Sub Command3_Click()
MsgBox "1st macro running", vbExclamation, "Note"
Application.Run "teststart1"
' Application.OnTime TimeValue("19:55:00"), "teststart1"
[code]....
I have Access 2010 database.
I have a Reporting Dashboard form that inturn has many buttons to open up different reports and forms.
Now I have been asked to extend the access to a few other users with restricted access. The new users cannot see all the form and report buttons in the Reporting dashboard form.
How can i restrict this? They also need to be given separate logins and passwords. How I can accomplish this?